Using a web browser to configure the transmitter
November 2022
Figure C-1: Transmitter home page
Configuration and Use Manual
00809-0100-1600
C.4 Log in with a web browser using an unsecure connection
Prerequisites
To log in to the transmitter with a web browser:
• The PC and transmitter must have been properly configured for their connection type.
• You must know the IP address of the transmitter.
Procedure
1. Enter the IP address of the transmitter in the web browser address bar.
When the transmitter is found, the login page appears.
2. Enter the login credentials.
Two users are predefined. You can change the passwords, but you cannot add or delete users.
Table C-3: Login credentials
Username
Admin
Description
Complete access:
• Can perform operator functions, such as meter verification, zero verification, starting/stopping batches, starting/stopping totals, and resetting totals
• Can view and make changes to transmitter configuration
234 Micro Motion 1600 with Ethernet Transmitters
