Specifications. Panasonic PT-MZ680

Add to my manuals
210 Pages

advertisement

Specifications. Panasonic PT-MZ680 | Manualzz

Chapter 7   Appendix — Specifications

Specifications

The specifications of the projector are as follows.

Display system

Display device

Size of effective display area

Number of pixels

Projection lens

Light source

Screen size

Light output *1 *2

Contrast ratio *1

Supplied projection lens

Zoom

Focus

Lens shift

Changeable lens

Translucent screen LCD panel x 3, 3 primary colors system

19.3 mm (0.76") (aspect ratio 16:10)

2 304 000 pixels (1 920 x 1 200 dots)

Throw ratio: 1.6 to 2.8:1

F = 1.7 to 2.3

f = 26.8 mm to 45.5 mm

Powered

Powered

Powered (Horizontal/Vertical)

Yes

Laser diode

1.02 m (40") to 10.16 m (400")

1.52 m (60") to 10.16 m (400") with ET-ELW22

PT-MZ880 8 000 lm

PT-MZ780 7 000 lm

When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT

POWER] in [ECO MANAGEMENT] is set to [NORMAL]

PT-MZ680 6 000 lm

PT-MZ880

PT-MZ780

PT-MZ680

5 600 lm

4 900 lm

4 200 lm

When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT

POWER] in [ECO MANAGEMENT] is set to [ECO] or [QUIET]

3 000 000:1

When [PICTURE MODE] is set to [DYNAMIC], [DYNAMIC

CONTRAST] is set to [1] or [2], and HDMI signal is input

85%

27 kHz to 135 kHz

Center to corner zone ratio *1

Displayable scanning frequency

Horizontal

Vertical 24 Hz to 60 Hz

Input compatibility

HDMI signal input

DIGITAL LINK signal input

RGB signal input

YC

B

C

R input

/YP

B

P

R

signal

Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160/60p

Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)

Dot clock frequency: 25 MHz to 594 MHz

Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160/60p

Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)

Dot clock frequency: 25 MHz to 297 MHz

Resolution: 640 x 480 to 1 920 x 1 200

Dot clock frequency: 162 MHz or less

PIAS (Panasonic Intelligent Auto Scanning) system

Resolution: 480/60p, 576/50p to 1 920 x 1 080

Dot clock frequency: 148.5 MHz or less

The HD/SYNC and VD terminals do not support 3 value SYNC.

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.

*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.

200 - ENGLISH

Chapter 7   Appendix — Specifications

Connecting terminals

<HDMI IN 1> terminal

<HDMI IN 2> terminal

<HDMI IN 3> terminal

<DIGITAL LINK/LAN> terminal

<LAN> terminal

<COMPUTER IN> terminal

HDMI x 3, HDCP 2.3 compatible, Deep Color compatible

Audio signal Linear PCM (sampling frequency: 48 kHz/44.1 kHz/32 kHz)

RJ-45 x 1, for network and DIGITAL LINK connections (HDBaseT TM compliant), PJLink (class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.3 compatible, Deep Color compatible

RJ-45 x 1, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible

High-density D-Sub 15 p (female) x 1

RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)

SYNC/HD TTL high impedance, automatic positive/negative polarity compatible

VD TTL high impedance, automatic positive/negative polarity compatible

YP

B

P

R

signal Y: 1.0 V [p-p] including synchronization signal, P

B

P

R

: 0.7 V [p-p] 75 Ω

High-density D-Sub 15 p (female) x 1

<MONITOR OUT> terminal

RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)

SYNC/HD TTL high impedance, positive/negative polarity

VD TTL high impedance, positive/negative polarity

YP

B

P

R

signal Y: 1.0 V [p-p] including synchronization signal, P

B

P

R

: 0.7 V [p-p] 75 Ω

<AUDIO IN> terminal M3 stereo mini jack x 1, 0.5 V [rms], input impedance 22 kΩ or more

<AUDIO OUT> terminal M3 stereo mini jack x 1, 0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or lower

<SERIAL/MULTI SYNC

IN> terminal

D-Sub 9 p x 1, RS-232C compliant, for computer control

<MULTI SYNC OUT> terminal

D-Sub 9 p x 1

<REMOTE 1 IN> terminal M3 stereo mini jack x 1, for remote control (wired)

<REMOTE 2 IN> terminal D-Sub 9 p x 1 , for contact control

<DC OUT> terminal USB connector (type A) x 1, for power supply only (DC 5 V, maximum 2 A)

Acoustic noise

Operating environment

*1

PT-MZ780,

PT-MZ680

26 dB

Operating temperature 0 °C (32 °F) to 45 °C (113 °F) *2

Operating humidity

PT-MZ880

PT-MZ780,

PT-MZ680

PT-MZ880

34 dB

32 dB

27 dB

20 % to 80 % (no condensation)

When [LIGHT POWER] in [ECO MANAGEMENT] is set to

[NORMAL] or [ECO].

When [LIGHT POWER] in [ECO MANAGEMENT] is set to

[QUIET]

Operation position [FLOOR/CEILING], [FRONT/REAR]

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.

*2 The projector cannot be used at an altitude of 2 700 m (8 858') or higher above sea level.

If the operating environment temperature exceeds the following value, the light output may be reduced to protect the projector.

f When using the projector at an altitude lower than 700 m (2 297') above sea level: 38 °C (100 °F) f

When using the projector at an altitude between 700 m (2 297') and 1 400 m (4 593') above sea level: 36 °C (97 °F) f When using the projector at an altitude between 1 400 m (4 593') and 2 100 m (6 890') above sea level: 34 °C (93 °F) f

When using the projector at an altitude between 2 100 m (6 890') and 2 700 m (8 858') above sea level: 32 °C (90 °F)

ENGLISH - 201

Chapter 7   Appendix — Specifications

Power requirements

Maximum power consumption

Standby mode power consumption

Standard outside dimensions

Weight *1

Outer case

Width

Height

Depth

Materials

Color

Power cord length

Laser

Classification

Risk Group

Remote control

Laser Class

Power requirements

Operating range

Weight

Outside dimensions

110 V ~ (110 V alternating current), 60 Hz (for Taiwan)

100 V - 240 V

~

(100 V - 240 V alternating current), 50 Hz/60 Hz (for other countries and regions)

PT-MZ880

490 W (5.0 A) (for Taiwan)

490 W (5.4 A - 2.6 A) (The power consumption is 465 W at 200 V - 240 V.)

(for other countries and regions)

435 W (4.5 A) (for Taiwan)

PT-MZ780

435 W (4.8 A - 2.3 A) (The power consumption is 415 W at 200 V - 240 V.)

(for other countries and regions)

360 W (4.0 A) (for Taiwan)

PT-MZ680

Approx. 0.5 W

Approx. 15 W

Approx. 35 W

360 W (4.2 A - 2.0 A) (The power consumption is 345 W at 200 V - 240 V.)

(for other countries and regions)

When [STANDBY MODE] is set to [ECO]

When [STANDBY MODE] is set to [NORMAL], [IN STANDBY

MODE] in [AUDIO SETTING] is set to [OFF], [QUICK STARTUP] is set to [OFF], and <DC OUT> terminal is not in use

When [STANDBY MODE] is set to [NORMAL], [IN STANDBY

MODE] in [AUDIO SETTING] is set to [ON], [QUICK STARTUP] is set to [OFF], and <DC OUT> terminal supplies power (2 A)

PT-MZ880,

PT-MZ780

PT-MZ680

Approx. 115 W When [STANDBY MODE] is set to [NORMAL], [IN STANDBY

Approx. 100 W

MODE] in [AUDIO SETTING] is set to [ON], [QUICK STARTUP] is set to [ON], and <DC OUT> terminal supplies power (2 A)

561 mm (22-3/32")

224 mm (8-13/16") (with the feet at shortest position)

439 mm (17-9/32") (including standard zoom lens)

PT-MZ880,

PT-MZ780

PT-MZ680

Approx. 18.6

Approx. 17.6 k k

]

]

(41 lbs.) (including standard zoom lens)

(39 lbs.) (including standard zoom lens)

Molded plastic

White / Black

For Taiwan: 2.0 m (78-3/4")

For other countries and regions: 3.0 m (118-1/8")

USA and Canada: Class 3R (IEC 60825-1:2007)

Other countries or regions: Class 1 (IEC/EN 60825-1:2014)

Standard zoom lens /

ET-ELS20, ET-ELW20,

ET-ELT22, ET-ELW22,

ET-ELW21

ET-ELT23

Risk group 2 (IEC 62471-5:2015)

Risk group 3 (IEC 62471-5:2015)

DC 3 V (AAA/R03/LR03 battery x 2)

Within approx. 30 m (98'5") (when operated directly in front of signal receiver)

102 ] (3.6 ozs.) (including batteries)

Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")

*1 Average value. Weight varies for each product.

Note f

The model numbers of accessories and optional accessories are subject to change without prior notice.

202 - ENGLISH

Dimensions

Unit: mm (inch)

Chapter 7   Appendix — Specifications

561 (22-3/32")

281 (11-1/16")

326 (12-27/32")

470 (18-1/2")

* The above dimensions are obtained when the standard zoom lens is attached.

* Actual dimensions may differ depending on the product.

Precautions for attaching the Ceiling Mount Bracket

f

When installing the projector to a ceiling, use the Ceiling Mount Bracket (Model No.: ET-PKD120H (for High

Ceilings), ET-PKD120S (for Low Ceilings)) together with Ceiling Mount Bracket (Model No.: ET-PKE301B

(Projector Mount Bracket)).

Model No.: ET-PKD120H (for High Ceilings), ET-PKD120S (for Low Ceilings), ET-PKE301B (Projector

Mount Bracket) f Attach the drop-prevention set that comes with the Ceiling Mount Bracket to the projector. If you need the dropprevention set (Service Model No.: DPPW1004ZA/X1) is necessary, consult your dealer.

f When the projector is mounted to the existing Ceiling Mount Bracket (in combination with the Model No.:

ET-PKD120H (for High Ceilings) or ET-PKD120S (for Low Ceilings), and the Model No.: ET-PKE300B (Projector

Mount Bracket)), it is necessary to replace the drop-prevention wire rope with the one corresponding to this projector. Consult your dealer.

Drop-prevention set (service model no.: DPPW1004ZA/X1) f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.

f Panasonic Connect Co., Ltd. takes no responsibility for any damage to the projector resulting from use of the

Ceiling Mount Bracket not manufactured by Panasonic Connect Co., Ltd. or the inappropriate choice of location for installing the Ceiling Mount Bracket, even if the warranty period of the projector has not expired.

f Unused products must be removed promptly by a qualified technician.

f

Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or impact screwdrivers.

f Read the Installation Instructions of the Ceiling Mount Bracket for details.

f The model numbers of accessories and optional accessories are subject to change without prior notice.

ENGLISH - 203

Chapter 7   Appendix — Specifications r

Specification for the screw holes to fix the projector (projector bottom view)

Unit: mm (inch)

Screw hole for wire rope

M6

Screw holes for ceiling mount

12 mm (15/32") r

Dimensions for the screw holes to fix the projector (projector bottom view)

Unit: mm (inch)

69 (2-23/32")

100 (3-15/16")

354 (13-15/16")

371 (14-19/32")

476 (18-3/4")

204 - ENGLISH

4096 x 2160/50p

640 x 480/60

1024 x 768/50

1024 x 768/60

1280 x 800/50

1280 x 800/60

1280 x 1024/50

1280 x 1024/60

1366 x 768/50

1366 x 768/60

1400 x 1050/50

1400 x 1050/60

1440 x 900/50

1440 x 900/60

1600 x 900/50

1600 x 900/60

1600 x 1200/50

1600 x 1200/60

Signal name

(SIGNAL FORMAT)

480/60p

576/50p

720/60p

720/50p

1080/60i

1080/50i

1080/24p

1080/24sF

1080/25p

1080/30p

1080/60p

1080/50p

3840 x 2160/24p

3840 x 2160/25p

3840 x 2160/30p

3840 x 2160/60p

Chapter 7   Appendix — Specifications

List of compatible signals

The following table specifies the video signals compatible with the projector.

This signal with l

in the supported signal column is supported.

f The content of the compatible signal column is as follows.

g COMPUTER: COMPUTER input g HDMI: HDMI1/HDMI2/HDMI3 input g DIGITAL LINK: DIGITAL LINK input

3840 x 2160/50p

4096 x 2160/24p

4096 x 2160/25p

4096 x 2160/30p

4096 x 2160/60p

Resolution

(Dots)

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

640 x 480

1 024 x 768

1 024 x 768

1 280 x 800

1 280 x 800

1 280 x 1 024

1 280 x 1 024

720 x 480

720 x 576

1 280 x 720

1 280 x 720

1 920 x 1 080i

1 920 x 1 080i

1 920 x 1 080

1 920 x 1 080i

1 920 x 1 080

1 920 x 1 080

1 920 x 1 080

1 920 x 1 080

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

1 366 x 768

1 366 x 768

1 400 x 1 050

1 400 x 1 050

1 440 x 900

1 440 x 900

1 600 x 900

1 600 x 900

1 600 x 1 200

1 600 x 1 200

Dot clock

freq. (MHz)

594.0

25.2

51.9

65.0

68.0

83.5

88.0

108.0

594.0

297.0

594.0

297.0

297.0

297.0

297.0

594.0

297.0

69.0

85.5

99.9

122.6

86.8

106.5

96.5

119.0

131.5

162.0

74.3

74.3

148.5

148.5

297.0

297.0

297.0

297.0

27.0

27.0

74.3

74.3

74.3

74.3

74.3

74.3

41.3

49.7

52.4

64.0

39.6

47.7

54.1

65.2

67.5

135.0

135.0

112.5

112.5

31.5

39.6

48.4

27.0

27.0

28.1

33.8

67.5

56.3

54.0

56.3

Scanning freq.

Horizontal

(kHz)

Vertical

(Hz)

31.5

31.3

59.9

50.0

45.0

37.5

33.8

28.1

60.0

*2

50.0

60.0

*2

50.0

24.0

*2

48.0

*2

25.0

30.0

*2

60.0

*2

50.0

24.0

*2

25.0

30.0

*2

60.0

*2

67.5

135.0

135.0

112.5

112.5

54.0

56.3

60.0

50.0

50.0

24.0

*2

25.0

*2

46.3

55.9

46.4

55.9

61.8

75.0

30.0

*2

60.0

*2

60.0

*2

50.0

50.0

59.9

50.0

60.0

50.0

59.8

50.0

60.0

49.9

59.8

50.0

60.0

49.9

59.9

49.9

60.0

49.9

60.0

COMPUTER

Compatible signal

HDMI DIGITAL LINK l l l l l l l l l l l l l l l l l l l l l l l l l l l

― l l l l l l l l l l l l l l l l l l l l l *3

― l *3

― l l l l

*3

― l

*3

― l l l l l l l l l l l l l l l l l l *3 l l *3 l l l l l l l l l

*3 l l

*3 l l l l l l l l l l l l l l l l l l l l l l l l l l

ENGLISH - 205

Chapter 7   Appendix — Specifications

Signal name

(SIGNAL FORMAT)

1680 x 1050/50

1680 x 1050/60

1920 x 1200/50

1920 x 1200/60RB

Resolution

(Dots)

1 680 x 1 050

1 680 x 1 050

1 920 x 1 200

1 920 x 1 200 *1

Scanning freq.

Horizontal

(kHz)

54.1

Vertical

(Hz)

50.0

65.3

61.8

74.0

60.0

49.9

60.0

Dot clock

freq. (MHz)

119.5

146.3

158.3

154.0

COMPUTER l l l l

Compatible signal

HDMI l l l l

DIGITAL LINK l l l l

*1 VESA CVT-RB (Reduced Blanking)-compliant

*2 The signal with 1/1.001x vertical scanning frequency is also supported.

*3 YP

B

P

R

4:2:0 format only

Note f

A signal with a different resolution is converted to the number of display dots. The number of display dots is as follows.

g

1 920 x 1 200 f

The “i” at the end of the resolution indicates an interlaced signal.

f

When interlaced signals are connected, flickering may occur on the projected image.

f

When the DIGITAL LINK connection is made with the long-reach communication method, the signal that the projector can receive is up to

1080/60p (1 920 x 1 080 dots, dot clock frequency 148.5 MHz).

f

Even if it is the signal listed in the list of compatible signals, it may not be displayed by the projector if the video signal is recorded in a special format.

List of plug and play compatible signals

The following table specifies the video signals compatible with plug and play.

Signal with l in the plug and play compatible signal column is the signal described in the EDID (extended display identification data) of the projector. For the signal without l in the plug and play compatible signal column, the resolution may not be selected on the computer even if the projector is supporting it.

f Input corresponding to each item in the plug and play compatible signal column is as follows.

g

COMPUTER: COMPUTER input g HDMI: HDMI1/HDMI2/HDMI3 input g DIGITAL LINK: DIGITAL LINK input

480/60p

576/50p

720/60p

720/50p

1080/60i

1080/50i

1080/24p

1080/24sF

1080/25p

1080/30p

1080/60p

1080/50p

3840 x 2160/24p

3840 x 2160/25p

3840 x 2160/30p

3840 x 2160/60p

Signal name

(SIGNAL FORMAT)

3840 x 2160/50p

4096 x 2160/24p

4096 x 2160/25p

4096 x 2160/30p

Resolution

(Dots)

720 x 480

720 x 576

1 280 x 720

1 280 x 720

1 920 x 1 080i

1 920 x 1 080i

1 920 x 1 080

1 920 x 1 080i

1 920 x 1 080

1 920 x 1 080

1 920 x 1 080

1 920 x 1 080

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

3 840 x 2 160

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

Scanning freq.

Horizontal

(kHz)

Vertical

(Hz)

28.1

33.8

67.5

56.3

54.0

56.3

67.5

135.0

31.5

31.3

45.0

37.5

33.8

28.1

27.0

27.0

135.0

112.5

112.5

54.0

56.3

67.5

25.0

30.0

*2

60.0

*2

50.0

24.0

*2

25.0

30.0

*2

60.0

*2

60.0

*2

50.0

50.0

24.0

*2

25.0

30.0

*2

59.9

50.0

60.0

*2

50.0

60.0

*2

50.0

24.0

*2

48.0

*2

Dot clock

freq.

(MHz)

74.3

74.3

148.5

148.5

297.0

297.0

297.0

297.0

27.0

27.0

74.3

74.3

74.3

74.3

74.3

74.3

594.0

297.0

594.0

297.0

297.0

297.0

COMPUTER

Plug and play compatible signal

HDMI DIGITAL LINK l l

― l l l l l l l l l l l l l l

*3 l l

*3 l l l l

4K/60P 4K/30P 2K 4K/60P 4K/30P 2K l l l l l l l l l l l l l l l l l l l l l l

― l l l l l

― l l l l l

― l l l l l

― l l l l l

― l l l l l

― l l l l

― l l l

― l l

― l l l l l l l l l l

*3

― l

*3

― l l l l l l l

206 - ENGLISH

Chapter 7   Appendix — Specifications

Signal name

(SIGNAL FORMAT)

Resolution

(Dots)

Scanning freq.

Horizontal

(kHz)

Vertical

(Hz)

Dot clock

freq.

(MHz)

COMPUTER

Plug and play compatible signal

HDMI DIGITAL LINK

4096 x 2160/60p

4096 x 2160/50p

640 x 480/60

1024 x 768/50

1024 x 768/60

1280 x 800/50

1280 x 800/60

1280 x 1024/50

1280 x 1024/60

1366 x 768/50

1366 x 768/60

1400 x 1050/50

1400 x 1050/60

1440 x 900/50

1440 x 900/60

1600 x 900/50

1600 x 900/60

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

4 096 x 2 160

640 x 480

1 024 x 768

1 024 x 768

1 280 x 800

1 280 x 800

1 280 x 1 024

1 280 x 1 024

1 366 x 768

1 366 x 768

1 400 x 1 050

1 400 x 1 050

1 440 x 900

1 440 x 900

1 600 x 900

1 600 x 900

1600 x 1200/50

1600 x 1200/60

1680 x 1050/50

1680 x 1050/60

1 600 x 1 200

1 600 x 1 200

1 680 x 1 050

1 680 x 1 050

1920 x 1200/50 1 920 x 1 200

1920 x 1200/60RB 1 920 x 1 200 *1

41.3

49.7

52.4

64.0

39.6

47.7

54.1

65.2

135.0

135.0

112.5

112.5

31.5

39.6

48.4

46.3

55.9

46.4

55.9

61.8

75.0

54.1

65.3

61.8

74.0

49.9

60.0

50.0

60.0

49.9

60.0

49.9

59.8

50.0

60.0

49.9

59.9

49.9

60.0

60.0

*2

60.0

*2

50.0

50.0

59.9

50.0

60.0

50.0

59.8

50.0

60.0 l

― l l

― l

― l

― l

68.0

83.5

88.0

108.0

69.0

85.5

99.9

122.6

297.0

594.0

297.0

594.0

25.2

51.9

65.0

86.8

106.5

96.5

119.0

131.5

162.0

119.5

146.3

158.3

154.0

l

― l l

― l

― l

4K/60P 4K/30P 2K 4K/60P 4K/30P 2K l

*3 ― ― l

*3 ― ― l l l

*3

― l

*3

― l

― l

― l

― l

― l

― l

― l

― l

― l

― l

― l

― l

― l

― l

― l l

― l

― l

― l l

― l

― l

― l l

― l l

― l

― l

― l l

― l

*1 VESA CVT-RB (Reduced Blanking)-compliant

*2 The signal with 1/1.001x vertical scanning frequency is also supported.

*3 YP

B

P

R

4:2:0 format only

Note f

A signal with a different resolution is converted to the number of display dots. The number of display dots is as follows.

g

1 920 x 1 200 f

The “i” at the end of the resolution indicates an interlaced signal.

f

When interlaced signals are connected, flickering may occur on the projected image.

f

When the DIGITAL LINK connection is made with the long-reach communication method, the signal that the projector can receive is up to

1080/60p (1 920 x 1 080 dots, dot clock frequency 148.5 MHz).

f

Even if it is the signal listed in the list of compatible signals, it may not be displayed by the projector if the video signal is recorded in a special format.

ENGLISH - 207

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents