Checklist for the transport of the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Checklist for the transport of the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

9.3.1

9.3.2

Driving and Transport

Preparing the machine for shipment

Checklist for the transport of the machine

ü All guards are properly closed and locked.

ü The universal shaft is secured.

ü The hydraulic hoses are secured on the machine against dropping.

ü Using a hoist with a minimum lifting capacity, the machine was lifted at the marked

suspension points, see Page 93 . The minimum load capacity depends on the permissible

total weight of the machine,

see Page 49 .

ü The machine is secured with suitable lashing material at the designated lashing points.

9

9.3

Lifting the machine

WARNING

Risk of injury due to raised machine

There is danger to persons when the machine drops or parts swing without control. Only qualified personnel are allowed to perform this work.

„ Use only permitted hoists and slings with a sufficient load-bearing capacity. For the weights

see Page 49 .

„ Note the information on the suspension points provided.

„ Make sure the lifting means are properly secured.

„ Never stay under the suspended machine.

„

If work has to be performed under the machine, securely support the machine, see

Page 25 .

ü The machine is in the working position.

ü The machine is dismounted from the tractor.

For the “pushed” version

1

942 012 1

942 012 1

2

1

942 012 1

KMG000-122

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 93

advertisement

Related manuals

advertisement

Table of contents