Installing the device. Schneider Electric Wiser Smart Plug 16 A 24 Pages
Installing the device. Schneider Electric Wiser Smart Plug 16 A
Schneider Electric Wiser Smart Plug 16 A lets you control your home appliances and monitor energy consumption right from your smartphone. You can switch devices on and off remotely, set schedules, create moments and automations, and check power consumption history. It's easy to set up – just plug it in, download the Wiser app, and follow the simple pairing instructions.
advertisement
6
Direct operation : The plug can always be controlled directly on-site. To do this, you can switch the plug On and Off with the operation button.
Functions
• Switching On and Off plugged-in devices manually and remotely via app.
• Setting a timer or a time schedule (via app)
• Visibility of load status (via app)
• Monitoring and visualization of energy consumption (via app)
Operating elements
1. A: Socket for protective earthing and standardized European plugs
2. B: Status LED
3. C: Operation button
4. D: Plug fitting to a European protective earthing socket outlet
A
B
C
D
Installing the device
Refer to the installation instruction supplied with this product.
See Wiser Smart Plug .
Pairing the device
Using the Wiser app, first pair your device with the Gateway to access and control the device. You can either add the device manually or do an auto-scan to pair it.
NOTE: The Plug shows a non-zero power consumption value when the device is added to the app if the Plug was in ON state with a load connected before pairing it to the Gateway .
Pairing device manually
To pair the device manually:
1. On Home page, tap + .
2. Tap and select the required Wiser Hub on the slide-up menu.
DUG_Wiser Smart Plug_WSE_01
3. Select an option to add the device (A):
– Add Device with Install Code
– Add Device without Install Code
Add Device
Install Code is Recommended device.
If you are unable to scan or type the install code, you can still add the device without it.
Add Device without Install Code
A
TIP: It is highly recommended to add the device with install code.
4. To pair the device with install code, tap Add Device with Install Code to display the slide-up menu. Select any one of the options (B):
– Scan Install Code - you can scan the device for the install code
– Enter Install Code Manually - you can manually enter the install code from the device
After pairing the device with install code, proceed to Step 6 .
DUG_Wiser Smart Plug_WSE_01
B
Cancel
5. To pair the device without install code, tap Add Device without Install Code .
6. Short press the operation button 3 times (< 0,5 s).
3× < 0,5 s
↓
The LED blinks orange.
7
advertisement