[PICTURE] menu. Panasonic PT-LW376

Add to my manuals
146 Pages

advertisement

[PICTURE] menu. Panasonic PT-LW376 | Manualzz

Chapter 4 Settings - [PICTURE] menu

[PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.

Refer to “Navigating through the menu” ( x page 55) for the operation of the menu screen.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

1) Press as to select [PICTURE MODE].

2) Press qw or the <ENTER> button.

f The [PICTURE MODE] individual adjustment screen is displayed.

3) Press qw to switch the item.

f The items will switch each time you press the button.

[STANDARD]

[DYNAMIC]

The picture becomes suitable for moving images in general.

The light output is maximized for use in bright areas.

[BLACKBOARD] The picture becomes suitable for projecting on a black board.

[WHITE BOARD] The picture becomes suitable for projecting on a white board.

[CINEMA] * 1

[NATURAL] * 2

The picture becomes suitable for movie sources.

The picture becomes suitable for use in low-light areas.

*1 Only for the movie-based signals.

*2 Only for the still image signals.

[CONTRAST]

You can adjust the contrast of the colors.

1) Press as to select [CONTRAST].

2) Press qw or the <ENTER> button.

f The [CONTRAST] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Attention

Adjustment

Brightens the screen and makes the color of image deeper.

Darkens the screen and makes the color of image lighter. f Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].

[BRIGHTNESS]

You can adjust the dark (black) part of the projected image.

1) Press as to select [BRIGHTNESS].

2) Press qw or the <ENTER> button.

f The [BRIGHTNESS] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w

button.

Press the q button.

Adjustment

Increases the brightness of the dark (black) parts of the screen.

Reduces the brightness of the dark (black) parts of the screen.

Adjustment range

-32 ~ +32

Adjustment range

-32 ~ +32

[COLOR]

(Only for movie-based signal input)

You can adjust the color saturation of the projected image.

1) Press as to select [COLOR].

ENGLISH - 59

Chapter 4 Settings - [PICTURE] menu

2) Press qw or the <ENTER> button.

f The [COLOR] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Deepens colors.

Weakens colors.

Adjustment Adjustment range

-32 ~ +32

[TINT]

(Only for the NTSC / NTSC4.43 signal of the <VIDEO IN> terminal or the NTSC / NTSC4.43 signal of Y/C signal of the <COMPUTER 1 IN> terminal)

You can adjust the skin tone in the projected image.

1) Press as to select [TINT].

2) Press qw or the <ENTER> button.

f The [TINT] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Adjustment

Adjusts skin tone toward greenish color.

Adjusts skin tone toward reddish purple.

Adjustment range

-32 ~ +32

[SHARPNESS]

You can adjust the sharpness of the projected image.

1) Press as to select [SHARPNESS].

2) Press qw or the <ENTER> button.

f The [SHARPNESS] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Contours become sharper.

Contours become softer.

Adjustment Adjustment range

0 ~ +15

Note f [SHARPNESS] will be invalid when [DAYLIGHT VIEW] is set to [1], [2] or [3].

[COLOR TEMPERATURE]

You can switch the color temperature if the white areas of the projected image are bluish or reddish.

1) Press as to select [COLOR TEMPERATURE].

2) Press qw or the <ENTER> button.

f The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw to switch the item.

f The items will switch each time you press the button.

[DEFAULT]

[HIGH]

[LOW]

Factory default setting.

Becomes a bluish image. Select this when the white areas of the projected image are reddish.

Becomes a reddish image. Select this when the white areas of the projected image are bluish.

[IRIS]

Aperture correction and signal compensation are performed automatically based on the image to result in an image of optimum contrast.

60 - ENGLISH

Chapter 4 Settings - [PICTURE] menu

1) Press as to select [IRIS].

2) Press qw or the <ENTER> button.

f The [IRIS] individual adjustment screen is displayed.

3) Press qw to switch the item.

f The items will switch each time you press the button.

[OFF]

[ON]

No correction.

Corrects the aperture.

[ADVANCED MENU]

You can perform more advanced image adjustment.

1) Press as to select [ADVANCED MENU].

2) Press the <ENTER> button.

f The [ADVANCED MENU] screen is displayed.

3) Press as to select one item to adjust.

4) Press qw or the <ENTER> button.

f The individual adjustment screen of items are displayed.

5) Press qw to adjust the value.

Items

[CONTRAST R]

[CONTRAST G]

[CONTRAST B]

[BRIGHTNESS R]

[BRIGHTNESS G]

[BRIGHTNESS B]

Operation

Press the w button.

Press the q button.

Press the w button.

Press the q button.

Press the w button.

Press the q button.

Press the w button.

Press the q button.

Press the w button.

Press the q button.

Press the w button.

Press the q button.

Adjustment

Emphasizes red in highlight areas.

Deemphasizes red in highlight areas.

Emphasizes green in highlight areas.

Deemphasizes green in highlight areas.

Emphasizes blue in highlight areas.

Deemphasizes blue in highlight areas.

Emphasizes red in shadow areas.

Deemphasizes red in shadow areas.

Emphasizes green in shadow areas.

Deemphasizes green in shadow areas.

Emphasizes blue in shadow areas.

Deemphasizes blue in shadow areas.

[DAYLIGHT VIEW]

You can correct the image to the optimal vividness even if it is projected under a bright light.

1) Press as to select [DAYLIGHT VIEW].

2) Press qw or the <ENTER> button.

f The [DAYLIGHT VIEW] individual adjustment screen is displayed.

3) Press qw to switch the item.

f The items will switch each time you press the button.

[OFF]

[1]

[2]

[3]

No correction.

Corrects the image to weak vividness.

Corrects the image to medium vividness.

Corrects the image to high vividness.

Adjustment range

-32 ~ +32

-32 ~ +32

-32 ~ +32

-32 ~ +32

-32 ~ +32

-32 ~ +32

[DIGITAL CINEMA REALITY]

You can increase the vertical resolution and enhance the image quality by performing cinema processing when the supported signals are input.

1) Press as to select [DIGITAL CINEMA REALITY].

ENGLISH - 61

Chapter 4 Settings - [PICTURE] menu

2) Press qw or the <ENTER> button.

f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.

3) Press qw to switch the item.

f The items will switch each time you press the button.

[ON]

[OFF]

Performs cinema processing.

Performs no cinema processing.

[NOISE REDUCTION]

(Only for the Video signal of the <VIDEO IN> terminal or the Y/C signal of the <COMPUTER 1 IN> terminal)

You can reduce noises when the input image is degraded and noise is occurring in the image signal.

1) Press as to select [NOISE REDUCTION].

2) Press qw or the <ENTER> button.

f The [NOISE REDUCTION] individual adjustment screen is displayed.

3) Press qw to switch the item.

f The items will switch each time you press the button.

[OFF]

[ON]

Disables [NOISE REDUCTION].

Enables [NOISE REDUCTION].

Attention f When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].

[TV-SYSTEM]

(Only for the Video signal of the <VIDEO IN> terminal or the Y/C signal of the <COMPUTER 1 IN> terminal)

The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal is input. Set the color system matching the input signal.

1) Press as to select [TV-SYSTEM].

2) Press qw or the <ENTER> button.

f The [TV-SYSTEM] individual adjustment screen is displayed.

3) Press qw to select the color system.

f The items will switch each time you press the button.

f Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].

f Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M],

[PAL-N], [SECAM] or [PAL60].)

[RGB/YP

B

P

R

] / [RGB/YC

B

C

R

]

The projector will automatically detect the input signal, but you can set the system format manually when an unstable signal is input. Set the system format matching the input signal.

1) Press as to select [RGB/YP

B

P

R

] or [RGB/YC

B

C

R

].

2) Press qw or the <ENTER> button.

f The [RGB/YP

B

P

R

] or [RGB/YC

B

C

R

] individual adjustment screen is displayed.

3) Press qw to switch the item.

f The items will switch each time you press the button.

f Normally it is set to [AUTO]. If it cannot project properly with [AUTO], set it to [RGB], [YC according to the input signal.

B

C

R

] or [YP

B

P

R

]

62 - ENGLISH

Chapter 4 Settings - [PICTURE] menu

[AUTO]

[RGB]

[YP

B

P

R

]

[YC

B

C

R

]

[RGB], [YP

B

P

R

] or [YC

B

C

R

] is selected automatically.

Select it for RGB signal input.

Select it for YP

B

P

R

signal input.

Select it for YC

B

C

R

signal input.

When COMPUTER 1 / COMPUTER 2 / COMPUTER input is selected

f For 525i (480i), 625i (576i), 525p (480p) and 625p (576p) input

Select [AUTO], [RGB] or [YC

Select [AUTO], [RGB] or [YP

B f For other movie-based signal input

B

C

P

R

R

].

].

When HDMI 1 / HDMI 2 / HDMI input is selected

f For 480/60i, 576/50i, 525p (480p) and 625p (576p) input

Select [AUTO], [RGB] or [YC

B

C

R

].

f For other signal input

Select [AUTO], [RGB] or [YP

B

P

R

].

Note f Refer to “List of compatible signals” ( x page 138) for the signal details.

f The signal selection may not function properly depending on connected devices.

ENGLISH - 63

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents