PGM Timer Setting. PARADOX Esprit 748 express +

PGM (Programmable Output)

9.2

PGM Timer Setting

Decimal Programming

?

Address 056

Default: 5 seconds

You can program the PGM Timer from 1 to 127 seconds or 1 to 127 minutes. The PGM Timer applies to both PGMs. To determine the 3-digit decimal value, do the following:

?

To program seconds, the required time is respective to the decimal value

1 second = 001, 55 seconds = 055, 127 seconds = 127.

?

To program the minutes add the required minutes to 128:

5 minutes: 128 + 5 = 133

127 minutes: 128 +127 = 255

[

ENTER

] + Installer Code + [10] [5] [6] + 3-digit decimal value (001-255) + [

ENTER

]

9.3

PGM Options

Streamline - Section 10

?

Hexa Programming - Addresses 040 to 043

The PGM options define which sequence of events will trigger the PGM. The PGM options are virtually endless. Therefore, to list them in the manual is impractical. Table 8, contains a list of the most commonly used PGM options with the required 2-digit data for each address. If other options are required, you can fax your requests to Paradox Technical Support, you can visit our web site at http://www.paradox.ca. or the 2-digit data can be derived using the Espload Software as follows:

1) From the "Main Menu" select Accounts

2) Select a current Account or create a new one

3) Press the

?

key until page 9 appears

4) Using the arrow keys and space bar select the PGM options, state, logic and type for the PGM

5) Press the

?

key to view the "Hexadecimal Mode". This mode will display the 2-digit data for addresses 039 to 043.

6) Record these numbers and program them into the control panel or use the Espload Software to download the data directly to the control panel.

If you do not have a copy of the Espload Software, you can obtain a FREE copy from your local

Paradox distributor.

40