LED Indications. Schneider Electric Wiser Smart Plug 16 A 24 Pages
LED Indications. Schneider Electric Wiser Smart Plug 16 A
Schneider Electric Wiser Smart Plug 16 A lets you control your home appliances and monitor energy consumption right from your smartphone. You can switch devices on and off remotely, set schedules, create moments and automations, and check power consumption history. It's easy to set up – just plug it in, download the Wiser app, and follow the simple pairing instructions.
advertisement
LED Indications
Pairing
User Action
Press the operation button 3 times
LED Indication
LED blinks orange, once per second.
Status
Pairing mode is active for 30 seconds.
When pairing is completed, LED glows green for some time before turning Off.
Resetting
User Action
Press the operation button 3 times and hold it down once for > 10 s.
LED Indication
After 10 s, the LED starts blinking red.
Status
The device is in reset mode. It is reset to the factory settings after 10 seconds. The device then restarts and the LED starts blinks green before turning Off.
Technical Data
Nominal voltage
Nominal power
AC 230 V, 50 Hz
Load type
LED
Load value
100 W
300 W
500 W
3680 W
3680 W
Nominal current
Standby
Operating temperature
Neutral conductor
Fuse protection
IP rating
Operating frequency
Max. radio-frequency power transmitted
Product dimensions
(H X W X D)
Communication protocol
DUG_Wiser Smart Plug_WSE_01
16 A
Maximum 0.5 W
0 °C to 35 °C
Required
16 A circuit breaker
IP20
2405 - 2480 MHz
8.2 dBm
60 X 60 X 65 mm
Zigbee 3.0 certified
21
advertisement