Pump Installation. Graco 17C721, 334599M, ProConnect Endurance Displacement Pump, Repair
Add to My manuals24 Pages
advertisement
▼
Scroll to page 2
of
24
Pump Installation
Pump Installation
Pump installation includes securing the pump and connecting to the fluid inlet and outlet.
1. Connect outlet hose to pump.
4. Close pump rod cover. Make certain that it is flush against drive housing.
ti24086a
2. Move pump displacement rod up or down until it slides into the connecting rod when the pump is slid into the drive housing.
ti24087a
5. Use both hands to tighten pump retain ing nut.
ti24085b
3. Slide pump all the way into drive hous ing. ti24088a
6. Use a hammer to turn pump retaining nut an additional 1/8 to 1/6th turn or
45° to 60°.
1/8 - 1/6 ti25139a
7. Install suction hose.
ti24089a ti24090a
334599M 17
advertisement
Key Features
- Genuine Graco replacement parts for guaranteed compatibility
- Easy-to-follow instructions for a hassle-free repair process
- Includes all necessary components for a thorough pump overhaul
- Restores pump to its original performance and efficiency
- Extends the lifespan of your ProConnect Endurance Displacement Pump
Related manuals
Frequently Answers and Questions
What models of ProConnect Endurance Displacement Pumps are compatible with this repair kit?
This repair kit is compatible with ProConnect Endurance Displacement Pump models 17C487, 17C488, 17C489, 17C721, 17M992, 24Z731, 19Y298, 19B732, and 19D873.
Can I use non-Graco replacement parts with this repair kit?
No, it is recommended to only use genuine Graco replacement parts with this repair kit to ensure compatibility and maintain the integrity of your pump.
How difficult is it to perform the repair using this kit?
The repair process is designed to be easy to follow, with clear instructions provided in the manual. However, if you encounter any difficulties, it is recommended to consult a qualified technician.