Settings. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Settings. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

10

10.1

Settings 10

Setting the cutting height 10.1

Settings

WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

„

To avoid accidents, the basic safety instructions must be read and observed, see

Page 13 .

WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

„ The safety routines must be read and observed to avoid accidents,

see Page 24 .

Setting the cutting height

KMG000-035

The cutting height is adjusted via the top link (1).

Setting range of cutting height,

see Page 49 .

ü

The support jack is swivelled down, see Page 84 .

„ Lower the machine down to the support jack.

„

Shut down and safeguard the machine, see Page 24

.

„ Turn the top link until the cutting height is set.

ð Top link longer = smaller cutting height

ð Top link shorter = greater cutting height

„

Swing up the support jack, see Page 83

.

For version with "high-cut skids"

The cutting height can be increased using high-cut skids.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 95

advertisement

Related manuals

advertisement

Table of contents