Telescopic top link. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Telescopic top link. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

10 Settings

10.2

Telescopic top link

10.2

KMG000-025

ü The machine is in transport position.

ü

The machine has been shut down and secured, see Page 24

.

ü The stop cocks are closed.

ü

The machine is supported safely, see Page 25

.

„ The high-cut skids must always be mounted underneath the cutting discs that run next to the mower drums.

„ Insert the high-cut skid (2) into the sliding skid (1) and screw it in place.

„ Open the stop cocks.

Telescopic top link

96

KMG000-060

In order to allow the front mounted mower to adapt to the ground in the direction of travel, a telescopic top link can be purchased as optional additional equipment.

ü

The machine has been lifted into the transport position via the front hydraulics, see

Page 86 .

ü

The machine is shut down and safeguarded, see Page 24

.

„ To release the ground tracking in the direction of travel, shift the lockclip (1).

Setting cutting height

Setting range of cutting height,

see Page 49 .

ü The machine has been lowered into the working position via the front hydraulics,

see

Page 85 .

ü

The machine is shut down and safeguarded, see Page 24

.

„ To set the cutting height, loosen the counter nuts (2,3).

„ Turn the top link until the cutting height is set.

ð Top link longer = smaller cutting height

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents