Parts Required. Monogram ZIFS240NSS, ZIFI240HII, Fresh-Food Refrigerator, ZIBS240NSS, ZIBI240HII

Add to My manuals
16 Pages

advertisement

Parts Required. Monogram ZIFS240NSS, ZIFI240HII, Fresh-Food Refrigerator, ZIBS240NSS, ZIBI240HII | Manualzz

4

Installation Instructions

CONTENTS

Important Information .................................................2

Parts Required ..............................................................4

Tools/Hardware Required ............................................4

Staining Wood Panel Fronts ........................................4

Caring for Your Stainless Steel .....................................4

Product Location ...........................................................4

Install Water Line .........................................................5

Design Guide (ZIFI240, ZIFS240, ZIBI240, ZIBS240)

The Installation Space ...................................................6

Dual Product Installations ............................................7

For Stainless Steel Models ZIFS240, ZIBS240 ............8

Flush Inset and Standard Installation ............................8

Product Clearances .......................................................8

For Custom Models ZIFI240, ZIBI240 ...........................9

Standard Installation ......................................................9

Product Clearances .......................................................9

Installation Instructions

Step 1, Remove Packaging and Installation Parts ......10

Step 2, Reversing the Door .........................................10

Step 3, Install Custom 3/4” Door Panel and Handle .....13

Step 4, Level ...............................................................14

Step 5, Connect Water Supply ...................................14

Step 6, Connect Power ...............................................15

Step 7, Slide Product into Cutout ................................15

Step 8, Set Temperature Controls ..............................15

ZIFI240 AND ZIBI240 MODELS ONLY

PARTS REQUIRED

• Custom handle

• Assembled overlay panel

• Screws

PARTS SUPPLIED

• Handle side trim

• Optional black or stainless steel toekick

WARNING

CUT HAZARD

Cabinet edges along stamp/cut-out areas may be sharp.

Avoid placing hands, fingers, or other appendages near these areas. Failure to do so can result in cuts.

AVERTISSEMENT

Risque de coupure

Les bords de la caisse et les zones comportant un code d’identication ou des découpes peuvent être tranchants.

Garder les mains, les doigts ou autres appendices éloignés de ces zones. Le non-respect de cette instruction peut causer des coupures.

STAINING WOOD PANEL FRONTS

The drawer fronts are unfinished cherry wood. During use, oil from hands may accumulate and stain the wood.

• The drawer fronts may be stained and sealed to match adjacent cabinetry.

• Apply the stain and sealer according to the manufacturer’s instructions. To avoid unpleasant odor, keep the door open to ventilate and allow the stain/ sealer to dry completely before using the product.

CARING FOR YOUR STAINLESS

STEEL

• Before installation or first use, we strongly advise that you polish the stainless steel exterior and handle with a commercially available stainless steel cleaner such as Stainless Steel Magic.™ To preserve and protect the fine finish, we also strongly advise that you apply stainless steel cleaner monthly.

TOOLS/HARDWARE REQUIRED

• Adjustable wrench

• Carpenter’s glue (ZIFI240 and ZIBI240 models only)

• Screwdriver (ZIFI240 and ZIBI240 models only)

REFRIGERATOR LOCATION

Ŷ Do not install the refrigeratoe/freezer where the temperature will go below 55°F (13°C). It will not run often enough to maintain proper temperatures.

Ŷ Do not install the refrigeratoe/freezer where temperatures will go above 100°F (37°C). It will not perform properly.

Ŷ Do not install the refrigeratoe/freezer in a location exposed to water (rain, etc.) or direct sunlight.

Ŷ Install it on a floor strong enough to support it fully loaded.

31-1000642

advertisement

Related manuals