Setting swath width. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Setting swath width. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

10.9

Settings 10

Setting swath width 10.9

The degree of conditioning can be changed by adjusting the conditioning sheet using the lever

(1).

ü

The machine is in the working position, see Page 85 .

ü

The machine has been shut down and secured, see Page 24

.

„ Adjust the lever (1).

Æ In direction " + ": The distance between the tines and the conditioning sheet is reduced. The degree of conditioning is increased.

Æ In direction " ": The distance between the tines and the conditioning sheet is increased. The degree of conditioning is reduced.

Setting swath width

II

1

I

2 2

KMG000-050

The swath width can be adapted to the crops.

ü

The machine is in the working position, see Page 85 .

ü

The machine has been shut down and secured, see Page 24

.

ü

The wide spreading sheet is set all the way down, see Page 104 .

„ Loosen the ring nut (1) on the right-hand and left-hand machine side.

„ Set the swath flaps (2). Perform the same setting on right-hand and left-hand machine side.

ð To the outside (I) = wider swath

ð To the inside (II) = smaller swath

„ Tighten the ring nut (1).

„ Loosen the ring nut (1) on the right-hand and left-hand machine side.

„ Set the swath flaps (2). Perform the same setting on right-hand and left-hand machine side.

ð To the outside (position "I") = wide swath

ð To the inside (position "II") = narrow swath

„ Tighten the ring nut (1).

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 103

advertisement

Related manuals

advertisement

Table of contents