Increasing/reducing ground pressure – mechanical relief adjustment. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Increasing/reducing ground pressure – mechanical relief adjustment. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

10.4

Settings 10

Increasing/reducing ground pressure – mechanical relief adjustment 10.4

Increase dimension X = reduced mower relief = higher ground pressure

ü The machine is in the transport position.

ü

The machine is shut down and safeguarded, see Page 24

.

„ Dismount the supporting chain (2) from the turnbuckle (1).

„ To reduce the ground pressure, reduce the dimension X.

„ To increase the ground pressure, increase the dimension X.

„ Mount the supporting chain (2) on the turnbuckle (1).

„ The supporting chains (2) must be attached identically on both sides.

Increasing/reducing ground pressure – mechanical relief adjustment

For the “trailed” version

1

+

2

KMG000-039

The relief springs (1) are used to adapt the ground pressure of the cutterbar to the local conditions. In order to protect the sward, the cutterbar must be relieved to such an extent that it does not jump when mowing or leave any traces of abrasion on the ground.

The ground pressure of the mower can be adjusted via the threaded spindle (2).

Towards (+) = higher mower relief = lower ground pressure

Towards (-) = lower mower relief = higher ground pressure

ü The machine is in transport position,

see Page 85

.

ü

The machine is shut down and safeguarded, see Page 24

.

„ To reduce the ground pressure, rotate the threaded spindle in direction (+).

„ To increase ground pressure, rotate the threaded spindle in direction (-).

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 99

advertisement

Related manuals

advertisement

Table of contents