Burner. Miele KM 3010 G

Add to My manuals
48 Pages

advertisement

Burner. Miele KM 3010 G | Manualzz

Burner

Do not clean any parts of the burner in a dishwasher.

Cleaning and care

Assembling the economy, normal, and power burners

The surface of the burner cap will become more matte with time. This is quite normal and does not indicate damage to the burner cap.

 The burner should be dismantled and then cleaned only by hand using a solution of warm water and a small amount of liquid dish soap applied with a soft sponge.

 Clean any soiling from the flame openings.

 Risk of explosion.

Blocked flame openings can cause a dangerous build-up of gas in the base of the cooktop which could ignite and cause an explosion. This can lead to damage to the appliance and injury.

Ensure the flame openings are kept clean at all times.

 Parts of the burner that cannot be removed should be wiped clean with a damp cloth only.

 The ignitor and ignition safety device should be very carefully wiped clean using a well wrung out cloth.

Do not let the ignitor get wet. If it gets wet, it will not spark.

 Finally dry everything thoroughly with a clean cloth. Make sure that the flame openings are completely dry.

 Place the burner head   onto the burner base   so that the thermocouple   and the ignition electrode   extend through their respective holes in the burner head. The burner head must click into place correctly.

 Place the burner cap   flat over the burner head   . When correctly positioned, the burner cap will not slide about.

Ensure that all parts of the burner are reassembled in the correct order.

29

Frequently Asked Questions

With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department.

This guide may help you to find the reason for the fault, and how to correct it.

Problem

The burners do not ignite when the cooktop is being used for the first time or after it has been out of use for a longer period.

The burner does not light after several attempts.

Possible cause and solution

There may be air in the gas line.

 Try to light the burner again, making several attempts if necessary.

The gas flame goes out after being lit.

The shape/color of the gas flame changes.

The gas flame goes out during use.

There is a technical fault.

 Turn all of the control knobs clockwise to the   position and interrupt the power supply to the cooktop for a few seconds.

The burner is not properly assembled.

 Assemble the burner correctly.

The gas shut-off valve is closed.

 Open the gas shut-off valve.

The burner is wet and/or dirty.

 Clean and dry the burner.

The flame holes are clogged and/or wet.

 Clean and dry the flame holes.

The flames do not touch the ignition safety device and the burner does not get hot enough:

The burner parts are not positioned correctly.

 Assemble the burner components correctly.

The thermocouple is dirty.

 Remove any dirt or grime.

The burner parts are not in the proper position.

 Position the burner parts correctly.

The burner cap itself or the holes in the burner cap are dirty.

 Remove any dirt or grime.

The burner parts are not in the proper position.

 Assemble the burner components correctly.

30

Problem

The ignitor does not function properly.

Frequently Asked Questions

Possible cause and solution

The circuit breaker in the building’s wiring system was tripped.

 If necessary, contact a qualified service technician or Technical Service for assistance.

There is food residue stuck between the ignitor and the burner cap.

The thermocouple is dirty.

 Remove any soiling (See “Cleaning and care”).

31

Optional accessories

Miele offers a range of useful accessories, as well as cleaning and conditioning products for your appliance.

These products can be easily ordered from the Miele webshop.

These products can also be ordered from Miele Technical Service (see the end of these operating instructions) or your Miele dealer.

Stainless steel conditioner

250 ml

Removes heavy soiling, lime scale, and aluminum residue.

32

advertisement

Key Features

  • Black 62.6 cm Built-in
  • 4 zone(s) Ceramic Gas
  • Control type: Rotary Electronic ignition

Related manuals