Contact in the event of a fault. Miele KWT 6321 UG


Add to my manuals
60 Pages

advertisement

Contact in the event of a fault. Miele KWT 6321 UG | Manualzz

After sales service and warranty

Contact in the event of a fault

In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer

Service Department.

You can book a Miele Customer Service Department call-out online at www.miele.com/service.

Contact information for the Miele Customer Service Department can be found at the end of this document.

Please quote the model identifier and serial number of your appliance (Fabr./

SN/Nr.) when contacting the Miele Customer Service Department. This information can be found on the data plate.

Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.

The data plate is located inside the wine unit.

XXXXXX

SN-ST

Nr. XX/ XXXXXXXXX.

XXX l

R600a: XXg

Warranty

The appliance warranty is valid for 2 years from date of purchase. In the UK, you must activate your cover by calling

0330 160 6640 or registering online at www.miele.co.uk.

For more information on country-specific warranty terms and conditions, please contact Miele Customer Service.

EPREL database

From 1 March 2021, information on energy labelling and ecodesign requirements will be available in the European

Product Database (EPREL). You can find the product database at the following link https://eprel.ec.europa.eu/. You will be asked to enter the model identifier.

The model identifier can be found on the data plate.

43

*INSTALLATION*

Electrical connection

The wine conditioning unit is supplied with a mains cable with moulded plug ready for connection to an earthed socket.

The socket must be easily accessible after the wine conditioning unit has been installed. If the socket is not easily accessible, ensure that a suitable means of disconnection is provided on the installation side for each pole.

 Risk of fire from overheating.

Connecting the refrigeration appliance to a multi-socket plug adapter or to an extension lead can overload the cable.

For safety reasons, do not use an extension lead or multi-socket adapter.

The electrical system must comply with local and national safety regulations

(BS 7671 in the UK).

For safety reasons, we recommend using a type   residual current device

(RCD) in the assigned electrical installation for connecting the wine conditioning unit.

If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available from the Miele

Customer Service Department). For safety reasons, such replacement may only be carried out by a qualified specialist or the Miele Customer Service

Department.

These operating instructions and the data plate indicate the nominal power consumption and the appropriate fuse rating. Compare this information with the data of the on-site electrical connection.

If in any doubt, consult a qualified electrician.

Do not connect the wine conditioning unit to a stand-alone inverter such as those used with an autonomous power supply, e.g. solar power. When the wine conditioning unit is switched on, power surges could result in an auto switchoff. This could damage the electronic module.

44

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 34 bottle(s) Grey
  • Number of shelves: 4 Number of doors: 1
  • 38 dB
  • 142 kWh
  • Built-in display Interior light

Related manuals

advertisement