Menu navigation. Panasonic PT-MZ680

Add to my manuals
210 Pages

advertisement

Menu navigation. Panasonic PT-MZ680 | Manualzz

Chapter 4   Settings — Menu navigation

Menu navigation

The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.

Navigating through the menu

Operating procedure

button

1) Press the <MENU> button on the remote control or control panel.

f The [MAIN MENU] screen is displayed.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

TEST PATTERN

SIGNAL LIST

SECURITY

NETWORK

ENTER

MENU SELECT

SUB MENU

2) Press as to select an item from the main menu.

f The selected item is highlighted in yellow.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

TEST PATTERN

SIGNAL LIST

SECURITY

NETWORK

ENTER

MENU SELECT

SUB MENU

3) Press the <ENTER> button.

f The sub-menu items of the selected main menu are displayed.

POSITION

SHIFT

ASPECT

ZOOM

CLOCK PHASE

REALTIME KEYSTONE

SCREEN ADJUSTMENT

NORMAL

0

ON

OFF

ENTER

MENU SELECT

SUB MENU

74 - ENGLISH

Chapter 4   Settings — Menu navigation

4) Press as to select a sub-menu, and press qw or the <ENTER> button to change or adjust settings.

f

Some items will switch in order as follows each time you press qw

.

A B C f For some items, press qw to display an individual adjustment screen with a bar scale as shown below.

CONTRAST

ADJUST

0

Note f Pressing the <MENU> button while the menu screen is displayed returns to the previous menu.

Same operation is available by pressing the <RETURN> button.

f Some items cannot be adjusted or some functions cannot be used depending on the signal that is input to the projector.

The item in the menu screen is displayed in black text when it cannot be adjusted or selected.

If the item in the menu screen is displayed in black characters and the item cannot be adjusted or set, the factor causing it is displayed by pressing the <ENTER> button while the corresponding menu is selected.

f Some items can be adjusted even if signals are not input.

f Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.

f For menu items, refer to “Main menu” ( x page 76) and “Sub-menu” ( x page 76).

f The cursor color depends on the setting in the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [OSD COLOR]. The selected item is displayed with the yellow cursor by the factory default.

f In the portrait setting, the on-screen menu is displayed sideways.

To display the on-screen menu vertically, change the setting of the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [OSD

ROTATION].

Resetting adjustment values to the factory default

If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory default settings.

button

1) Press the <DEFAULT> button on the remote control.

CONTRAST

ADJUST

0

Note f

You cannot reset all the settings to the factory default at a time.

f

To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute the [PROJECTOR SETUP] menu →

[INITIALIZE].

f

Some items cannot be reset to the factory default settings even when the <DEFAULT> button on the remote control is pressed. Adjust those items individually.

f

The triangular mark under the bar scale in the individual adjustment screen indicates the factory default setting. The position of the triangular mark varies according to the selected input signals.

Current adjustment value

Factory default setting

ENGLISH - 75

Chapter 4   Settings — Menu navigation

Main menu

The following items are in the main menu.

When a main menu item is selected, the screen changes to a sub-menu selection screen.

Main menu item Page

[PICTURE] 79

[POSITION]

[ADVANCED MENU]

[DISPLAY LANGUAGE]

[DISPLAY OPTION]

[PROJECTOR SETUP]

[TEST PATTERN]

[SIGNAL LIST]

[SECURITY]

[NETWORK]

96

110

129

130

85

91

95

133

137

Sub-menu

The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.

[PICTURE]

Sub-menu item

[PICTURE MODE]

[CONTRAST]

[BRIGHTNESS]

[COLOR]

[TINT]

[COLOR TEMPERATURE]

[GAMMA]

[DAYLIGHT VIEW]

[SHARPNESS]

[NOISE REDUCTION]

[DYNAMIC CONTRAST]

[SYSTEM SELECTOR]

*1 Depends on the signal input.

*2 Depends on the [PICTURE MODE].

[POSITION]

Factory default

[STANDARD] *1

[0]

[0]

[0]

[0]

[DEFAULT] *2

[0]

[AUTO] *2

[+6] *2

[OFF] *2

[OFF] *2

[AUTO] *1

81

82

82

82

83

83

Page

79

79

79

80

80

80

Sub-menu item

[SHIFT]

[ASPECT]

[ZOOM]

[CLOCK PHASE]

[REALTIME KEYSTONE]

[SCREEN ADJUSTMENT]

*1 Depends on the signal input.

76 - ENGLISH

Factory default

[NORMAL]

[0] *1

[OFF]

[OFF]

Page

85

85

86

87

87

88

Chapter 4   Settings — Menu navigation

[ADVANCED MENU]

Sub-menu item

[DIGITAL CINEMA REALITY]

[BLANKING]

[INPUT RESOLUTION]

[EDGE BLENDING]

[CLAMP POSITION]

[RASTER POSITION]

*1 Depends on the signal input.

Note f

The factory default setting varies depending on the selected input terminal.

Factory default

[AUTO] *1

[OFF]

[24] *1

[DISPLAY LANGUAGE]

Page

91

91

92

92

94

94

Details ( x page 95)

[DISPLAY OPTION]

Sub-menu item

[COLOR ADJUSTMENT]

[COLOR CORRECTION]

[SCREEN SETTING]

[AUTO SIGNAL]

[AUTO SETUP]

[COMPUTER IN]

[HDMI IN]

[DIGITAL LINK IN]

[ON-SCREEN DISPLAY]

[SIGNAL SEARCH]

[BACK COLOR]

[STARTUP LOGO]

[UNIFORMITY]

[SHUTTER SETTING]

[P-TIMER]

[FREEZE]

[DIGITAL ZOOM]

[PROJECTOR SETUP]

Sub-menu item

[PROJECTOR ID]

[PROJECTION METHOD]

[ECO MANAGEMENT]

[INITIAL STARTUP]

[STARTUP INPUT SELECT]

[DATE AND TIME]

[SCHEDULE]

[MULTI PROJECTOR SYNC]

[RS-232C]

[REMOTE2 MODE]

[FUNCTION BUTTON]

[LENS]

[AUDIO SETTING]

Factory default

[OFF]

[OFF]

[OFF]

[ON]

[BLUE]

[DEFAULT LOGO]

Factory default

[ALL]

[LAST MEMORY]

[LAST USED]

[OFF]

[DEFAULT]

105

105

105

107

99

101

102

104

Page

96

96

97

97

97

98

108

109

109

115

116

118

120

120

120

121

Page

110

110

111

113

113

114

ENGLISH - 77

Sub-menu item

[FILTER COUNTER]

[DC OUT]

[STATUS]

[DATA CLONING]

[SAVE ALL USER DATA]

[LOAD ALL USER DATA]

[HDMI CEC]

[INITIALIZE]

[SERVICE PASSWORD]

[TEST PATTERN]

Details ( x page 129)

[SIGNAL LIST]

Chapter 4   Settings — Menu navigation

Factory default

[ON]

[ON]

Page

123

124

124

125

125

125

126

128

128

Details ( x page 130)

[SECURITY]

Sub-menu item

[SECURITY PASSWORD]

[SECURITY PASSWORD CHANGE]

[DISPLAY SETTING]

[TEXT CHANGE]

[MENU LOCK]

[MENU LOCK PASSWORD]

[CONTROL DEVICE SETUP]

[CONTROL DEVICE PASSWORD CHANGE]

[NETWORK]

Factory default

[OFF]

[OFF]

[OFF]

Sub-menu item

[ETHERNET TYPE]

[DIGITAL LINK]

[WIRED LAN]

[PROJECTOR NAME]

[NETWORK STATUS]

[ADMINISTRATOR ACCOUNT]

[NETWORK SECURITY]

[NETWORK CONTROL]

[PJLink]

[Art-Net]

Factory default

[LAN]

Page

137

137

139

139

140

140

142

143

143

145

Note f

Some items may not be adjusted or used for certain signal formats to be input to the projector.

The item in the menu screen is displayed in black text when it cannot be adjusted or selected.

f

Display of the sub-menu item and the value of factory default setting vary depending on the selected input.

Page

133

133

133

134

134

134

135

136

78 - ENGLISH

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents