1 Introduction
This application note describes method to connect EXIWAY POWER CONTROL (EXW-P-C) to StruxureWare
Building Operation (SBO) solution with a spaceLYnk (SL).
A glossary is available in the appendix chapter 10 of this document. Please refer to it whenever necessary.
Added value of this application note
The customer value proposition corresponds to a real use case, connect a EXW-P-C (Exiway Power Control) and a SBO solution.
EXW-P-C manages emergency lighting in a building. All information of the installation are transmitted by spaceLYnk to SBO. spaceLYnk is used like a gateway, it converts information received from EXW-P-C for SBO solution.
Competencies
This document is intended for readers who have been trained on spaceLYnk, EXW-P-C and SBO products.
The integration should not be attempted by someone who is new to the installation of each product. In addition we recommend that you be familiar with:
The concepts of KNX technology
Basic technical knowledge of BACnet, Modbus TCP/IP & RTU, LUA scripting
Basic technical knowledge of EXW-P-C product
Basic technical knowledge of SBO product
AN019_v1-1_EXW-P-C_connected_to SBO_via spaceLYnk
Page 6 / 32
System prerequisites
Before you begin, ensure you have the proper software. You can download the latest versions here:
Software Version Download spaceLYnk
Building Operation Workstation
Entreprise/Automation Server
Exiway Power Control
EXW_P_C Modbus license
Firefox
1.1 and newer
1.4.0 and newer
Latest version
Latest version http://www.schneider-electric.com
http://www.schneider-electric.com
33.0 and newer http://www.mozilla.org
Table 1: System prerequisites http://buildings.schneider-electric.com
http://buildings.schneider-electric.com
AN019_v1-1_EXW-P-C_connected_to SBO_via spaceLYnk
Page 7 / 32