Creating a schedule. Schneider Electric Wiser Smart Plug 16 A

Wiser Smart Plug 16 A

2. Alternatively, you can navigate to the

control panel, page 11

of the device and tap to switch on/off the Plug.

NOTE: The control panel shows the current state of the Plug.

Creating a schedule

The Plug can be controlled and triggered by a schedule. Once the schedule is set, your system will follow the active schedule. You can create or modify the schedules at any time.

To create a schedule:

1. On the Home page, tap All devices > Smart Plug .

2. Tap Schedule > Add schedule to add a schedule.

3. Set the time (A).

4. Tap Repeat (B) to select the days you want to set the schedule.

5. Tap Note (C), enter the note and tap Confirm .

6. Tap the toggle switch (D) to turn On the Notification for the schedule. The app will send a notification that the scheduled task is executed at the time of schedule.

7. Tap Smart Plug (E) and select one of the options:

– On - Turns On the Plug on the scheduled time

– Off - Turns Off the Plug on the scheduled time

Add Schedule Save

19 20

20 21

21 22

A

B

C

Note

Once

E

Smart Plug On

Note - The Schedule works according to the timezone where device is located.

D

8. Tap Save .

Checking the power consumption

Using the Wiser app, you can monitor the power consumption of the load connected to the device by accessing the consumption feature.

TIP: You can see the daily real-time power consumption value of the load connected to the device on the

control panel, page 11

of the device.

To see the history of device power:

1. On the Home page, tap All devices > Smart Plug .

2. On the device control panel page, tap Consumption .

DUG_Wiser Smart Plug_WSE_01 13