Genius Sensor Cooking Chart. Panasonic KYT936SLEPG, KYT935XLEPG


Add to my manuals
80 Pages

advertisement

Genius Sensor Cooking Chart. Panasonic KYT936SLEPG, KYT935XLEPG | Manualzz

Flush-fitting

(measurement: mm)

This appliance can be fitted flush when installing.

Installing the appliance as flush-fitting

Only suitable for installation on heat and water resistant worktops such as marble, natural stone, solid wood (if cut out edges are sealed).

Mount onto other types of worktops only with the recommendation of the worktop manufacturer.

Remove the cushion from the underside of the appliance before flush fitting.

The internal width of the base unit must be at least as wide as the internal cut-out width for the hob. This is to ensure that the casing can be easily removed for maintenance.

Before sealing in, test that the appliance works. Grout the perimeter using a heat resistant silicone. Smooth the seal with a suitable finishing product.

Follow the silicone instructions and do not turn on the appliance until the silicone is completely dry.

R3

R3

870

17

490

5.5

904

524

29

CAUTION

Please observe the diagrams for the cut-out dimensions in granite and marble worktops.

Using unsuitable silicone may cause permanent colour changes to marble worktops.

EN-

48

Uninstalling the appliance as flush-fitting

Disconnect the appliance from the mains.

Remove the silicone seal from the perimeter with a suitable tool.

Push the appliance upwards from below to remove it.

CAUTION

Do not try to remove the appliance by prying it out from above.

Post-installation Checklist

Upon completing installation, check and mark off the following items.

Checklist

Appearance ■

Ensure that the appliance is not tilted.

Is the top plate clean?

Electrical work

Is the power supply a single-phase (220-240 V ~), or a three-phase (380-415 V 3N~)?

Has the earth been installed?

Has the earth leakage circuit breaker been installed?

Electrical testing

1. Touch

to turn on the main power.

Does the main power light illuminate?

Checked

2. Touch the following areas to check function of each cooking zone:

Left front

Left middle

Left rear

Middle front

Middle rear

Right middle

Right front

Right rear

Does flash?

Make sure to turn off each cooking zone and the main power switch after performing electrical testing.

Hand the Operating / Installation Instructions to the customer.

I hereby certify that installation has been completed.

Signature of installer

EN-

49

EN-

50

Specifications

Manufacturer

Model identification

Type of hob

Number of cooking zones and/ or areas

Heating technology

Length and width of useful surface area

Energy consumption per cooking zone or area calculated per

(EC kg

electric cooking

)

Left front

Left middle

Left rear

Middle front

Middle middle

Middle rear

Right front

Right middle

Right rear

Energy consumption for the hob calculated per kg (EC

electric hob

)

Power supply

Single-phase

Three-phase

Power consumption

Dimensions

(approx.)

Left front

Left rear

Maximum power consumption by cooking zone

(approx.)

Middle

Right front

Right rear

Flex cooking zone

Uncrated weight

(approx.)

Panasonic

KY-T936SL / KY-T935XL

Electric

5

Induction

4 x 19.1 cm (L) 21.0 cm (W)

1 x 28.6 cm (L) 21.0 cm (W)

206.2 Wh / kg

176.3 Wh / kg

183.5 Wh / kg

181.9 Wh / kg

180.6 Wh / kg

188.5 Wh / kg

190.2 Wh / kg

176.9 Wh / kg

190.3 Wh / kg

186.0 Wh / kg

220-240 V ~ 50 Hz

380-415 V 3N~ 50 Hz

10800 W

900 mm (W) 520 mm (D) 58 mm (H)

2800 W

2800 W

3600 W

2800 W

2800 W

3600 W

21.5 kg

Specifications

Equipment complying with IEC 61000-3-12

This product complies with the requirements of EN 60350-2:2013

(Methods for Measuring Performance - Hobs)

REP. EU:

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

EN-

51

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals