CHAPTER -2: DESCRIPTION OF THE APPLIANCE. Sharp SJ-BF237M01X-EN

4

5

CHAPTER -2: DESCRIPTION OF THE APPLIANCE

3 A

15

14

13

6

7

8

9

12

2 1

A) Refrigerator compartment

B) Freezer compartment

B

11

1) Thermostat knob

2) Lamp cover

3) Turbo fan *

4) Wine rack *

5) Refrigerator shelves

6) Crisper cover

7) Crisper

8) Freezer upper flap / Drawer

9) Freezer drawers

10) Ice box tray

11) Freezer glass shelves*

12) Bottle shelf

13) Adapti-Lift door shelf * / door shelf

14) Door shelves

15) Egg holder

10

* In some models

This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model.

General notes:

Fresh Food Compartment (Fridge): Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance, and shelves evenly distributed, the position of the door bins does not affect energy consumption.

Freezer Compartment (Freezer): Most Efficient use of energy is ensured in the configuration with the drawers and

CHAPTER -3: USING THE APPLIANCE

Thermostat Setting

The thermostat automatically regulates the temperature inside the refrigerator and freezer compartments. Cooler temperatures can be obtained by rotating the knob to higher numbers, 1 to 5.

Thermostat Settings

• Set the knob to a low/medium position, up to 3, for short-term storage of food in the appliance.

• Set the knob to a medium position, 3 or 4, for long-term storage of food in the appliance.

• Set the knob to 5 position for freezing the fresh food. The appliance will run for colder temperatures.

Note that: The ambient temperature, the temperature of freshly stored food, and how often the door is opened all affect the temperature in the appliance. If required, change the temperature setting.

Lamp cover

Thermostat knob

EN -7-

CHAPTER -3: USING THE APPLIANCE

Temperature Settings Warnings

• The ambient temperature, temperature of the freshly stored food and how often the door is opened affects the temperature in the refrigerator compartment. If required, change the temperature setting.

• It is not recommended that you operate your fridge in environments colder than 10°C in terms of its efficiency.

• When setting the thermostat, take into consideration how often the appliance doors are opened and closed, how much food is stored in the refrigerator, and the environment in which the refrigerator is located.

• When the appliance is first switched on, allow it to run for 24 hours in order to reach operating temperature. During this time, do not open the door and do not keep a large quantity of food inside.

• Unplug your appliance during a power cut to prevent damage to the compressor. Once power is restored, delay plugging in your appliance for 5 to 10 minutes. This will help prevent damage to the appliance's components.

• Your appliance is designed to operate in the ambient temperature ranges stated in the standards, according to the climate class stated in the information label. It is not recommended that your fridge is operated in the environments which are outside of the stated temperature ranges. This will reduce the cooling efficiency of the appliance.

Climate class and meaning:

T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C.

ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to

38 °C.

N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to

SN (extended temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from

The Turbo Fan (if available)

Do not block the air inlet and outlet openings when storing food, otherwise air circulation provided by the turbo fan will be impaired.

Turbo fan

Accessories

Ice tray

• Fill the ice tray with water and place in the freezer compartment.

• After the water has completely turned into ice, you can twist the tray as shown below to get the ice cube.

The Bottle Holder (In some models)

Use the bottle holder to prevent bottles from slipping or falling over.

EN -8-