Specifications. Strymon Flint v2

Strymon Flint v2 packs a '60s spring, '70s plate, and '80s hall reverb, along with three distinct vintage-inspired tremolo effects modeled after units from the '60s and '60s. Tremolo modes include harmonic filtering, bias-modulated tube emulation, and photocell-based "pulsing." Connect an expression pedal or MIDI controller for flexible real-time control over parameters.

Flint

- tremolo & reverb

Specifications

Input Impedance: 1 Meg Ohm

Output Impedance: 100 Ohm

A/D & D/A: 24-bit 96kHz

Max Input Level +10 dBu

Signal/Noise 115 dB typical

Bypass Switching True Bypass (electromechanical relay switching)

Dimensions 4�5” deep x 4” wide x 1�75” tall

Power Adapter Requirements

Use an adapter with the following rating: 9VDC, center negative, 300mA minimum�

Strymon, the Strymon logo, and Damage Control Engineering are trademarks or registered trademarks of Damage Control Engineering, LLC� in the U�S� and/or other jurisdictions� pg 36