Troubleshooting. Ryobi RY40270-PRN

Add to My manuals
97 Pages

advertisement

 Troubleshooting. Ryobi RY40270-PRN | Manualzz

MAINTENANCE

ATTACHING THE STORAGE HANGER

See Figure 12.

There are two ways to hang the attachment for storage.

 To use the hanger cap, push in the button and place the hanger cap over the end of the attachment shaft. Slightly rotate the cap from side to side until the button locks into place.

 The secondary hole in the attachment shaft can be used for hanging purposes as well.

STORING THE ATTACHMENT

 Store the attachment in a well-ventilated place that is inaccessible to children.

 Keep away from corrosive agents such as garden chemicals and deicing salts.

REPLACEMENT PARTS

0.080 in. Twisted Replacement Line (Bulk)............AC04138

0.080 in. Twisted Replacement Line (Pre-cut) .......AC04139

Available at homedepot.com

TROUBLESHOOTING

PROBLEM

Line will not advance

Grass wraps around boom housing and string head

POSSIBLE CAUSE

Line is welded to itself.

Not enough line on spool.

Line is worn too short.

Line is tangled on spool.

Cutting tall grass at ground level.

SOLUTION

Lubricate with silicone spray.

Install more line. Refer to Line Replacement earlier in this manual.

Pull lines while alternately pressing down on and releasing bump knob.

Remove line from spool and rewind. Refer to Line Replacement earlier in this manual.

Cut tall grass from the top down to prevent wrapping.

CALL US FIRST

For any questions about operating or maintaining your product, call the Ryobi Help Line!

Your product has been fully tested prior to shipment to ensure your complete satisfaction.

9 — English

advertisement

Related manuals