Home Decorators Collection SP6975 is a versatile Infrared Wall Mount Electric Fireplace that can be installed on a wall or used as a freestanding unit. It features remote control operation, adjustable heat settings, and realistic flame effects that create a cozy and inviting ambiance. With its energy-efficient LED technology, the SP6975 provides supplemental heat while saving on energy costs. Its compact design makes it suitable for various room sizes, and the included decorative crystals and logs add a touch of elegance to any décor.
advertisement
Operation (continued)
5
Adjusting the Flame and the
Emberbed Colors
□ colors.
□ settings: C5, C4, C3, C2 and C1.
Setting
C1
C2
C3
C4
C5
Flame Color
Blue
Yellow + Red + Blue fading
Yellow + Red
Yellow + Red + Blue fading
Yellow + Red + Blue
Emberbed Color
Blue
Red + Blue fading
Red
Red
Red + Blue
6
Using the Child Lock feature
□ When the unit is ON, hold the Lock button on the control panel for 3 seconds to activate the Child Lock function. E3 will locked, and E3 will display when adjusting the temperature setting.
□ To deactivate the Child Lock function, hold the Lock button for
3 seconds.
16
FCC/IC Information
Please read and understand this entire manual before attempting to assemble, operate or install the product.
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures:
□ Reorient or relocate the receiving antenna
□ Increase the separation between the equipment and the receiver
□ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Care and Maintenance
□ Make sure the unit is turned OFF, unplugged and the heating elements of the heater are cool whenever you are cleaning the heater.
□ Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
□ lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/output vents is recommended.
□ Any other servicing should be performed by an authorized service representative.
WARNING: Disconnect power before attempting any WARNING: Make sure the power is turned off before proceeding. Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes.
shock or personal injury.
WARNING: If repairing or replacing an electrical component or wiring, the original wire routing, color coding and securing locations must be followed.
WARNING: During any service of this appliance, the power to the unit must be turned off. First turn the main power switch to the “OFF” position. Then remove the electrical plug from the wall outlet.
WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce
WARNING: the electrical system.
17 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Care and Maintenance (continued)
NOTE: When the heater is not in use, the heater should be stored in a dry location, away from possible damage.
The power cord should be stored properly to avoid contact with hot or sharp objects.
Replacing the Remote Control Battery
When the remote control stops operating or its range seems reduced, it is time to replace the batteries.
1. The battery compartment is located on the back end of the remote control.
2. Press the small tab inward as you slide the battery door open and remove the old battery. The unit uses 2 x AAA alkaline batteris (included).
3. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad, Ni-Mh, etc.) batteries.
4. Re-insert the battery door.
NOTE: The batteries should be removed if the product is to be left unused for a long time.
CAUTION: Do not attempt to re-charge a non-rechargable battery. Remove the drained battery from the remote control.
Disposal of a Used Battery
A battery may contain hazardous substances that could endanger the environment and human health.
□ This symbol marked on the battery and/or packaging indicates that a used battery shall not be treated as municipal waste. Instead it shall be left at the appropriate collection point for recycling.
□ By ensuring the used battery is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The recycling of materials will help to conserve natural resources.
For more information about collection and recycling of used batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased this item.
18
advertisement