Cleaning the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Cleaning the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

11 Maintenance - General Information

11.6

Cleaning the machine

11.6

Cleaning the machine

WARNING

Eye damage caused by flying dirt particles!

When cleaning the machine with compressed air or with high-pressure cleaner, the dirt particles are slung away at high speed. The dirt particles may hit the eyes and hurt them.

„ Keep persons away from working range.

„ When performing cleaning work with compressed air or with high-pressure cleaner, wear suitable working clothes (for example eye protection).

NOTICE

Machine damaged by water from a high-pressure cleaner

Bearings and electric or electronic components can be damaged if you aim the water jet of a high-pressure cleaner directly at them during cleaning.

„ Do not direct the water jet of a high-pressure cleaner at bearings, electrical/electronic components and safety signs.

„ Replace missing, damaged and unrecognisable safety signs.

ü

The machine has been shut down and secured, see Page 24

.

„ After each use, remove husk and dust from the machine.

„ After the machine has been cleaned with water, lubricate all manually lubricated lubrication

points, see Page 145 .

11.7

11.7.1

Drive belt

Dismounting/mounting guard

116

KM000-387

ü

The machine is shut down and safeguarded, see Page 24

.

Dismounting

„ Release the locking screw (2) and remove the guard (1).

Mounting

„ Mount the guard (1) and lock the locking screw (2).

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents