Maintenance - Cutterbar. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Maintenance - Cutterbar. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

14

Maintenance - Cutterbar 14

Maintenance - Cutterbar

WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

„

To avoid accidents, the basic safety instructions must be read and observed, see

Page 13 .

WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

„ The safety routines must be read and observed to avoid accidents,

see Page 24 .

WARNING

Risk of injury from improper service and maintenance work on safety-relevant machine parts!

Improper service and maintenance work on safety-relevant machine parts, such as cutting discs and mower drums, and the machine components connected to them can cause dangerous imbalances or breakage during operation. As a result, persons can be seriously injured or killed.

„ Always replace damaged safety-relevant components, such as cutting discs and mower drums, and the machine components connected to them.

„ Observe the wear limits and check or replace the components.

„ Never modify any build-up welds.

„ Replace damaged components only with genuine KRONE spare parts.

NOTICE

Spare parts

Spare parts, which do not comply with the requirements of the manufacturer, may affect the operational safety of the machine and cause accidents.

„ To ensure operational safety, use KRONE original spare parts only.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 127

advertisement

Related manuals

advertisement

Table of contents