PARADOX Esprit 748 express + is a powerful and versatile security system that offers a wide range of features to protect your home or business. With its advanced technology and user-friendly design, the Esprit 748 express + is the perfect choice for anyone looking for a reliable and comprehensive security solution.
advertisement
Panel Settings for Espload
Main Menu
?
Program Setup
?
Modem & Printer Configuration
Set "Dialing Condition" to "Blind Dial". Program the panel telephone number in Espload and follow the instructions on the ADP-1 adapter. When the computer has dialed press:
[ ENTER ] + (Installer, Master, or User 1 Code) + [ AWAY ]
5.7
Cancel Communication
Key Access Programming
?
key [
STAY
]
Use the Installer Code to cancel all communication and erase any unreported events in the buffer until the next reportable event. Use the Master or User 1 code to cancel communication attempts with Espload.
[
ENTER
] + (Installer, Master & User 1 Code) + [
STAY
]
5.8
Call Back
Feature Select Programming
?
Address 086, key [4]
Default: Call Back Disabled
For additional security, when a PC using the Espload software attempts to communicate with the control panel, the control panel can hang-up and call the PC back in order to re-verify identification codes and re-establish communication. When the control panel answers the call, it will verify if the
Panel ID and PC Passwords match and if they do, the control panel will hang-up and call the
Espload software back. The Espload software will automatically go into "wait for dial tone", ready to answer when the control panel calls back. Please note the Computer Telephone Number (see section 5.4) must be programmed in order to use the "Call Back" feature.
Key [4] "Off": Call Back Disabled
Key [4] "On": Call Back Enabled
[
ENTER
] + Installer Code + [10] [8] [6] + [4] On/Off + [
ENTER
] twice
5.9
Automatic Event Buffer Transmission
Feature Select Programming
?
Address 088, key [2 ND ]
Default: Automatic Event Buffer Transmission Disabled
When the event buffer reaches 50% capacity, the control panel will make two attempts to establish communication with a PC. The control panel will call the Computer Telephone Number (see section
5.4) programmed at addresses 008 to 015. The Espload software must be in "wait for dial tone" mode. When the system establishes communication, it will upload the contents of the event buffer to the Espload software. If communication is interrupted before transmission of the complete contents of the buffer, or if after two attempts, communication is not established, the system will wait until the event buffer is full before attempting to re-communicate with Espload. When the Event
Buffer is full, each subsequent new event will erase the oldest event in the buffer.
Key [2
ND
] "Off": Automatic Event Buffer Transmission Disabled
Key [2
ND
] "On": Automatic Event Buffer Transmission Enabled
[
ENTER
] + Installer Code + [10] [8] [8] + [2
ND
] On/Off + [
ENTER
] twice
18
EVENT REPORTING
Event Reporting
19
advertisement
Key Features
- - Supports up to 8 keypads and 32 zones
- - Features 4 programmable outputs (PGM) for controlling external devices
- - Includes a built-in siren output for audible alerts
- - Offers advanced technology zone (ATZ) connections for enhanced security.
- - Supports fire alarm system integration for added protection against fire hazards.
- - Provides serial output connectivity for easy integration with other devices.
- - Delivers remote access and control via Espload software for convenient management.