Setting the side guards. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Setting the side guards. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

Settings 10

Setting the side guards 10.6

10.6

II

1

KM000-990

„ Set the stop cock (1) to position (III) when the desired relief pressure is reached.

Setting the side guards

KMG000-078

The protective equipment can be adapted to harvesting conditions by adjusting the guards. In order to avoid that crop stalks bend because the guards are too low, set the guards higher. To avoid that stones are slung away when the crops are low, set the guards lower.

ü

The machine is in the working position, see Page 85 .

ü

The machine has been shut down and secured, see Page 24

.

„ Fold up the side guards (1),

see Page 81 .

„ Loosen the screws (4).

„ Use the console (3) to adjust the height of the side guard (1).

„ Tighten the screws (4).

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 101

advertisement

Related manuals

advertisement

Table of contents