8
Automatic Icemaker
(on some models)
Not all features are on all models.
WARNING
Connect to potable water supply only.
A cold water supply is required for automatic icemaker operation. The water pressure must be between 40 and
120 psi (275-827 kilopascals).
CAUTION
Avoid contact with the moving parts of the ejector mechanism, or with the heating element
(located on the bottom of the ice maker) that releases
WKHFXEHV'RQRWSODFHILQJHUVRUKDQGVRQWKH automatic ice making mechanism while the refrigerator is plugged in.
A newly-installed refrigerator may take 12–24 hours to begin making ice.
The ice maker will produce approximately 70-100
FXEHVLQDKRXUSHULRGGHSHQGLQJRQWKHIUHH]HU compartment temperature, room temperature, number of door openings and other use conditions.
,IWKHUHIULJHUDWRULVRSHUDWHGEHIRUHWKHZDWHUFRQQHFWLRQ is made to the ice maker, set the switch OFF.
When the refrigerator has been connected to the water supply, set the switch ON position.
The ice maker will fill with water when it cools to 15°F
(-9°C). A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes.
Once the ice maker starts to make ice, it may take up to 48 hours to fill the bin, depending on the temperature settings and number of door openings.
<RXZLOOKHDUDEX]]LQJVRXQGHDFKWLPHWKHLFHPDNHU fills with water.
NOTICE: Throw away the first few batches of ice to allow the water line to clear.
Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the ice maker will stop producing ice.
,WLVQRUPDOIRUVHYHUDOFXEHVWREHMRLQHGWRJHWKHU
,ILFHLVQRWXVHGIUHTXHQWO\ROGLFHFXEHVZLOOEHFRPH cloudy, taste stale, shrink or fuse together.
,FHPDNHUDFFHVVRU\NLW
,I\RXUUHIULJHUDWRUGLGQRWDOUHDG\FRPHHTXLSSHGZLWK an automatic ice maker, an ice maker accessory kit is available at extra cost.
This refrigerator will accept accessory icemaker kit
,0'RU,0'8VHLQVWUXFWLRQV;VXSSOLHGLQWKHNLWIRU assembly.
,FHPDNHU/DEHO
Power Switch
Feeler Arm
,FHPDNHU
IMPORTANT: This refrigerator requires a red label icemaker. See above for the location of the label on the
LFHPDNHU,IWKHLFHPDNHUWKDWFDPHZLWK\RXUNLWGRHV
QRWKDYHDUHGODEHOLWZLOOQRWIXQFWLRQ,QWKLVFDVH please call 800.GE.CARES (in Canada 800.561.3344) for the correct icemaker.
49-1000478 Rev. 5
Care And Cleaning
Cleaning the Outside
FINGERPRINT RESISTANT STAINLESS STEEL*, BLACK STAINLESS, SLATE, DARK
SLATE, PAINTED - Outside surfaces, door handles, and trim
DO NOT use Stainless Steel cleaners on the door surfaces.
IMPORTANT: The use of incorrect products may damage the outer finish of Fingerprint Resistant Stainless models.
Please follow these instructions and use only the appropriate items below to clean your appliance surfaces.
DO USE
On all models:
Soft, clean cloth or sponge
On fingerprint resistant* and painted models:
Mild detergent mixed with warm water
DO NOT USE
Abrasive cloths, scrubbing sponges, scouring or steel wool pads
Abrasive powders, liquids, or sprays
Window sprays, ammonia, or bleach
Citrus or plant oil based cleaners
Acidic or vinegar based cleaners
Oven cleaners
Alkaline cleaners
Stainless steel cleaners
On stainless steel models:
Mild detergent mixed with warm water
$SSURYHGVWDLQOHVVVWHHOFOHDQHUV
Visit the GE Appliances parts store for approved stainless steel cleaners:
GEAppliancesparts.com or call
877.959.8688
Cleaners with oxalic acid such as Bar
.HHSHUV)ULHQG6RIW&OHDQVHUFDQ be used to remove surface rust, tarnish and small blemishes on stainless steel surfaces only.
Abrasive powders or sprays
Window Sprays or Ammonia
Citrus or plant oil-based cleaners
Acidic or vinegar-based cleaners
Oven cleaners
Cleaners containing acetone (propanone)
$Q\FOHDQHUZLWK:$51,1*DERXWSODVWLFFRQWDFW
*Easily wipe away smudges and fingerprints.
NOTE: DO NOT allow stainless steel cleaner to come in contact with any plastic parts such as trim pieces, handle hardware and
OLQHUV,IXQLQWHQWLRQDOFRQWDFWRIFOHDQHUVZLWKSODVWLFSDUWVGRHVRFFXUFOHDQSODVWLFSDUWZLWKDVSRQJHDQGPLOGGHWHUJHQWPL[HG with warm water.
Cleaning the Inside
To help prevent odors, leave an open box of baking soda in the
IUHVKIRRGDQGIUHH]HUFRPSDUWPHQWV
8QSOXJWKHUHIULJHUDWRUEHIRUHFOHDQLQJ,IWKLVLVQRWSUDFWLFDO wring excess moisture out of sponge or cloth when cleaning
When pushing the refrigerator back, make sure you don’t roll over the power cord or ice maker supply line (on some models).
After rolling the refrigerator back into place, turn the legs clockwise until the legs again bear the weight of the refrigerator.
Replacing the Lights
around switches, lights or controls.
8VHZDUPZDWHUDQGEDNLQJVRGDVROXWLRQ²DERXWDWDEOHVSRRQ
(15 ml) of baking soda to a quart (1 liter) of water. This both
FOHDQVDQGQHXWUDOL]HVRGRUV5LQVHDQGZLSHGU\
/('OLJKWLQJLVORFDWHGDWWKHWRSFHQWHURIWKHIUHVKIRRG compartment.
$QDXWKRUL]HGWHFKQLFLDQZLOOQHHGWRUHSODFHWKH/('OLJKW
After cleaning the door gaskets, apply a thin layer of petroleum jelly to the door gaskets at the hinge side. This helps keep the gaskets from sticking and bending out of shape.
,IWKLVDVVHPEO\QHHGVWREHUHSODFHGFDOO*($SSOLDQFHV
6HUYLFHDWLQWKH8QLWHG6WDWHVRU
1.800.561.3344 in Canada.
CAUTION
'RQRWFOHDQJODVVVKHOYHVRUFRYHUVZLWK warm water when they are cold. Glass shelves and covers may break if exposed to sudden temperature changes or impact such as bumping or dropping. Tempered glass is designed to
VKDWWHULQWRPDQ\VPDOOSLHFHVLILWEUHDNV'RQRWZDVKDQ\ plastic refrigerator parts in the dishwasher.
Moving the Refrigerator
Be careful when moving the refrigerator away from the wall.
All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces.
Turn the leveling legs at each front corner of the refrigerator counterclockwise until the rollers support the refrigerator. Pull the refrigerator straight out and return it to position by pushing it straight in. Moving the refrigerator in a side direction may result in damage to the floor covering or refrigerator.
Preparing for Vacation
For long vacations or absences, remove food and unplug the refrigerator. Move the temperature control dial to the OFF position, and clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the doors open.
Move the switch to the OFF position on the power switch model, and shut off the water supply to the refrigerator.
,IWKHWHPSHUDWXUHFDQGURSEHORZIUHH]LQJKDYHDTXDOLILHG servicer drain the water supply system (on some models) to prevent serious property damage due to flooding.
Preparing to Move
Secure all loose items such as grille, shelves and drawers by taping them securely in place to prevent damage. To prevent the doors from opening while moving, secure them to the case with tape. Be sure the refrigerator stays in an upright position during moving.
49-1000478 Rev. 5
9
Installation Instructions
Models 16, 17, 18, 19, & 22
If you have questions, call 1.800.GE.CARES or visit our website at: GEAppliances.com.
In Canada, call 1.800.561.3344 or visit our website at: geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT –
Save these instructions for local inspector’s use.
•
IMPORTANT –
Observe all governing codes and ordinances.
Note to Installer –
Be sure to leave these instructions with the Consumer.
Note to Consumer –
.HHS WKHVH LQVWUXFWLRQV for future reference.
• ± ,QVWDOODWLRQ RI WKLV DSSOLDQFH UHTXLUHV basic mechanical skills.
• ± 5HIULJHUDWRU ,QVWDOODWLRQ
15 minutes
5HYHUVLQJ WKH 'RRU 6ZLQJ
15 minutes
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered under the Warranty.
10
WATER SUPPLY TO THE ICE
MAKER (on some models)
,I WKH UHIULJHUDWRU KDV DQ LFH PDNHU LW ZLOO KDYH WR be connected to a cold water line. A water supply kit (containing copper tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer, by visiting our Website at GEAppliances.
com (in Canada at geappliances.ca
) or from Parts and Accessories, 1.877.959.8688. See instructions
,QVWDOOLQJ WKH :DWHU /LQH
REFRIGERATOR LOCATION
• 'R QRW LQVWDOO WKH UHIULJHUDWRU ZKHUH WKH WHPSHUDWXUH will go below 55°F (12.7°C) because it will not run often enough to maintain proper temperatures.
0RGHOV ZLWK DGMXVWDEOH FRQWURO LQ WKH IUHH]HU compartment can be installed at temperatures at, but not below, 38°F (3.3°C).
• 'R QRW LQVWDOO WKH UHIULJHUDWRU ZKHUH WKH temperature will go above 110°F (43.3°C) because it will not perform properly.
• 'R QRW LQVWDOO WKH UHIULJHUDWRU LQ D ORFDWLRQ H[SRVHG to water (rain, etc.) or direct sunlight.
,QVWDOO LW RQ D IORRU VWURQJ HQRXJK WR VXSSRUW LW IXOO\ loaded.
CLEARANCES
Allow the following clearances for ease of installation, proper air circulation and plumbing and electrical connections.
6LGHV ´ PP
7RS ´ PP
%DFN ´ PP RQ FXIW PRGHOV
• Back 1" (25 mm) on 16 & 17 cuft models
ROLLERS AND LEVELING LEGS
Leveling legs near each front corner of the refrigerator are adjustable. They firmly position the refrigerator and prevent it from moving when the doors are opened. Leveling legs should be set so the front of the refrigerator is raised just enough that the doors close easily when opened about halfway.
Turn the leveling legs clockwise to raise the refrigerator, counterclockwise to lower it.
Rollers next to the leveling legs allow you to move the refrigerator away from the wall for cleaning.
Turn the legs counterclockwise until the weight of the refrigerator is transferred from them to the rollers.
After rolling the refrigerator back into place, turn the legs clockwise until the legs again bear the weight of the refrigerator.
49-1000478 Rev. 5
