Lashing the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Lashing the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

9

9.3

Driving and Transport

Preparing the machine for shipment

The machine is equipped with three suspension points:

• The suspension points (1) are on the support frame.

• The suspension point (2) is on the headstock.

For the “trailed” version

1 2

942 012 1

942 012 1

942 012 1

2 1

942 012 1

9.3.3

KMG000-123

The machine is equipped with four suspension points:

• The suspension points (1) are on the support frame.

• The suspension points (2) are on the headstock.

„ Ensure that the hoist is mounted correctly on the anchor points.

To lift the machine, ensure that a hoist is used whose minimum lifting capacity depends on the permissible total weight of the machine; see chapter "Technical data",

see Page 49

.

Lashing the machine

WARNING

Danger to life caused by uncontrolled machine movement

If the machine is not properly lashed for transportation by vehicle, the machine may move in an uncontrolled manner and endanger people.

„ Before transporting the machine, secure it properly using suitable lashing material.

Before transporting the machine, secure it in appropriate places using suitable lashing material.

„ Ensure that the machine is lashed in such a way that it cannot move in an uncontrolled manner when transported by vehicle.

94

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents