Raising machine from working position to transport position. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Raising machine from working position to transport position. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

8

8.8

Operation

Raising machine from working position to transport position

For the “pushed” version

„ Move the control unit for the front hydraulics into the float position until the mower has been lowered into the working position.

„ Move the control unit for the front hydraulics into the float position for mowing.

For the “trailed” version

ü The stop cock (1) on the hydraulic hose (1+) is open.

„ Move the stop cock (1) into position (I),

see Page 85 .

„ Move the single-acting control unit (1+) to the float position until the mower is lowered to the working position.

„ To mow, move the control unit (1+) to the float position.

8.8

Raising machine from working position to transport position

1

II

KMG000-118

For the “pushed” version

„ Actuate the control unit for the front hydraulics until the mower is raised to transport position.

„ Lock the control unit for the front hydraulics.

For the “trailed” version

„ Move the stop cock (1) into position (I),

see Page 85 .

„ Actuate the control unit (1+) until the mower is lifted into the transport position.

„ Move the stop cock (1) into position (II),

see Page 85 .

86

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents