- Autoboil Mode. Panasonic KYT936SLEPG, KYT935XLEPG


Add to my manuals
80 Pages

advertisement

- Autoboil Mode. Panasonic KYT936SLEPG, KYT935XLEPG | Manualzz

EN-

32

Troubleshooting

Sounds and Noises

Symptom

Noise is heard during heating.

Possible cause

Various sounds may be heard depending on the type of cookware. You may feel a small vibration when you hold the handle and the cookware may move slightly.

This is not a malfunction. Moving the cookware slightly or replacing it may eliminate the sound.

The level of the noise from the appliance increases and decreases.

After the main power switch is turned off, sound from the fan can still be heard.

Clicking noise is heard at the start of flex cooking operation.

If the cookware is removed during heating, a short metallic sound may be heard.

It is the sound of the cooling fan inside the appliance.

The level of noise changes according to the power level and the material of the cookware. When the power level is increased, the fan will operate at high speed and generate more noise.

While the inside of the appliance is still hot, the cooling fan operates. When the appliance cools down, it will automatically stop.

This is not a malfunction. This is a part of induction heating technology. The noise is eliminated during operation.

Troubleshooting

Heat Power

Symptom

The heating power is weaker.

When multiple cooking zones are used together,

The heating power decreases.

The power indicator automatically decreases.

The power level can not be increased.

Possible cause

Overheating Prevention Function

If the base of the cookware overheats, the heating power will automatically reduce. The power indication will remain the same. The power returns to normal after the cookware cools down.

Unsuitable cookware, e.g. ceramic and earthenware pans, are used.

Do not use ceramic and earthenware pans even if they are for induction heating as they are not efficient.

(See page 15)

The power level is automatically regulated so that overall power consumption does not exceed the limit.

(See page 13)

The power indicator for a cooking zone may decrease on its own.

Even after touching the

slider to adjust power level, it may not increase the power level and the appliance will beep.

EN-

33

EN-

34

Troubleshooting

Autoboil Mode

Symptom

Heating time takes too long.

Water has not boiled after beeping.

Water has boiled but does not beep.

No power - heating does not start.

Possible cause

The base of the pan or top plate is dirty.

A lid has not been used.

Water was added to the pan during Autoboil Mode.

The lid is removed or the pan is moved during Autoboil

Mode.

The cookware size and material (e.g. non-stick coating) and the volume of water may affect the sensor detection.

Select a power level as required.

The top plate is too hot for Autoboil Mode. Autoboil Mode will start automatically when the top plate has cooled down.

Low Temperature Cooking Mode

Symptom

Preheating time takes too long.

The actual temperature is different from the set temperature.

Food is not achieving set temperature.

Possible cause

The pan is not in the correct position.

(See page 14)

The base of the pan or top plate is dirty.

Water, oil, or food was added during preheating.

The temperature on the base of the pan may vary from the set temperature depending on the type of cookware.

Due to the variety of food types and pans, the actual temperature of food may be different from the set temperature.

Cookware with a non-stick coating may affect the sensor detection.

Adjust the temperature as required with

slider.

No power - heating does not start.

The top plate is too hot for the temperature set. Heating will start automatically when the top plate has cooled down.

Troubleshooting

Pan Frying Mode

Symptom

Preheating time takes too long.

The actual temperature is different from the set temperature.

Possible cause

The pan is not in the correct position.

(See page 14)

The base of the pan or top plate is dirty.

Water, oil, or food was added during preheating.

The temperature on the base of the pan may vary from the set temperature depending on the type of cookware.

Adjust the temperature as required with

slider.

Deep/Shallow Frying Mode

Symptom

Preheating time takes too long.

The actual temperature is different from the set temperature.

Possible cause

The pan is not in the correct position.

(See page 14)

The base of the pan or top plate is dirty.

More than 800 g of oil has been added.

Hot oil, brown-coloured oil, cloudy oil, or oil with food sediment is used.

The oil temperature may vary from the set temperature or the preheating time may take longer depending on the type, material, shape and size of the base of the pan.

Adjust the temperature as required with

slider.

NOTE

If you cannot resolve the problems, turn off the main power switch and the circuit breaker. Turn them on again.

EN-

35

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals