advertisement
Cable Assemblies
Oil Switch Base Cable w/
Mil-Spec Connector
CP-0226 -
Length
120=120”
480=480”
- PNC
3-conductor 14 AWG cable x 120” or 480” long with female Mil-Spec connector on juction box end.
Transformer Cable w/
Mil-Spec Connector
CP-0125-PNC
2-conductor 12 AWG cable x 10’-6” long with female Mil-Spec connector on junction box end.
For use with transformer 120V secondary power supply.
4/7/15
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U3-21
Cable Assemblies
Lindsey Sensor Cable w/
Mil-Spec Connectors
CP-1157-PNC
2-conductor 16 AWG cable x 25’-0” long with male and female Mil-Spec connectors. For use with Lindsey Sensor and Junction Box wired for Lindsey or Fisher Pierce Sensors.
Lindsey Sensor Cable w/
Mil-Spec Connectors
CP-0121-PNC
2-conductor 16 AWG cable x 20’-6” long with male and female Mil-Spec connectors. For use with Lindsey Sensor and Junction Box wired for Lindsey Sensor only.
Page U3-22 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Cable Assemblies
Lindsey Sensor Cable w/
Mil-Spec Connectors
CP-0193-PNC
4-conductor 16 AWG cable x 20’-6” long with male Mil-Spec connectors. For use with Lindsey
Sensor.
Lindsey Base Cable w/
Mil-Spec Connector
Length
CP-1231 - - PNC
180=180”
2-conductor 16 AWG cable x 180” long with male Mil-Spec connector on junction box end.
4/7/15
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U3-23
Cable Assemblies
Fisher-Pierce Sensor Cable w/
Mil-Spec Connectors
CP-0145-PNC
3-conductor 16 AWG cable x 25’ long with male and female Mil-Spec connectors. For use with
Fisher-Pierce Sensor.
Fisher-Pierce Sensor Cable w/
Mil-Spec Connector
CP-0192-PNC
3-conductor 16 AWG cable x 25’ long with male
Mil-Spec connector on junction box end. For use with Fisher-Pierce Sensor.
Page U3-24 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Cable Assemblies
Meter Base Cable w/
Mil-Spec Connectors for
J61 & J62 Wiring Configuration
CP-0124-PNC
7-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For use with J61 and J62 wiring configuration.
Meter Base Cable w/
Mil-Spec Connectors for
J40 Wiring Configuration
CP-0204-PNC
5-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For use with J40 wiring configuration.
4/7/15
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U3-25
Cable Assemblies
Meter Base Cable w/
Mil-Spec Connector
CP-0195-PNC
7-conductor 12 AWG cable x 30’ long with male and female Mil-Spec connector on junction box end.
Meter Base Cable w/
Mil-Spec Connectors
CP-0191-PNC
7-conductor 12 AWG cable x 35’ long with female Mil-Spec connectors both ends and protective cap one end. For connecting junction box to meter.
Page U3-26 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Cable Assemblies
Meter Base Cable w/
Mil-Spec Connectors
Non-Standard Wiring
CP-0179-PNC
7-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For connecting junction box to meter with nonstandard special pin arrangement.
Reclosure Box Cable w/
Mil-Spec Connectors
CP-0215-PNC
8-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For connecting reclosure box to meter.
4/7/15
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U3-27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
