Step 1, Remove Packaging and Installation Parts. Monogram ZIFS240NSS, ZIFI240HII, Fresh-Food Refrigerator, ZIBS240NSS, ZIBI240HII

Add to My manuals
16 Pages

advertisement

Step 1, Remove Packaging and Installation Parts. Monogram ZIFS240NSS, ZIFI240HII, Fresh-Food Refrigerator, ZIBS240NSS, ZIBI240HII | Manualzz

• Remove the top trim cover and discard.

10

Installation Instructions

STEP 1 REMOVE PACKAGING

AND INSTALLATION PARTS

• Remove corner blocks and foam drawer stops.

• Remove all packing material, tape and protective plastic coverings.

• Remove the toekick attached to the back of the unit.

• Remove the custom panel attached to the front of the unit.

WARNING

Small objects are a choke hazard for children. Remove and discard any parts not used.

AVERTISSEMENT

Les petits objects peuvent

étrangler les enfants. Il faut jeter toutes les pièces qui ne sont pas utilisées.

STEP 2 REVERSING THE DOOR

(Cont.) (ZIFI240 model only)

• Remove 4 screws to remove the top door trim (do

NOT discard).

• Remove the top hinge pin

(do NOT discard).

• Flip the door 180 degrees.

• Remove 3 screws to remove the bottom door trim (do

NOT discard)

STEP 2 REVERSING THE DOOR

(ZIFI240 model only)

WARNING

Follow all steps when reversing the door swing. Failure to follow these instructions, leaving off parts, or over tightening screws, can lead to the door falling off and result in injury and property damage.

AVERTISSEMENT

S uivez toutes les étapes pour inverser le sens d’ouverture de porte. L’omission de suivre ces instructions, de ne pas utiliser toutes les pièces, ou le serrage excessif des vis, peuvent causer la chute de la porte et occasionner des blessures ou des dommages à la propriété.

• Remove top hinge and discard. Hold the door in place.

• Remove the black screw-hole cover from top left of cabinet and insert in top right.

• Remove 2 screws to remove the door stop and discard door stop.

• Remove 1 screw to remove the bottom hinge pin and discard hinge pin.

NOTE: Make sure the door is upside down so what was the bottom is now the top.

• Insert the top hinge pin.

• Install top door trim onto the new top side of the door.

• Install the new top trim cover that snaps into place.

• Flip the door 180 degrees.

31-1000642

Installation Instructions

STEP 2 REVERSING THE DOOR

(Cont.) (ZIFI240 model only)

• Install the new left bottom hinge pin and new door stop that are enclosed in the hardware bag.

• Install the bottom trim onto the new bottom side of the door.

STEP 2 REVERSING THE DOOR

(Cont.) (ZIFS240 model only)

WARNING

Follow all steps when reversing the door swing. Failure to follow these instructions, leaving off parts, or over tightening screws, can lead to the door falling off and result in injury and property damage.

AVERTISSEMENT

S uivez toutes les étapes pour inverser le sens d’ouverture de porte. L’omission de suivre ces instructions, de ne pas utiliser toutes les pièces, ou le serrage excessif des vis, peuvent causer la chute de la porte et occasionner des blessures ou des dommages à la propriété.

• Remove top hinge and discard. Hold the door in place.

• Remove the black screw-hole cover from top left of cabinet and insert in top right.

• Remove 2 screws to remove the toe kick (do NOT discard).

• Remove 4 screws to remove the bottom right hinge (discard the hinge).

• Install bottom left hinge that is enclosed in hardware bag with existing screws.

• Remove 2 screws tor remove the toekick (do not discard).

• Remove the plastic cap from the top left corner of the toe kick and discard.

• Attach the new plastic cap that is enclosed in the hardware bag to the top right corner of the toe kick.

• Reinstall toe kick to unit with 2 existing screws.

• To install the door, set the door onto the left bottom hinge pin.

Holding the door in place, insert the new top left hinge pin into the door and secure the hinge to the case with screws.

• Remove bottom right hinge and discard the hinge.

Keep the screw for installation of the new hinge.

• Attache the bottom left hinge with the screw from the previous step.

11

31-1000642

Installation Instructions

STEP 2 REVERSING THE DOOR

(Cont.) (ZIFS240 model only)

• Move the plug on the toekick from the left to the right and reattach toekick to the unit.

STEP 2 REVERSING THE DOOR

(Cont.) (ZIFS240 model only)

• Insert the new top plug/bushing in the new top of the door.

• Remove top plug/bushing from the door using a flat head screwdriver. Discard the bushing.

• Rotate the door 180°.

• Re-insert the black screw post in the new bottom of the door.

• Rotate the door 180°.

• Remove the screw from the plug/bushing on the bottom of the door. Discard the plug/bushing but keep the screw.

• Insert the new bottom plug/bushing in the new bottom of the door. Secure with the screw removed from the old plug/bushing.

• Remove the black screw post from the bottom of the door using a flat head screwdriver. Keep the screw post.

• To install the door, set the door onto the left bottom hinge pin. Holding the door in place, insert the new top left hinge pin into the door and secure the hinge to the case with screws.

NOTE: The top will now be the bottom of the door and the bottom is now the top.

12

31-1000642

advertisement

Related manuals