Lubrication Equipment Buyer`s Guide

Add to my manuals
88 Pages

advertisement

Lubrication Equipment Buyer`s Guide | Manualzz

Hurricane

Dispense System

Features and Benefi ts

• Electric pump with 6 ft (1.8 m) grounded power cord

• Digital metering standard on all units

• Quick-change bung adapter

• Pumps synthetic- or petroleum-based oils, ATF and antifreeze

(up to 50/50 mix)

• Simple two button operation

• Fits any container up to 44 in (1.1 m) tall with a 2 in NPT opening

• Measures in quarts, gallons, pints or liters

• Available with 8 ft or 25 ft (2.4 m or 7.6 m) meter and hose or built-in tapper

• Variety of portable package options

Typical Fluids Handled

• Synthetic- and petroleum-based oils

• Automatic transmission fl uid

• Anti-freeze (50/50 mix)

Technical Specifi cations

Voltage

Maximum current

Flow rate

Maximum container height

Weight (varies by model)

Meter accuracy

Instruction manual

ETL listed in US and Canada

110 Volts / 60 Hz

6 Amps

1.50 gpm (6.0 lpm)

44 in (1.1 m)

Up to 20 lbs (9 kg)

± 1.5%

311216

234902 and 249294 Hurricane with meter & hose

Ordering Information

Hurricane Dispense Systems

248918 Hurricane metered tapper unit

234902

249294

Hurricane 8 ft (2.4 m) hose and meter

Hurricane 25 ft (7.6 m) hose and meter

Portable Packages with 25 Gallon Dispense Cart

249783

249771

249821

Hurricane metered tapper unit

Hurricane 8 ft (2.4 m) hose and meter

Hurricane 25 ft (7.6 m) hose and meter

Portable Packages for 16 Gallon (60 l) Barrels

253487 Hurricane caster base with metered tapper

253486

253494

Hurricane caster base with 8 ft (2.4 m) hose and meter

Hurricane caster base with 25 ft (7.6 m) hose and meter

Accessories

253683 Hurricane caster base

36

249771 and 249821 Portable package with

25 gallon dispense cart

253486 and 253494 Portable package

16 gallon barrel not included

234902 and 249294

Hurricane with meter & hose

L U B R I C A T I O N E Q U I P M E N T

T R A N S F E R P U M P S

248918

Hurricane tapper unit

www.graco.com

APEX

and APEX On-Demand

Electric Transfer Pumps

APEX Transfer Pumps

• Available with 12 VDC, 115 VAC and 230 VAC electric motors

• Self-priming, positive displacement design

• Pumps petroleum- and synthetic-based lubricants up to 8 gpm (30 lpm)

• Built-in bypass valve

• Transfer used oil with inlet suction screen ( 260306)

• TENV electric motor for demanding environments, models 260105, 260106, 260108 and 260109

• System includes suction tube, fl uid hose, dispense valve and bung adapter for models 260100, 260101, 260102 and 260104

APEX On-Demand Dispensing Pumps

• On-demand sensing system automatically starts and stops the pump

• Low operating and installation costs

• Available in 12 VDC and 115 VAC

• TENV electric motor for demanding environments

• Extremely quiet pump operation

• Output fl ow is continuous and non-pulsating

• Inlet and outlet check valves with thermal relief valves included

Typical Applications

• Filling bulk tanks from drums

• Agricultural equipment

• Lubricant transfer from remote locations

• Filling in-plant machinery

• Construction equipment

• Evacuating used oil receivers

• Automotive and truck service garages

• Fleet marine and personal boat service

Typical Fluids Handled

• Synthetic oil • Used oil* • Anti-freeze

• Petroleum oil* • Non-fl ammable oil based solvents

*Not for food grade use

• Hydraulic fl uids • Cutting oils

• Oil-based herbicide carriers

APEX 115 VAC oil transfer system

APEX On-Demand

12 volt DC dispensing pump

Performance Charts by Part Number

80

(5.5, 0.5)

70

(4.8, 0.4)

60

(4.1, 0.4)

50

(3.4, 0.3)

40

(2.7, 0.2)

30

(2.0, 0.2)

20

(1.3, 0.1)

10

(0.6, 0.06)

A

C

B

0

gpm

0 2 4 6 8 10

(lpm) (7.6) (15.1) (22.7) (30.2) (37.8)

FLOW RATE

PART NUMBERS

A

= 260101, 260104

B

= 260100

C

= 260102

LEGEND

Relief valve opens

180

(12, 1.2)

160

(11, 1.1)

140

(9.6, 0.9)

120

(8.2, 0.8)

100

(6.8, 0.6)

80

(5.5, 0.5)

60

(4.1, 0.4)

40

(2.7, 0.2)

20

(1.3, 0.1)

A

B

C

D

700

(48.2, 4.8)

600

(41.3, 4.1)

500

(34.4, 3.4)

400

(27.5, 2.7)

300

(20.6, 2.1)

200

(13.7, 1.3)

100

(6.8, 0.6)

0

gpm

0 1 2 3 4 5 6 7 8 9

(lpm) (3.8) (7.6) (11.4) (15.1) (19) (22.7) (26.4) (30.2) (34)

0

C

A

B

D

E

gpm

0 1 2 3 4 5

(lpm) (3.7) (7.6) (11.3) (15.1) (18.9)

FLOW RATE

FLOW RATE

PART NUMBERS

A

= 260105, 260106

B

= 260108

C

= 260240

D

= 260109

LEGEND

Relief valve setting at 150 psi

(10.3 bar, 1.0 MPa)

PART NUMBERS

A

= 260112

B

= 260110

C

= 260111

D

E

= 260114

= 260113

LEGEND:

Pressure switch opens

www.graco.com

L U B R I C A T I O N E Q U I P M E N T

T R A N S F E R P U M P S

37

APEX

and APEX On-Demand

Electric Transfer Pumps

APEX Transfer System

Part Number

Motor

Hertz

Horsepower

Maximum Current

Maximum Flow Rate

Maximum Pressure

Inlet Port

260100

12 VDC

NA

0.75

35 amps

5.8 gpm (22 lpm)

65 psi (4.5 bar)

1 npt(f)

260101

115 VAC

60 Hz

0.50

9.2 amps

4.25 gpm (16 lpm)

65 psi (4.5 bar)

1 npt(f)

Outlet Port

Weight

3/4 npt(f)

34 lbs (15 kg)

3/4 npt(f)

25 lbs (11 kg)

Instruction manual 311305 311305

Note: All oil transfer systems come with 3/4 in x 8 ft hose, 1 in x 34 in suction tube & 3/4 in outlet dispense valve

*Designed for fl uid viscosities of 1000 centistokes or less. If fl uid viscosity is greater than 1000 centistokes use part 260101.

APEX Transfer Pumps

Part Number

Motor

Hertz

Horsepower

Maximum Current

Maximum Flow Rate

Maximum Pressure

Inlet Port

Outlet Port

Weight

Instruction Manual

Note: All oil transfer pumps come with bung adapter.

*Part no. 260105 is a wall mount unit

APEX On-Demand Pumps

260105*

115 VAC

60 Hz

1.00

7.5 amps

3.0 gpm (11 lpm)

150 psi (10 bar)

1 npt

3/4 npt

25 lb (11 kg)

311306

260106

115 VAC

60 Hz

1.00

7.5 amps

3.0 gpm (11 lpm)

150 psi (10 bar)

1 npt

3/4 npt

25 lb (11 kg)

311306

Part Number

Voltage

Hertz

Horsepower

Maximum Current

Maximum Flow Rate

Maximum Pressure

Inlet Port

Outlet Port

260110

115 VAC

60 Hz

0.75

10 amps

2.3 gpm (9 lpm)

370 psi (25 bar)

3/4 npt

-12 JIC (m)

Weight 27 lb (12 kg)

Instruction Manual

Note: All on-demand pumps come with bung adapter

311307

260111

115 VAC

60 Hz

1.00

13 amps

3 gpm (11 lpm)

550 psi (38 bar)

3/4 npt

-12 JIC (m)

32 lb (15 kg)

311307

260113

115 VAC

60 Hz

1.50

18 amps

4.0 gpm (15 lpm)

470 psi (32 bar)

3/4 npt

-12 JIC (m)

41 lb (19 kg)

311307

260102*

115 VAC

0.75

9.0 amps

8.0 gpm (30 lpm)

30 psi (2.1 bar)

1 npt(f)

3/4 npt(f)

25 lbs (11 kg)

311305

260108

115 VAC

60 Hz

1.00

9.0 amps

4.0 gpm (15 lpm)

150 psi (10 bar)

1 npt

3/4 npt

25 lb (11 kg)

311306

260114

115 VAC

60 Hz

2.00

21 amps

4.0 gpm (15 lpm)

650 psi (45 bar)

3/4 npt

-12 JIC (m)

52 lb (24 kg)

311307

Accessories

260415

260145

Oil Meter with 3/4" npt inlet and outlet ports. Displays in quarts.

Wall Mounting Bracket, fi ts all models

260238

260306

260124

“Y” Strainer with 3/4" npt female in-line strainer for used oil transfer

Inlet Suction Screen Assembly, required for used oil applications, 20 mesh screen

55 in (1.3 m) PVC Suction Tube with inlet check valve

260104

230 VAC

50/60 Hz

0.50

3.9 amps

4.25 gpm (16 lpm)

65 psi (4.5 bar)

1 npt(f)

3/4 npt(f)

25 lbs (11 kg)

311305

260109

115 VAC

60 Hz

1.00

11.0 amps

8.0 gpm (30 lpm)

150 psi (10 bar)

1 npt

3/4 npt

30 lb (14 kg)

311306

260112

12 VDC

N/A

0.75

75 amps

3 gpm (11 lpm)

400 psi (28 bar)

3/4 npt

-12 JIC (m)

27 lb (12 kg)

311307

38

L U B R I C A T I O N E Q U I P M E N T

T R A N S F E R P U M P S

260415 Oil meter

www.graco.com

GTP10 and GTP12

Fuel Transfer Pumps

Features and Benefi ts

• Heavy-duty, die-cast aluminum

• CSA listed motor

• Built-in relief valve and fi lter strainer

• Easy-to-lock security

• High quality, UV resistant automotive fi nish

• Rain proof for extreme weather conditions

• Two year warranty

Typical Applications

• Fuel transfer for the construction, agriculture, manufacturing and marine industries

Typical Fluids Handled

• Gasoline

• Diesel fuel

• Kerosene

• Bio-fuels

Fuel Transfer Kit: Includes pump, fuel nozzle, bung adapter, 34 in (0.9 m) suction tube, 12 ft (3.7 m) grounded hose, elbow fi tting, 18 ft (5.5 m) power cable, wire nuts and strain relief

NOTE: AC units do not include power cable, wire nuts or strain relief

Ordering Information

Kit Number

Voltage

Inlet Port

Outlet Port

Current

Power Cord

Hose

Suction Tube

Weight

Max Fluid Flow

Instruction Manual

260000

12 VDC

1 npt

3/4 npt

12 amps

18 ft (5.5 m)

3/4 in x 12 ft (19 mm x 3.7 m)

1 in x 34 in (25 mm x 0.9 m)

20 lbs (9 kg)

10 gpm (38 lpm)

311304

260020

24 VDC

1 npt

3/4 npt

6 amps

18 ft (5.5 m)

3/4 in x 12 ft (19 mm x 3.7 m)

1 in x 34 in (25 mm x 0.9 m)

20 lbs (9 kg)

10 gpm (38 lpm)

311304

260025

115 VAC

1 npt

3/4 npt

1.7 amps

N/A

3/4 in x 12 ft (19 mm x 3.7 m)

1 in x 34 in (25 mm x 0.9 m)

20 lbs (9 kg)

12 gpm (45 lpm)

311304

260022

230 VAC

1 npt

3/4 npt

1 amps

N/A

3/4 in x 12 ft (19 mm x 3.7 m)

1 in x 34 in (25 mm x 0.9 m)

20 lbs (9 kg)

12 gpm (45 lpm)

311304

Accessories

260078 Unleaded nozzle

260083 Unleaded nozzle with auto shut-off

260082 Regular/diesel nozzle with auto shut-off

260079 Regular/diesel nozzle

260523 8 ft x 34 in (2.4 m) npt UL Listed hose

260521 12 ft x 3/4 in (3.7 m) npt UL Listed hose

260083

www.graco.com

L U B R I C A T I O N E Q U I P M E N T

T R A N S F E R P U M P S

39

Lube Truck Package Solutions

Fire-Ball

®

Oil and Grease Packages

Oil Package Selection and Ordering Information

Ratio

Container Size

Package No.

Bare Pump Only

Hose/Fitting Kit

Hose Length

Air Regulator

Hold-Down Kit

Drum Cover

Bung Adapter

Pump Clamp

Instruction Manual

-

307883

-

307883

204095

307883

-

307883

* For closed-head drums, pump mounts off-center on drum cover. Pump draws through standard 2 npt bung opening and is equipped with grommet for rain-tight seal to the drum cover.

(1)

Order 3/8 in (9.5 mm) air regulator and gauge separately, ( 109075).

(2)

Order 1/2 in (12.7 mm) air regulator ( 104266) and gauge ( 100960) separately.

(3) Off set drum cover

Grease Package Selection and Ordering Information

Fire-Ball 300

Cover-Mounted

Package

Fire-Ball 300

Cover-Mounted

Package

Fire-Ball 425

Cover-Mounted

Package

Fire-Ball 425

Cover-Mounted

Package

Fire-Ball 425

Cover-Mounted

Package

Ratio 50:1 50:1 50:1 50:1 75:1

Container Size

Package No.

Bare Pump Only

Hose/Fitting Kit

Hose Length

Air Regulator

Fire-Ball 300

Cover-Mounted Package

5:1

16 gal (60 l) Open-head

222086

203872

222063

6 ft (1.8 m)

(1)

222061

222060

-

120 lb (55 kg)

Open-head

222085

239887

222072

6 ft (1.8 m)

*

Hold-Down Kit

Drum Cover

222061

222060

Follower Plate

Instruction Manual

220654

307880

* Order 3/8 in (9.5 mm) air regulator and gauge separately, ( 109075).

** Order 1/2 in (12.7 mm) air regulator ( 104266) and gauge ( 100960).

Fire-Ball 300

Cover-Mounted Package

5:1

55 gal (200 l) Closedhead*

206655

203857

222063

6 ft (1.8 m)

(1)

207361

207367

-

400 lb (180kg)

Open-head

222071

239888

222072

6 ft (1.8 m)

*

207361

207366

223845

307880

Fire-Ball 300

Bung-Mounted Package

5:1

55 gal (200 l) Closedhead*

207361

-

204076 (2.140 in Dia.)

120 lb (55 kg)

Open-head

223107

205394

222076

6 ft (1.8 m)

**

222061

222060

223344

307880

204264

204254

222063

6 ft (1.8 m)

(1)

400 lb (180 kg)

Open-head

222075

205395

222076

6 ft (1.8 m)

**

207361

207366

223846

307880

Fire-Ball 425

Cover-Mounted Package

10:1

55 gal (200 l) Closedhead*

206656

222065

222066

6 ft (1.8 m)

(2)

207361

207367

(3)

-

120 lb (55 kg)

Open-head

243817

239729

222076

6 ft (1.8 m)

**

222061

222060

223344

307880

Fire-Ball 425

Bung-Mounted Package

10:1

55 gal (200 l) Closedhead*

222067

222095

222066

6 ft (1.8 m)

(2)

207361

-

224579 (2.159 in Dia.)

204095

307883

Fire-Ball 425

Cover-Mounted

Package

75:1

400 lb (180 kg)

Open-head

243818

239730

222076

6 ft (1.8 m)

*

207361

207366

223846

307880

222086

206656

40

L U B R I C A T I O N E Q U I P M E N T

S P E C I A L T Y P U M P S

222067

223107

243818

www.graco.com

Undercoating/Rust-Proofi ng Packages

Fire-Ball

®

300, 15:1 Packages

Features and Benefi ts

• Available in carbon steel for petroleum-based or SST for water-based materials

• Durable air motor provides trouble-free operation

Typical Applications

• Undercoating, rust-proofi ng and sound-deadening materials

• Automotive and heavy-duty vehicle dealerships

• Fast lube centers and service shops

• Fleet service facilities

Typical Fluids Handled

• Undercoating and rust-proofi ng

(verify chemical compatibility for pump’s wetted components with undercoating material supplier or contact Graco directly at 1-800-533-9655)

226269

224826

Pump Performance psi

(bar) cycles/min

(83)

900

(62)

600

(41)

300

(21)

0

gpm

(lpm)

90 scfm

(m3/min)

12

(0.34)

9

(0.26)

6

(0.17)

0.25 .50 .75 1

(0.95) (1.7) (2.9) (3.8)

3

(0.08)

TEST FLUID: No. 10 Weight Oil

Inlet Air Pressures:

=100 psi

(6.9 bar)

=70 psi

(4.8 bar)

=40 psi

(2.8 bar)

Technical Specifi cations

Maximum Fluid Pressure ......................................................... 2700 psi (186 bar)

Effective Air Motor Diameter ......................................................... 3 in (76.2 mm)

Operating Range ......................................................... 40-180 psi (2.8-12.5 bar)

Continuous-Duty Flow Rate ..................................................... . 0.7 gpm (2.7 lpm)

Approx. Air Consumption @ 100 psi (7 bar) ............................................... 17 cfm

Air Inlet ............................................................................................... 3/8 npt(f)

Material Outlet ..................................................................................... 1/4 npt(f)

Material Inlet for Non-SST Pump ............................................. 1 npt (straight inlet)

Material Inlet for 224825 (SST Pump) ..................................... 1 npt (barbed inlet)

Wetted Parts for Non-SST Pump .............................. CS, Aluminum, PTFE, Rubber

Wetted Parts for SST pump ....................... SST, Aluminum, Leather, PTFE, Rubber

Instruction Manual for non-SST Pump ..................................................... 306531

Instruction Manual for SST Pump ............................................................ 308069

Ordering Information

Style

Container Size

Package No.

Pump

Dispense Kit

Tip

Portable

35 lb (16 kg)

222077

206405

222079

286517

Undercoating

Portable Dolly-Mounted

120 lb (54 kg)

226342

206699

222079

286517

Stationary

400 lb (180 kg)

226269

206700

222082

286517

Hose Length

Cover

15 ft (4.6 m)

222058

15 ft (4.6 m)

204574

25 ft (7.6 m)

200326

Caster Base

Instruction Manual

-

307879/ 306531

204144

307879/ 306531

* Package 224826 includes fl exible short tube (224022) long enough for 400 lb (180 kg) container, but can be trimmed to accommodate smaller containers.

-

307879/ 306531

Spray Masking

Bung-Mounted Stationary

400 lb (180 kg)

224826*

224825 (SST pump)

224023

286211 / 286621

25 ft (7.6 m)

-

-

308069

214570

234237

239966

60-mesh Aluminum fi lter (3/8 npt(f) inlet; 1/4 npt(f) outlet). Maximum working pressure: 3000 psi (210 bar)

Replacement Screen Elements (SST) 3-pack/25-pack

|

238435/ 238436

30-mesh |

238437/ 238438

60-mesh |

238439/ 238440

100-mesh

202577

206496

Z-Swivel allows non-binding movement for hard-to-reach spots. Order 155570 adapter separately to accommodate 234237 gun.

Nozzle Extension delivers 360º coating fan into blind areas. Length 30-3/4 in (99 cm) x 7/8-14(f) end. Tip 206502, size .043.

4 Finger Silver Gun with tip guard 243161 and tip 286517. 4500 psi (310 bar) x 3/8 npt(f) inlet. Must order 155570 adapter and 239663 straight swivel to accommodate gun to 1/4” (mbe) hose.

Bung Adapter

www.graco.com

L U B R I C A T I O N E Q U I P M E N T

S P E C I A L T Y P U M P S

41

Windshield Wash and Coolant Dispense

Pump Package Solutions

Packages for Pre-Mixed Windshield Wash Solvent and Coolant Dispense

307 Air-Operated Double-Diaphragm Pump

237161 Complete package includes the following: 307 Diaphragm Pump ( D31255), 6 ft (1.8 m) air hose ( 109125), 4 ft (1.2 m) coupled nitrile fl uid hose ( 220596), air fi lter ( 110146), air gauge ( 108190), air line fi tting ( 111511), 1/4 npt air regulator ( 110318), elbow ( 100611), 15 in (381 mm) 3/8 in ID tube, ( 187479), mounting bracket ( 190125), adapter ( 156022), 1/4-18 npt nipple ( 156971), suction hose kit ( 223888), 6 ft (1.8 m) coupled PVC hose and 304 SST 16 mesh strainer, wall bracket ( 224835).

237160 Includes all items listed above except diaphragm pump and wall bracket.

Bulk Anti-Freeze and Windshield Solvent Transfer Packages

Description 1040 AODD

Dual Inlet

1040 AODD

Single Inlet

Package Number

Pump

Air Regulator

Fluid Connect Hose

Air Connect Hose

Air Shut-off Valve

Wall Mount Bracket

Dual Inlet Manifold

Suction Kit

Thermal Relief Kit

Instruction Manual

244679

647016

109075

115042

205418

110224

24C637

685984

2- 236054

238428

309353

244680

647016

109075

115042

205418

110224

24C637

236054

238428

309353

716 AODD

Dual Inlet

244681

243669

110147

109105

109125

110223

224835

2- 236054

113497

309353

716 AODD

Single Inlet

244682

241906

110147

109105

109125

110223

224835

236054

113497

309353

42

L U B R I C A T I O N E Q U I P M E N T

S P E C I A L T Y P U M P S

www.graco.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals