Electrical connection. Miele KM 3010 G

Add to My manuals
48 Pages


Electrical connection. Miele KM 3010 G | Manualzz



Electrical connection


During installation, maintenance and repair work, the appliance must be disconnected from the electricity supply. It is only completely isolated from the electricity supply if the plug fuses have been fully unscrewed

(where applicable), the main circuit breaker has been tripped or the power cable has been unplugged from the wall outlet.

Do not cut off the plug on the power cord. If the plug does not fit in the outlet, have an electrician install an appropriate outlet.

The socket must be easily accessible after the appliance has been installed.

Work by unqualified persons can cause considerable danger to users.

Miele cannot be held liable for any damage arising as a result of such work.

Installation, repair and maintenance work should only be performed by a

Miele authorized service technician.

To avoid damaging the appliance, the information (voltage and frequency) on the data plate must correspond to the building's power supply.

Compare these informations before connecting the appliance. When in doubt, consult a qualified electrician.

The plug must be inserted into a suitable outlet that has been installed and grounded in compliance with all applicable local regulations.

To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

Installation, repair and maintenance work should only be performed by a

Miele-authorized qualified electrician in compliance with local regulations and the ANSI National Electrical

Code / NFPA 70 in the United States or the Canadian Electric Code, CSA

C22.1-02. in Canada.



Power cord and plug

The appliance is equipped with a flexible power cord and a 3-prong grounding plug for your protection against shock hazard. The plug must be inserted into a properly grounded outlet.

 Do not cut or remove the grounding prong from this plug.

Total output

See data plate

Connection data

The connection data is given on the data plate. Please ensure these match the household electrical supply.


 Please leave these instructions with the customer.




This service is available in USA only.

MieleCare , our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership.

MieleCare is the only Extended Service

Contract in the industry that guarantees repairs by a Miele Authorized Service

Provider using genuine Miele parts.

Only genuine Miele parts installed by factory trained professionals can guarantee the safety, reliability, and longevity of your Miele appliance.

Please note that unless expressly approved in writing by Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by

Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.

To learn more about MieleCare Extended Service Contracts, please contact your appliance dealer or visit us online at: www.mieleusa.com


Please have the model and serial number of your appliance available when contacting Customer Service.


Miele, Inc.

National Headquarters

9 Independence Way

Princeton, NJ 08540

Customer Service & Support

Phone: 888-99-MIELE(64353) [email protected]


International Headquarters

Miele & Cie. KG

Carl-Miele-Straße 29

33332 Gütersloh




Miele Limited

Headquarters and Miele Centre

161 Four Valley Drive

Vaughan, ON L4K 4V8 www.miele.ca

Customer Care Centre

Phone: 800-565-6435

905-532-2272 [email protected]

KM 3010 en-US M.-Nr. 09 317 500 / 04


Key Features

  • Black 62.6 cm Built-in
  • 4 zone(s) Ceramic Gas
  • Control type: Rotary Electronic ignition

Related manuals