Ventilation. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

Ventilation. Miele KWT 2671 ViS | Manualzz

*

T

A

N

S

L

L

O

N

*

Ventilation

 Risk of fire and damage due to insufficient ventilation.

If the wine conditioning unit is not ventilated sufficiently, the compressor will run more frequently and for longer periods.

This will result in increased energy consumption and a higher operating temperature for the compressor. This may, in turn, cause damage to the compressor.

Please ensure that there is adequate ventilation around the wine conditioning unit.

It is essential to observe the required ventilation gaps. The ventilation gaps must not be covered or blocked in any way.

Door hinge

 Risk of damage and injury when changing the door hinge.

Changing the door hinge singlehandedly can cause damage to the appliance and injury.

The wine conditioning unit is supplied with fixed hinges. Under no circumstances should you attempt to change the door hinges yourself.

If you need to change the door hinges to the other side, please contact the Customer Service Department.

Side-by-side

This wine conditioning unit can be installed side-by-side with another refrigeration appliance. The following over-

Installation view will show you which side-by-side installation options you have with your wine conditioning unit.

Depending on the installation situation, you will need the side-by-side installation kit for side-by-side installation (see “Optional accessories” in

“Accessories”).

Instructions for installing appliances side-by-side can be found in the sideby-side installation kit installation instructions.

. . . with partition wall

The wall a between the side-by-side wine conditioning units/refrigeration appliances must be at least 16 mm thick.

17

*

T

A

N

S

L

L

O

N

*

Installation

If the door hinges of the appliances are next to each other, you must take into account the thickness of the furniture fronts and door handles so that the appliance doors do not collide and become damaged if they are opened at the same time.

The wine conditioning units/refrigeration appliances are secured individually in their building-in niche using the supplied installation material.

If the partition wall a is narrower than

160 mm , you will need the side panel heater from the side-by-side installation kit to prevent condensation from forming and any resulting damage.

When planning building-in niches, please note that the niche into which the appliance with the side panel heater is installed must be 4 mm wider (see “Installation dimensions” in “Installation”).

. . . without partition wall

If the wine conditioning units/refrigeration appliances are to be installed next to each other without a partition wall between them, they will need to be joined together with the side-by-side installation kit. In addition, you must install the side panel heater to prevent condensation from forming and any resulting damage.

If the partition wall a is thicker than

160 mm , you do not need the side-byside installation kit, nor the side panel heater.

18

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents