the temperature display. Miele KWT 6321 UG

Add to my manuals
60 Pages


the temperature display. Miele KWT 6321 UG | Manualzz

Selecting further settings

To change the brightness of the temperature display

The default brightness for the wine unit temperature display is set to  .

To change the brightness of the temperature display (the temperature displays will change together):

 Touch the DynaCool On/Off sensor again.  will light up in the display.

 By pressing the sensors for setting the temperature, you can now set the display brightness. You can choose between levels  to  :

 : Minimum brightness,

 : Maximum brightness.

 Touch and keep your finger on the

DynaCool On/Off sensor for approx. 5 seconds.

The sensor's indicator light flashes and a  flashes in the temperature display for the lower wine conditioning zone

(display on the right).

 To save the setting, touch the

DynaCool On/Off sensor.

 Press one of the temperature setting sensors as often as necessary until  is displayed.

 To exit settings mode, touch the On/

Off sensor for the whole wine unit.

Otherwise the appliance will automatically switch to normal operation after approximately two minutes.



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 34 bottle(s) Grey
  • Number of shelves: 4 Number of doors: 1
  • 38 dB
  • 142 kWh
  • Built-in display Interior light

Related manuals