Web control function. Panasonic PT-MZ680

Add to my manuals
210 Pages

advertisement

Web control function. Panasonic PT-MZ680 | Manualzz

Chapter 5   Operations — Web control function

Web control function

Following operation is possible from a computer using the web control function.

f Setting and adjustment of the projector f Display of the projector status f Sending E-mail messages when there is a problem with the projector

The projector supports “Crestron Connected”, and the following application software of Crestron Electronics, Inc. can be used.

f

RoomView Express f Crestron Fusion

Note f

Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.

f

“Crestron Connected” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems connected to a network using a computer.

f

For details of the “Crestron Connected”, visit the website of Crestron Electronics, Inc. (English only.)

URL https://www.crestron.com/

Download “RoomView Express” from the Crestron Electronics, Inc. website. (English only.)

URL https://www.crestron.com/resources/get-roomview

Computer that can be used for setting

To use the web control function, a web browser is required. Confirm that the web browser can be used in advance.

OS

Windows

Mac OS iOS

Android

Compatible browser

Internet Explorer 11.0

Microsoft Edge

Safari 10.0/11.0/12.0/13.0/14.0

Safari (version equipped with iOS 10, iOS 11, iOS 12, iOS 13, iOS 14)

Google Chrome (version equipped with Android 6.0/7.0/8.0/9.0/10.0/11.0)

Accessing from the web browser

1) Start up the web browser on the computer.

2) Enter the IP address set on the projector into the URL entry field of the web browser.

f If the user name and password of the administator account have been set on the initial setting screen

( x page 55) or on the [NETWORK] menu → [ADMINISTRATOR ACCOUNT] ( x page 140) , proceed to f

Step 7) .

The [Set up password] page is displayed if the administrator account has not been set.

3) In [User name], enter the user name of the administrator account.

f The factory default setting of user name is "dispadmin".

4) In [Password], enter the password of the administrator account.

f The password cannot be blank.

f A password consisting of at least eight single-byte characters is recommended.

f A password consisting of at least three of the following four character types is recommended. g Uppercase letters

ENGLISH - 151

Chapter 5   Operations — Web control function g Lowercase lettters g Digits g

Symbols (~!@#$%^&*()_+\|}{][<>.,/?`)

5) In [Password(Retype)], re-enter the password entered in Step 4).

6) Click [Change].

f Setting of the administrator account is completed.

7) Enter the user name and password on the displayed login screen.

The server 192.168.0.8 is asking for your user name and password.

f Enter the user name and password of the administrator account, or the user name and password of a standard user account without administrator rights.

8) Click [OK].

Attention f The entry screen for the user name and password may be hidden by other window that is already opened. In such case, minimize the window in front to display the entry screen.

Note f The user name and password of the standard user account can be set on the [Set up password] page ( x page 162) of the administrator account.

f If you use a web browser to control the projector, set the [NETWORK] menu → [NETWORK CONTROL] → [WEB CONTROL] to [ON].

f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers.

f Access will be locked for few minutes when an incorrect password is entered three times consecutively.

f Some items on the projector setting page use the JavaScript function of the web browser. Correct control may not be possible when the web browser is set not to use this function.

f If the screen for the web control is not displayed, consult your network administrator.

f While updating the screen for the web control, the screen may appear white for a moment, but it is not a malfunction.

f Screenshot of a computer

The size or the display of the screen may be different from this manual depending on the OS or the Web browser, or the type of computer in use.

Rights for each account

The administrator account allows use of all functions. There is a limitation in the functions that can be used with the standard user account. Select the account depending on the purpose.

The function that has l in the administrator / standard user column indicates that it can be operated with their respective accounts.

Item

[Status]

[Projector control]

Function

[Projector status]

Error information page

[Network status]

[Access error log]

[Mail error log]

[Basic control]

[Detail control]

Administrator l l l l l l l

Standard User l l l

― l

Page

153

154

154

154

155

155

156

152 - ENGLISH

Item

[Detailed set up]

[Set up password]

Descriptions of items

Chapter 5   Operations — Web control function

Function

[Network config]

[Adjust clock]

[Ping test]

[Network security]

[E-mail set up]

[Authentication set up]

[ECO management set up]

[Crestron tools]

User name of [Administrator]

User name of [User]

Password of [Administrator]

Password of [User]

Password of [PJlink]

Administrator l l l l l l l l l l l l l

Standard User

― l

160

162

162

162

162

162, 164

163

Page

156

157

158

158

158

159

1

4

5

2

3

1 Page tab

Switches pages by clicking this item.

2 [Status]

The status of the projector is displayed by clicking this item.

3 [Projector control]

The [Projector control] page is displayed by clicking this item.

[Projector status] page

Click [Status] → [Projector status].

Display the status of the projector for the following items.

4 [Detailed set up]

The [Detailed set up] page is displayed by clicking this item.

5 [Set up password]

The [Set up password] page is displayed by clicking this item.

5

6

7

3

4

1

2

8

15

16

17

18

11

12

13

14

19

20

1 [PROJECTOR TYPE]

Displays the type of the projector.

2 [PROJECTOR NAME]

Displays the projector name set for the projector.

3 [MAIN VERSION]

Displays the main version of the firmware of the projector.

4 [POWER]

Displays the status of the power.

5 [SHUTTER]

Displays the status of the shutter. ([CLOSE]: Shutter function enabled; [OPEN]: Shutter function disabled)

ENGLISH - 153

Chapter 5   Operations — Web control function

6 [LIGHT POWER]

Displays the setting status of [LIGHT POWER].

7 [PICTURE MODE]

Displays the setting status of [PICTURE MODE].

8 [SERIAL NUMBER]

Displays the serial number of the projector.

9 [OSD]

Displays the status of the on-screen display.

10 [VOLUME]

Display the volume status.

11 [LIGHT OUTPUT]

Displays the setting status of [LIGHT OUTPUT].

12 [REMOTE2 STATUS]

Displays the control status of the <REMOTE 2 IN> terminal.

13 [INPUT]

Displays the status of the selected input.

14 [INTAKE AIR TEMPERATURE]

Displays the status of the intake air temperature of the projector.

15 [EXHAUST AIR TEMPERATURE]

Displays the status of the exhaust air temperature of the projector.

16 [LIGHT TEMPERATURE1]

Displays the temperature status of light source 1.

17 [LIGHT TEMPERATURE2]

(Only for PT-MZ880 and PT-MZ780)

Displays the temperature status of light source 2.

18 [LIGHT]

Displays the lighting status and runtime of the light source.

19 [SELF TEST]

Displays the self-diagnosis information.

20 [PROJECTOR RUNTIME]

Displays the runtime of the projector.

Error information page

When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status] screen, click it to display the content of the error/warning.

f The projector may go into the standby status to protect the projector depending on the contents of the error.

1

2

1 Display of error information

Displays the alphanumeric symbols and content of errors/ warnings that occur.

For the details of the display content, refer to “[SELF TEST] display” ( x page 183).

[Network status] page

Click [Status] → [Network status].

The current network setting status is displayed.

2 Error code

[Access error log] page

Click [Status] → [Access error log].

The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords.

154 - ENGLISH

Chapter 5   Operations — Web control function

[Mail error log] page

Click [Status] → [Mail error log].

E-mail error log is displayed if periodic E-mail sending has failed.

Note f

[Access error log] and [Mail error log] display the recent few thousand accesses/requests. All information may not be displayed when many accesses/requests are made at once.

f

Logs in [Access error log] and [Mail error log] are deleted from the oldest when exceeding a certain amount.

f

Check [Access error log] and [Mail error log] periodically.

[Basic control] page

Click [Projector control] → [Basic control].

3

4

1

2

5

6

1 [POWER]

Turns off/on the power.

2 [SHUTTER]

Switches the status of the shutter. ([CLOSE]: Shutter function enabled; [OPEN]: Shutter function disabled)

3 [OSD]

Switches on (display)/off (hide) the on-screen display function.

4 [SYSTEM]

Switches the system method.

5 On-screen display of the projector

Displays the same items as shown on the on-screen display of the projector. You can check or change the settings of the menus.

It is displayed even if the on-screen display function is set to off

(hide).

6 [INPUT SELECT]

Switches the input signal.

ENGLISH - 155

Chapter 5   Operations — Web control function

[Detail control] page

Click [Projector control] → [Detail control].

1

2

3

4

5

6

7

8

9

1 Control of the projector

The projector is controlled by clicking the buttons in the same way as the buttons on the remote control. After control, the on-screen display of the projector at the right of the control page is updated.

2 [SUB MEMORY]

Switches the sub memory.

3 [DAYLIGHT VIEW]

Switches the day light view setting.

4 [FREEZE]

Temporarily pauses the image.

5 [MUTE]

Switches whether to use the mute function.

6 [STATUS]

The [STATUS] screen is displayed on the projected image.

7 [LENS]

Displays the [LENS] page.

8 [TEST PATTERN]

Displays the test pattern.

9 [GET OSD]

Updates the on-screen display of the projector at the right of the control page.

[LENS] page

Click [Projector control] → [Detail control] → [LENS].

1

2

3

4

5

1 [HOME POSITION]

Moves the projection lens to the home position.

2 [SHIFT]

Click asqw

to adjust the lens shift (vertical position and horizontal position).

The adjustment can be performed faster by holding down the button for approximately three seconds or longer.

3 [FOCUS]

Click qw

to adjust the focus.

The adjustment can be performed faster by holding down the button for approximately three seconds or longer.

[Network config] page

4 [ZOOM]

Click qw to adjust the zoom.

The adjustment can be performed faster by clicking and holding the button for approximately three seconds or longer.

5 [Back]

Returns to the [Detail control] page.

Click [Detailed set up] → [Network config].

f Click [Network config] to display the [CAUTION!] screen.

f Click the [Next] button to display the current settings.

f Click the [Change] button to display the setting change screen.

156 - ENGLISH

Chapter 5   Operations — Web control function

4

5

1

2

8

1 [PROJECTOR NAME]

Enter the name of the projector. Enter the host name if it is required when using a DHCP server etc.

2 [DHCP ON], [DHCP OFF]

To enable the DHCP client function, set to [DHCP ON].

3 [IP ADDRESS]

Enter the IP address when not using a DHCP server.

4 [SUBNET MASK]

Enter the subnet mask when not using a DHCP server.

5 [DEFAULT GATEWAY]

Enter the default gateway address when not using a DHCP server.

6 [DNS1]

Enter the DNS1 server address.

Permissible characters for the entry of DNS1 server address

(primary):

Numbers (0 - 9), period (.)

(Example: 192.168.0.253)

Note

7 [DNS2]

Enter the DNS2 server address.

Available characters for the entry of DNS2 server address

(secondary):

Numbers (0 - 9), period (.)

(Example: 192.168.0.254)

8 [Back], [Next]

Click the [Back] button to return to the original screen. Click the

[Next] button to display the setting confirmation screen. Click the

[Submit] button to update the setting.

f When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click

[Network config] again since the following operation will not be guaranteed.

f The connection may be disconnected when the LAN setting is changed while connected with LAN.

[Adjust clock] page

Click [Detailed set up] → [Adjust clock].

Crestron tools

Network security

1

2

5

6

3

4

7

1 [Time Zone]

Select the time zone.

2 [Set time zone]

Updates the time zone setting.

3 [NTP SYNCHRONIZATION]

Set to [ON] when setting the date and time automatically.

4 [NTP SERVER NAME]

Enter the IP address or server name of the NTP server when you set to adjust the date and time manually.

(To enter the server name, the DNS server needs to be set up.)

5 [Date]

Enter the date to be changed.

6 [Time]

Enter the time to be changed.

7 [Submit]

Updates the date and time settings.

ENGLISH - 157

Chapter 5   Operations — Web control function

Note f

The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult your dealer.

[Ping test] page

Check whether the network is connected to the E-mail server, POP server, DNS server, etc.

Click [Detailed set up] → [Ping test].

Crestron tools

Network security

1

2

3

4

1 [Input IP address]

Enter the IP address of the server to be tested.

2 [Submit]

Executes the connection test.

3 Example of display when the connection has succeeded

4 Example of display when the connection has failed

[Network security] page

Make settings to protect the projector from external attacks via LAN and unauthorized use.

Click [Detailed set up] → [Network security].

1

2

1 [COMMAND PROTECT]

Make settings for the connection authentication when using the command control function.

[DISABLE]: Connect to the projector in non-protected mode.

Connection authentication is not performed.

[ENABLE]: Connect to the projector in protected mode.

The user name and password of the administrator account are required for the connection authentication.

Note

2 [Submit]

Updates the setting.

If you click [Submit] with [DISABLE] selected in [COMMAND

PROTECT], a confirmation screen will be displayed. Click [OK] on the confirmation screen to update the settings.

f When [COMMAND PROTECT] is set to [DISABLE], connection authentication is not performed, making it vulnerable to threats on the network. Be aware of the risks before making settings.

f For details on how to use the command control function, refer to "Control commands via LAN". ( x page 191)

[E-mail set up] page

When there is a problem or the runtime of the light source reaches the preset value, an E-mail can be sent to previously set E-mail addresses (up to two addresses).

Click [Detailed set up] → [E-mail set up].

158 - ENGLISH

Chapter 5   Operations — Web control function

Network security

Crestron tools

3

4

1

2

5

6

1 [ENABLE]

Select [Enable] to use the E-mail function.

2 [SMTP SERVER NAME]

Enter the IP address or the server name of the E-mail server

(SMTP). To enter the server name, the DNS server needs to be set up.

3 [MAIL FROM]

Enter the E-mail address of the projector. (Up to 63 characters in single byte)

4 [MEMO]

Enter information such as the location of the projector that notifies the sender of the E-mail. (Up to 63 characters in single byte)

5 [MINIMUM TIME]

Change the minimum interval for the temperature warning E-mail.

The default value is 60 minutes. In this case, another E-mail will not be sent for 60 minutes after sending the temperature warning

E-mail even if it reaches the warning temperature.

6 [INTAKE AIR TEMPERATURE]

Change the temperature setting for the temperature warning mail. A temperature warning E-mail is sent when the temperature exceeds this value.

Network security

Crestron tools

Network security

Crestron tools

7

7

8 8

9

7 [E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2]

Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 2] blank when two E-mail addresses are not to be used.

8 Settings of the conditions to send E-mail

Select the conditions to send E-mail.

[MAIL CONTENTS]:

Select either [NORMAL] or [SIMPLE].

[ERROR]:

Send an E-mail when an error occurred in the self-diagnosis.

[INTAKE AIR TEMPERATURE]:

Send an E-mail when the intake air temperature has reached the value set at the above field.

[PERIODIC REPORT]:

Place a check mark on this to send an E-mail periodically.

It will be sent on the days and time with the check mark.

9 [Submit]

Update the settings.

[Authentication set up] page

Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.

Click [Detailed set up] → [Authentication set up].

Network security

Crestron tools

3

4

1

2

7

8

5

6

ENGLISH - 159

Chapter 5   Operations — Web control function

1 [Auth]

Select the authentication method specified by your Internet service provider.

2 [SMTP Auth]

Set when the SMTP authentication is selected.

3 [POP server name]

Enter the POP server name.

Allowed characters:

Alphanumerics (A - Z, a - z, 0 - 9)

Minus sign (-) and period (.)

4 [User name]

Enter the user name for the POP server or the SMTP server.

[ECO management set up] page

5 [Password]

Enter the password for the POP server or the SMTP server.

6 [SMTP server port]

Enter the port number of the SMTP server.

(Normally 25)

7 [POP server port]

Enter the port number of the POP server.

(Normally 110)

8 [Submit]

Update the settings.

Settings related to the ECO management function of the projector can be made.

Click [Detailed set up] → [ECO management set up].

1

2

3

5

8

1 [LIGHT POWER]

Displays the [LIGHT POWER] setting.

2 [AMBIENT LIGHT DETECTION]

Enables ([ON])/disables ([OFF]) the ambient light detection function.

3 [NO SIGNAL LIGHTS-OUT]

Enables ([ON])/disables ([OFF]) the signal detection function.

4 [POWER MANAGEMENT]

Displays the [POWER MANAGEMENT] setting.

5 [NO SIGNAL SHUT-OFF]

Select the time until the light source is turned off after the power management function is operated.

6 [QUIK STARTUP]

Displays the [QUICK STARTUP] setting.

7 [VALID PERIOD]

Select the valid period until the [QUICK STARTUP] function is disabled after going into the standby mode.

8 [Submit]

Updates the setting.

Note f For details of each setting item, refer to the [PROJECTOR SETUP] menu of the projector → [ECO MANAGEMENT].

160 - ENGLISH

Chapter 5   Operations — Web control function

Contents of E-mail sent

Example of the E-mail sent when E-mail is set

The following E-mail is sent when the E-mail settings have been established.

=== Panasonic projector report(CONFIGURE) ===

Projector Type : PT-MZ880

Serial No : 123456789012

----- E-mail setup data -----

TEMPERATURE WARNING SETUP

MINIMUM TIME at [ 60] minutes interval

INTAKE AIR TEMPERATURE Over [ 46 degC / 114 degF ]

ERROR [ ON ]

INTAKE AIR TEMPERATURE [ OFF ]

PERIODIC REPORT

Sunday [ OFF ] Monday [ OFF ] Tuesday [ OFF ] Wednesday [ OFF ]

Thursday [ OFF ] Friday [ ON ] Saturday [ OFF ]

00:00 [ OFF ] 01:00 [ OFF ] 02:00 [ OFF ] 03:00 [ OFF ]

04:00 [ OFF ] 05:00 [ OFF ] 06:00 [ OFF ] 07:00 [ OFF ]

08:00 [ OFF ] 09:00 [ OFF ] 10:00 [ OFF ] 11:00 [ OFF ]

12:00 [ OFF ] 13:00 [ OFF ] 14:00 [ OFF ] 15:00 [ OFF ]

16:00 [ ON ] 17:00 [ OFF ] 18:00 [ OFF ] 19:00 [ OFF ]

20:00 [ OFF ] 21:00 [ OFF ] 22:00 [ OFF ] 23:00 [ OFF ]

----- Error information -----

Error code :

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Intake air temperature : 24 degC / 75 degF

Exhaust air temperature : 31 degC / 87 degF

Light temperature1 : 25 degC / 77 degF

Light temperature2 : 25 degC / 77 degF

PROJECTOR RUNTIME 7 H

POWER ON 16 times

LIGHT RUNTIME 7 H

LIGHT ON 16 times

-------- Current status ---------

MAIN VERSION 0.16

SUB VERSION 0.08

LIGHT STATUS LIGHT=OFF

INPUT HDMI3

REMOTE2 STATUS DISABLE

----- Wired Network configuration -----

DHCP Client OFF

IP address 192.168.0.8

MAC address 68:CF:1C:17:1B:43

Fri Jan 22 16:28:55 2021

----- Memo -----

Example of the E-mail sent for an error

The following E-mail is sent when an error has occurred.

=== Panasonic projector report(ERROR) ===

Projector Type : PT-MZ880

Serial No : 123456789012

----- Error information -----

H11 Intake air temp. sensor error

Error code :

00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00

Intake air temperature :-100 degC / -148 degF

Exhaust air temperature : 32 degC / 89 degF

Light temperature1 : 25 degC / 77 degF

Light temperature2 : 25 degC / 77 degF

PROJECTOR RUNTIME 6 H

POWER ON 15 times

LIGHT RUNTIME 6 H

LIGHT ON 15 times

-------- Current status ---------

MAIN VERSION 0.16

SUB VERSION 0.08

LIGHT STATUS LIGHT=OFF

INPUT HDMI3

REMOTE2 STATUS DISABLE

----- Wired Network configuration -----

DHCP Client OFF

IP address 192.168.0.8

MAC address 68:CF:1C:17:1B:43

Fri Jan 22 15:40:56 2021

----- Memo ------

ENGLISH - 161

Chapter 5   Operations — Web control function

[Crestron tools] page

Set the information required to connect the Crestron control system to the projector.

Click [Detailed set up] → [Crestron tools].

Eco management

Network security

Crestron tools

3

4

1

2

1 [IP Address]

Set the IP address of the control system.

2 [IPID]

Set the IPID of the control system.

3 [Port]

Set the port number of the control system.

4 [Submit]

Update the setting.

[Set up password] page (for administrator account)

Click [Set up password].

1

2

4

1 [Administrator]

Used to change the setting of the administrator account.

2 [User]

Used to change the setting of the standard user account.

3 [PJLink]

Used to change the setting of the PJLink account.

4 [Next]

Used to change the setting of the password.

[Administrator]

The user name and password of the administrator account can be set.

1

2

3

4

162 - ENGLISH

Chapter 5   Operations — Web control function

1 [Account]

Displays the account to change.

2 [Current]

[User name]:

Enter the current user name.

[Password]:

Enter the current password.

3 [New]

[User name]:

Enter the desired new user name. (Up to 16 characters in single byte)

[Password]:

Enter the desired new password. (Up to 16 characters in single byte)

[Password(Retype)]:

Enter the desired new password again.

4 [OK]

Determines the change of password.

Note f When the projector is already registered in application software (such as “Multi Monitoring & Control Software”) which uses the communication control via LAN, communication with the projector will become impossible if the user name or password for [Administrator] is changed. If the user name or password for [Administrator] is changed, update the registration information of the application software in use.

[User]

The user name and password of the standard user account can be set.

1

2

3

1 [Account]

Displays the account to change.

2 [New]

[User name]:

Enter the desired new user name. (Up to 16 characters in single byte)

[Password]:

Enter the desired new password. (Up to 16 characters in single byte)

[Password(Retype)]:

Enter the desired new password again.

[PJLink]

The password of the PJLink account can be changed.

3 [OK]

Determines the change of password.

1

2

3

1 [Account]

Displays the account to change.

2 [New]

[Password]:

Enter the desired new password. (Up to 32 characters in single byte)

3 [OK]

Determines the change of password.

ENGLISH - 163

Chapter 5   Operations — Web control function

[Set up password] (for standard user account)

The password of the standard user account can be changed.

1

2

3

4

1 [Old Password]

Enter the current password.

2 [New Password]

Enter the desired new password. (Up to 16 characters in single byte)

3 [Retype]

Enter the desired new password again.

4 [OK]

Determines the change of password.

164 - ENGLISH

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents