advertisement
Traditional Roadway Poles
Pole
Height
22’-6”
25’-0”
30’-0”
Arm
Length
8’-0”
8’-0”
8’-0”
Arm
Twin
Twin
Twin
Part
Number
AP-8490
AP-8563
AP-8302
Allowable EPA
(ft^2) per arm at
90 mph with max. luminaire weight of
60 lbs
5.0
4.8
4.6
Allowable EPA
(ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
3.9
3.8
3.6
Note:
Bolt/Nut Covers are available by specifying -BC in the part number, i.e., AP-8302-BC-P59
EPA=Projected area of luminaire multiplied by coefficient of drag
Compliant with AASHTO 2013
3” x 5”
Hand Hole w/ Cover
11”-12”
Bolt Circle
15”
12”
Anchors:
Aluminum Bases:
PB-5384-7.69
Rochester
AP-1007-3-GLV
Anchor Bolts
Set, 1”-8NC
AP-3129-GLV
Anchor Bolt Cage,
1”-8NC
PB-5372-GLV
6” Foundation
Anchor
AP-0802-7.75
Ornamental
AP-0816-7.75
Hamilton
AP-0817-8.00
Oxford
Note: 1. See Reference Section for available paint colors.
2. For more indepth information on Bases see page U6-25 through U6-29.
3. For Anchors see section U5.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
12/21/16
Page U6-23
Simplex Roadway Poles
3” x 5”
Hand Hole w/ Cover
11”-12” BC
(25’ & 30’ Poles)
12”-13” BC
(35’ & 40’ Poles)
15”
12”
(25’ & 30’ Poles)
13”
(35’ & 40’ Poles)
Aluminum Bases:
Pole
Height
25’
30’
35’
40’
Base
ID
7.25”
8.13”
8.13”
8.63”
Pole
Height
25’-0”
30’-0”
35’-0”
40’-0”
Arm
Length
6’-0”
8’-0”
6’-0”
8’-0”
6’-0”
8’-0”
6’-0”
8’-0”
Arm
Single
Single
Single
Single
Single
Single
Single
Single
Part
Number
AP-8571-25-6
AP-8571-25-8
AP-8571-30-6
AP-8571-30-8
AP-8571-35-6
AP-8571-35-8
AP-8571-40-6
AP-8571-40-8
Allowable EPA
(ft^2) per arm at
90 mph with max. luminaire weight of
60 lbs
6.8
4.1
6.1
4.0
4.5
6.5
4.3
6.3
Note:
Bolt/Nut Covers are available by specifying -BC in the part number, i.e., AP-8571-30-6-BC-GLV.
EPA=Projected area of luminaire multiplied by coefficient of drag
Compliant with AASHTO 2013
Allowable EPA
(ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
5.4
3.2
4.8
3.1
3.5
5.2
3.3
5.0
Anchors:
AP-1007-3-GLV
1”-8NC
(25’ & 30’ Poles)
AP-1020-GLV
1-1/4”-7NC
(35’ & 40’ Poles)
Pole
Height
25’
30’
35’
40’
Base
ID
7.25”
8.25”
8.25”
8.75”
AP-3129-GLV
1”-8NC
(25’ & 30’ Poles)
AP-3146-GLV
1-1/4”-7NC
(35’ & 40’ Poles)
PB-5372-GLV
6” Foundation
Anchor
(25’, 30’, 35’, & 40’ Poles)
Pole
Height
25’
30’
35’
40’
Base
ID
7.31”
7.88”
N/A
N/A
Pole
Height
25’
30’
35’
40’
Base
ID
7.50”
8.44”
8.44”
9.00”
PB-5384 Rochester
AP-0802 Ornamental
AP-0816 Hamilton AP-0817 Oxford
The Simplex Roadway Luminaire Poles are available in 25’, 30’, 35’, and 40’ heights. They are provided with either 6’ or 8’ single or twin arms fabricated with a 24” rise. The steel tapered poles can accept a variety of decorative bases or be provided with simple nut covers. Various anchor options are also available.
Note: 1. See Reference Section for available paint colors.
2. For more indepth information on Bases see page U6-25 through U6-29.
3. For Anchors see section U5.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U6-24
12/21/16
Simplex Roadway Poles
3” x 5”
Hand Hole w/ Cover
Pole
Height
25’-0”
30’-0”
35’-0”
40’-0”
Arm
Length
6’-0”
8’-0”
6’-0”
8’-0”
6’-0”
8’-0”
6’-0”
8’-0”
Arm
Twin
Twin
Twin
Twin
Twin
Twin
Twin
Twin
Part
Number
AP-8572-25-6
AP-8572-25-8
AP-8572-30-6
AP-8572-30-8
AP-8572-35-6
AP-8572-35-8
AP-8572-40-6
AP-8572-40-8
Allowable EPA
(ft^2) per arm at
90 mph with max. luminaire weight of
60 lbs
6.8
4.1
6.1
4.0
4.5
6.5
4.3
6.3
Note:
Bolt/Nut Covers are available by specifying -BC in the part number, i.e., AP-8572-30-6-BC-GLV.
EPA=Projected area of luminaire multiplied by coefficient of drag
Compliant with AASHTO 2013
Allowable EPA
(ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
5.4
3.2
4.8
3.1
3.5
5.2
3.3
5.0
Anchors:
11”-12” BC
(25’ & 30’ Poles)
12”-13” BC
(35’ & 40’ Poles)
15”
12”
(25’ & 30’ Poles)
13”
(35’ & 40’ Poles)
Aluminum Bases:
Pole
Height
25’
30’
35’
40’
Base
ID
7.25”
8.13”
8.13”
8.63”
AP-1007-3-GLV
1”-8NC
(25’ & 30’ Poles)
AP-1020-GLV
1-1/4”-7NC
(35’ & 40’ Poles)
Pole
Height
25’
30’
35’
40’
Base
ID
7.25”
8.25”
8.25”
8.75”
AP-3129-GLV
1”-8NC
(25’ & 30’ Poles)
AP-3146-GLV
1-1/4”-7NC
(35’ & 40’ Poles)
PB-5372-GLV
6” Foundation
Anchor
(25’, 30’, 35’, & 40’ Poles)
Pole
Height
25’
30’
35’
40’
Base
ID
7.31”
7.88”
N/A
N/A
Pole
Height
25’
30’
35’
40’
Base
ID
7.50”
8.44”
8.44”
9.00”
PB-5384 Rochester
AP-0802 Ornamental
AP-0816 Hamilton AP-0817 Oxford
Note: 1. See Reference Section for available paint colors.
2. For more indepth information on Bases see page U6-25 through U6-29.
3. For Anchors see section U5.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
12/21/16
Page U6-24a
This page is intentionally left blank.
Page U6-24b www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
ABS Plastic Bases
Old Town I Base Assy, Black ABS Plastic
25” High x 9-1/4” Points
Top ID
AP-0804 -
3.5=3-1/2”
-
Bottom ID
7.5=7-1/2”
- PNC
Note: Top Opening: 3-1/2” max
Bottom Opening: 7-1/2” max
Rochester I Base Assy, Black ABS Plastic
41” High x 15-11/16” Across Points
Top ID
AP-0803 -
5.75=5-3/4”
Bottom ID
-
12.0=12”
- PNC
Note: Top Opening: 5-3/4” max
Bottom Opening: 12” max
Rochester II Base Assy, Black ABS Plastic
41” High x 19” Across Points
Top ID
AP-0809 -
9.0=9”
-
Bottom ID
15.0=15”
- PNC
Note: Top Opening: 9” max
Bottom Opening: 15” max
Hamilton Base Assy, Black ABS Plastic
21” High x 16-1/8” Base Dia
Top ID
AP-0810 -
6.5= 6-1/2”
-
Bottom ID
- PNC
14.5= 14-1/2”
Note: Top Opening: 6-1/2” max
Bottom Opening: 14-1/2” max
Note: 1. Refer to individual pole pages for cross reference for proper fit of base and pole.
2. ABS Plastic Bases are manufactured from an ultraviolet inhibited material that provides protections against U.V. degradation
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Page U6-25
Aluminum Bases
Old Town I Base Assy, Alum
23-1/2” High x 9-1/4” Across Points
Base ID
AP-0801 -
2.38=2-3/8”
2.88”=2-7/8”
3.5=3-1/2”
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 2-3/8” min to 3-1/2” max
Bottom Opening: 7-1/2” max
Old Town II Base Assy w/ Riser, Alum
28-1/2” High x 14-5/8” Across Points
Base ID
AP-0807 -
2.38=2-3/8”
2.88”=2-7/8”
3.5=3-1/2”
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 2-3/8” min to 3-1/2” max
Bottom Opening: 13” max
Country Club Base Assy, Alum
28” High x 13-5/8” OD
Base ID
AP-0811 -
3.5=3-1/2”
4.5=4-1/2”
3F= 3” Fluted
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 3-1/2” min to 4-1/2” max
Bottom Opening: 12” max
Oxford Base Assy, Alum
9” High x 19-1/4” Across Points
Base ID
AP-0817 -
8.5= 8-1/2”
4F=4” Fluted
6F=6” Fluted
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 3-1/2” min to 8-1/2” max
Bottom Opening: 17” max
Note: 1. See Reference Section for available paint colors.
2. Refer to individual pole pages for cross reference for proper fit of base and pole.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U6-26
4/7/15
Aluminum Bases
Huntington Base Assy, Alum
15-3/4” High x 11-1/4” OD
Base ID
AP-0820 -
3.5=3-1/2”
4.0=4”
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 3” min to 4” max
Bottom Opening: 10-3/4” max
Manchester Base Assy w/ Door, Alum
27” High x 18-1/2” OD
Base ID
AP-0819 -
4.0=4”
7.0=7”
4F=4” Fluted
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 3” min to 4” max
Bottom Opening: 7” max
LeGrande Base Assy, Alum
38” High x 18-1/2” OD
AP-0814 -
Base ID
3.5=3-1/2”
4.5=4-1/2”
5.5=5-1/2”
3F= 3” Fluted
4F=4” Fluted
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 3-1/2” min to 5-3/4” max
Bottom Opening: 17” max
Note: 1. See Reference Section for available paint colors.
2. Refer to individual pole pages for cross reference for proper fit of base and pole.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Page U6-27
Aluminum Bases
Hamilton Base Assy, Alum
24” High x 18-1/2” OD
Base ID Coating
AP-0816 - -
4.06=4-1/16”
4.5=4-1/2”
5.5=5-1/2”
8.5=8-1/2” (max)
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 4” min to 8-1/2” max
Bottom Opening: 16-3/4” max
Hamilton Base Assy, Alum
31-1/4” High x 18-1/2” OD
Base ID
AP-0823 -
4.06=4-1/16”
-
Coating
4.5=4-1/2”
5.5=5-1/2”
8.5=8-1/2” (max)
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 4” min to 8-1/2” max
Bottom Opening: 16-3/4” max
Octagonal Base Assy, Alum
14-3/16” High x 17-13/16” Across Points
Base ID
2.88=2-7/8”
Coating
PB-5416 - -
PNC=Process No Color
3.5=3-1/2”
4=4”
P_ _=Paint
4.5=4-1/2”
5= 5”
Note: Top Opening: 2-7/8” min to 5” max
Bottom Opening: 16” max
Octagonal Base Assy, for 4” Fluted Pole, Alum
14” High x 17-13/16” Across Points
Coating
PB-5414 -
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 4” Fluted Only
Bottom Opening: 16” max
Note: 1. See Reference Section for available paint colors.
2. Refer to individual pole pages for cross reference for proper fit of base and pole.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U6-28
4/7/15
Aluminum Bases
Rochester Base Assy, Alum
36” High x 28” Across Points
Base ID
PB-5384 -
8.0=8”
10.63=10-5/8”
14.13=14-1/8”
16”= 16”
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 8” min to 16” max
Bottom Opening: 26” max
Ornamental Base Assy, Alum
32” High x 28-3/4” Across Points
Base ID
AP-0802 -
8.0=8”
10.0=10”
12.0= 12”
Trim
- -
T_ _=Trim Color
Coating
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 6” min to 12” max
Bottom Opening: 23” max
Square Cover Assy, 2-Piece, Alum
5-1/4” High x 16” Square
PB-5399 -
Base ID
4.5=4-1/2”
6.8=6-13/16”
7.5=7-1/2”
8.0=8-1/2”
Coating
-
PNC=Process No Color
P_ _=Paint
Note: Top Opening: 4-1/2” min to 8-5/8” max
Bottom Opening: 15” max
Note: 1. See Reference Section for available paint colors.
2. Refer to individual pole pages for cross reference for proper fit of base and pole.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Page U6-29
This page is intentionally left blank.
Page U6-30 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Banner Brackets
3” Ball Steeple Spire Fleur Spear
Banner Mounting Bracket, Alum
Hinged Single Arm,
Pole Dia
SH-3551 -
2.38=2-3/8”
2.88=2-7/8”
3.50=3-1/2”
4.06=3” Fluted
4.50=4-1/2”
5.08=4” Fluted
5.56=5-9/16”
-
Banner Width
-
18=18”
24=24”
30=30”
36=36”
Finial/Color
-
Coating
BL_ _=2” Ball
ST_ _=Steeple
SI_ _=Spire
FL_ _=Fleur
SE_ _=1-1/2” Spear
P_ _=Paint
Note:
Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.
3” Ball Steeple Spire Fleur Spear
Banner Mounting Bracket, Alum
Hinged Articulating Single Arm
Pole Dia
SH-3547 -
2.38=2-3/8”
2.88=2-7/8”
3.50=3-1/2”
4.06=3” Fluted
4.50=4-1/2”
5.08=4” Fluted
5.56=5-9/16”
-
Banner Width
-
18=18”
24=24”
30=30”
36=36”
Finial/Color
-
Coating
BL_ _=2” Ball
ST_ _=Steeple
SI_ _=Spire
FL_ _=Fleur
SE_ _=1-1/2” Spear
P_ _=Paint
Note:
Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.
3” Ball Steeple Spire Fleur Spear
Note: 1. See Reference Section for available paint colors.
Banner Mounting Bracket, Alum
Hinged Double Arm
SH-3556 -
Pole Dia
2.38=2-3/8”
2.88=2-7/8”
3.50=3-1/2”
4.06=3” Fluted
4.50=4-1/2”
5.08=4” Fluted
5.56=5-9/16”
-
Banner Width
18=18”
24=24”
30=30”
36=36”
-
Banner Width
18=18”
20=21”
24=24”
30=30”
36=36”
-
Finial/Color Coating
-
BL_ _=2” Ball
ST_ _=Steeple
SI_ _=Spire
P_ _=Paint
FL_ _=Fleur
SE_ _=1-1/2” Spear
Note:
Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Page U6-31
Banner Brackets
3” Ball Steeple Spire Fleur Spear
Banner Mounting Bracket, Alum
Band Mini-Brac
Banner Width
SH-3520 -
18=18”
24=24”
30=30”
36=36”
BandLength/Painted
- -
29=29”
42=42”
29PB=29” Painted
42PB=42” Painted
Finial/Color
-
BL_ _=2” Ball
ST_ _=Steeple
SI_ _=Spire
FL_ _=Fleur
SE_ _=1-1/2” Spear
Coating
P_ _=Paint
Note:
Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.
Banner Mounting Bracket, Alum
Band Mini-Brac, Articulating Arm
3” Ball Steeple Spire Fleur Spear
Banner Width
SH-3525 -
18=18”
24=24”
30=30”
36=36”
BandLength/Painted
- -
29=29”
42=42”
29PB=29” Painted
42PB=42” Painted
Finial/Color
-
BL_ _=2” Ball
ST_ _=Steeple
SI_ _=Spire
FL_ _=Fleur
SE_ _=1-1/2” Spear
Coating
P_ _=Paint
Note:
Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.
Pelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole.
Note: 1. See Reference Section for available paint colors.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U6-32
4/7/15
Banner Brackets
3” Ball Steeple Spire Fleur Spear
Banner Mounting Bracket, Alum
Universal Hub Mount
Banner Width
SH-3523 -
18=18”
24=24”
30=30”
36=36”
Finial/Color
- -
BL_ _=2” Ball
ST_ _=Steeple
SI_ _=Spire
FL_ _=Fleur
SE_ _=1-1/2” Spear
Coating
P_ _=Paint
Note:
Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.
Banner Mounting Bracket, Alum
For Square Poles, Articulating Arm
3” Ball Steeple Spire Fleur Spear
SH-3532 -
Pole Size
-
Banner Width
-
4=4” Square
5=2-7/8” Square
6.63=6-5/8” Square
18=18”
24=24”
30=30”
36=36”
Finial/Color Coating
-
BL_ _=2” Ball
ST_ _=Steeple
SI_ _=Spire
FL_ _=Fleur
SE_ _=1-1/2” Spear
P_ _=Paint
Note:
Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.
Pelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole.
Note: 1. See Reference Section for available paint colors.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Page U6-33
Flag Mounts
Flag Mount, Hinged Articulating Serrated,
Alum
Pole Dia Coating
SH-3549 - -
2.88=2-7/8”
3.50=3-1/2”
4.06=3” Fluted
4.50=4-1/2”
5.08=4” Fluted
5.56=5-9/16”
P_ _=Paint
Flag Mount, 2-Way Articulating Serrated,
Alum
Pole Dia
SH-3561 - -
2.88=2-7/8”
3.50=3-1/2”
4.06=3” Fluted
4.50=4-1/2”
5.08=4” Fluted
5.56=5-9/16”
Coating
P_ _=Paint
Flag Mount, Articulating Serrrated, Alum
Band Mini-Brac
BandLength/Painted
SH-3539 - -
29=29”
42=42”
29PB=29” Painted
42PB=42” Painted
Coating
P_ _=Paint
Flag Mount w/ Articulating Serated, Alum
Universal Hub
SH-3538 -
Coating
P_ _=Paint
Note: 1. See Reference Section for available paint colors.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
Page U6-34
4/7/15
3” Ball Steeple Spire Fleur Spear
Pole Accessories
Flag Rod Assy, Alum
AP-7380 -
Rod Length
-
Finial/Color Coating
-
42=42”
52=52”
BL_ _=2” Ball
SE_ _=1-1/2” Spear
P_ _=Paint
SI_ _=Spire
ST_ _=Steeple
FL_ _=Fleur
Note:
Shown with steeple finial. Finial may be ordered as P28 Gold or same color as assembly.
Break-a-way Coupler, 1”-8NC, Alum
For Banner Bracs
AP-7239 -
Coating
P_ _=Paint
Pelco’s Break-a-way Coupler can be mounted on any 1” banner rod for collapsing against the pole.
Note: 1. See Reference Section for available paint colors.
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
4/7/15
Page U6-35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
