Installing the wine conditioning unit. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

Installing the wine conditioning unit. Miele KWT 2671 ViS | Manualzz

*

T

A

N

S

L

L

O

N

*

Installation

Installing the wine conditioning unit

Before starting ...

It is essential to read these operating and installation instructions carefully before starting to install the wine conditioning unit.

The wine conditioning unit should be installed by a suitably qualified installer in accordance with these operating and installation instructions.

Safe operation of the wine conditioning unit is only assured if it has been installed and connected in accordance with these operating and installation instructions.

 Risk of damage and injury from the wine conditioning unit tipping over.

The wine conditioning unit is very heavy and can tip forwards when the appliance door is open.

Keep the appliance door shut until the wine conditioning unit has been built in and secured in its building-in niche in accordance with these operating and installation instructions.

Due to its weight and size, the wine conditioning unit must be installed by two people.

Tools required

– Cordless drill

– TX 20 screwdriver

– Hammer drill

– Drill bits in various sizes, depending on materials

– Hammer

– Open spanner

– Ratchet wrench, attachment: socket,

8 mm

– Adhesive tape

– Utility knife

– Pipe wrench

– Spirit level

– Tape measure

– Pencil

Other

– Step ladder

– Sack truck

23

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents