Contents. NEC MultiSync X551S

Contents

Your new MultiSync monitor box* should contain the following:

• Power

• Clamp x 3

1

• Video Signal Cable

• Wireless Remote Control and AA Batteries

• Screw with washer (M4 x 10) x 5

• Screw for Option board slot (M4 x 6) x 2

• CD-ROM

• Option board slot cover

• Wall Mount adapter x 4

• Wall Mount adapter screw x 4

• Thumbscrew for optional stand x 2

Video Signal Cable

(Mini D-SUB 15 pin to

Mini D-SUB 15 pin)

Power Cord* 1

Screw with washer

(M4 x 10) x 5

Screw for Option board slot

(M4 x 6) x 2

Wall mount adapter screw x 4

Thumbscrew for optional stand x 2

Clamp x 3

Setup Manual

CD-ROM

Wall mount adapter x 4

Setup Manual Wireless Remote Control and AA Batteries

Option board slot cover

* Remember to save your original box and packing material to transport or ship the monitor.

* 1 Type and number of power cords included will depend on the where the LCD monitor is to be shipped. When more than one power cord is included, please use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

English-4