Maintenance – After the season. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Maintenance – After the season. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

11 Maintenance - General Information

11.1

Maintenance table

Components

Change/replace blades

Check/replace cutting discs/mower drums

see Page 130

see Page 139

see Page 134

Check/change retaining bolts (blade screw connection)

Check/replace retaining bolts (quick-change blades)

Check/change blade carrier (quick-change blades)

Vent friction clutch

Check/tension drive belt

Tighten screws/nuts

see Page 134

see Page 136

see Page 113

see Page 117

see Page 109

Check guard cloths

see Page 115

Check the hydraulic hoses for leaks and, if necessary, have them replaced by a KRONE service partner.

see Page 121

Check the electrical connection cables and, if necessary, have them repaired or changed by a KRONE service partner

Checking/setting all the machine settings

see Page 95

11.1.2

Maintenance – After the season

Components

Clean the machine

Lubricate the machine according to the lubrication chart

Lubricate the universal shaft

Release the springs

Grease the threads of the setting screws

Grease the uncoated piston rods of all hydraulic cylinders and insert as far as possible

Lightly coat with oil all those lever joints and bearing positions which cannot be lubricated

Touch up damaged paint and preserve uncoated areas with rust protection agent

Check that all moveable components move freely. If required, dismount, clean, grease and remount.

Park the machine in a weatherproof and dry location which is not in close proximity to corrosive substances

Move the machine every 2 months

see Page 116

see Page 145

see Page 144

108

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents