Cleanup. Jacuzzi SOAKER BATH SERIES

Soaker™ Bath Series

Cleanup

To avoid dulling and scratching the surface of the bathtub, never use abrasive cleaners. For most soiled surfaces, a mild liquid detergent and warm water is sufficient. The following is also recommended:

•

Remove spilled plaster with a wood or plastic edge. Spots left by plaster or grout can be removed if lightly rubbed

with detergent on a damp cloth or sponge. Do not use metal scrapers, wire brushes or other metal tools, as they

•

Paint, tar, or other difficult stains can be removed with Fantastik® or soapy water.

Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry

sandpaper. You can restore the glossy finish to the acrylic surface of the bathtub with a special compound,

Meguiar’s #10 Mirror Glaze. If that is not available, use automotive rubbing compound followed by an application

•

Major scratches and gouges which penetrate the acrylic surface will require refinishing. Call Jacuzzi Luxury Bath

Operation

All bathtubs manufactured by Jacuzzi Luxury Bath are designed for “fill and drain,” which means the bathtub should be drained after each use and filled with fresh water by the next bather. This is a health precaution, as these bathtubs are not designed to hold water continuously like pools or spas.

Chromatherapy (Light) Operation

Press light button 1st time:

Turns colored lighting ON, use up and down buttons to start color scroll or select alternate color.

Press light button 2nd time:

Turns white lighting ON, use up and down buttons to select intensity of white light.

Press light button 3rd time:

Turns all lighting OFF ‘UP’ Arrow Light ‘DOWN’ Arrow

Colored Lighting Operation

The colored lighting default is constant blue. Pressing the (UP) arrow button activates color scroll in this order: blue, teal, green, yellow, orange, red, pink, purple and then returns to blue and continuously repeats. To stop on a selected color, press the (UP) arrow button again. Pressing the (DOWN) arrow button activates color scroll in this order: blue, purple, pink, red, orange, yellow, green, teal and then returns to blue and continuously repeats. To stop on a selected color, press the (DOWN) arrow button again.

White Lighting Operation

There are five white light intensities. Press the (+) button to increase light intensity. Press the (-) button to decrease light intensity. If chromatherapy fails to work:

- reset the GFCI

- ensure the plug is fully in the outlet

- ensure the connectors to the control panel and control box are fully engaged in receptacles

- contact Jacuzzi Luxury Bath if the above does not resolve the issue

Maintenance

Cleaning the Bathtub

To clean your bathtub, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss to a dulled acrylic surface by applying Meguiar’s #10 Mirror Glaze, a product specifically designed for use on acrylic finishes. If Meguiar’s is not available, use a fine grade automotive rubbing compound followed by an application of automotive paste wax.

Never use abrasive household cleaners on any Jacuzzi Luxury Bath product.

Surface Repair

Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry sandpaper. Restore the gloss using Meguiar’s Mirror Glaze or automotive paste wax. Major scratches and gouges which penetrate the acrylic surface will require refinishing. Call Jacuzzi Luxury Bath to find a service agent in your area.

Installation and Operation www.jacuzzi.com

Page 13