Preparing the building-in niche. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

Preparing the building-in niche. Miele KWT 2671 ViS | Manualzz

*

T

A

N

S

L

L

O

N

*

Installation

 With the help of several people as required, carefully lift the wine conditioning unit from the pallet, starting with the back of the appliance.

 Risk of damaging the floor from the load.

Moving the wine conditioning unit can cause damage to the floor.

Move the wine conditioning unit carefully on floors that are sensitive to scratching.

 Do not remove the installation aids   from the appliance door. These will be required later for aligning the appliance in the building-in niche.

 Risk of damage and injury from the wine conditioning unit tipping over.

As soon as you unscrew the brackets that fix the wine conditioning unit to the pallet, the appliance is no longer secured.

Due to its weight and size, the wine conditioning unit must be installed by two people .

As soon as you have set the wine conditioning unit upright, you can move it using the rollers on the bottom.

Preparing the building-in niche

 Risk of damage and injury from the wine conditioning unit tipping over.

The wine conditioning unit is very heavy and can tip forwards when the appliance door is open.

The building-in niche must be secured to the wall behind it and/or above it with several screws. Only this can ensure that the wine conditioning unit will not tip over after being installed in the building-in niche.

In addition, use the provided anti-tip brackets to secure the building-in niche.

2

Parts required for installation are supplied with the wine conditioning unit.

The plastic bags supplied are marked with letters for easy identification.

 Unscrew the fixing brackets   .

26

*

T

A

N

S

L

L

O

N

*

 When performing the individual assembly steps, observe the letters specified and use the matching plastic bag with the required installation equipment.

Installation

The anti-tip brackets prevent the wine conditioning unit from tipping.

The anti-tip brackets are also used to fix the building-in niche securely to the surrounding walls.

 Use 2 anti-tip brackets   for each individual appliance or 4 anti-tip brackets for each (side-by-side) combination of 2 appliances.

 Position the anti-tip brackets   on the left and right of the building-in niche.

Depending on the subsequent adjustment of the feet, the anti-tip brackets are positioned 2134–2164 mm from the floor of the niche.

27

*

T

A

N

S

L

L

O

N

*

Installation

 Danger of injury and damage to the appliance due to the wine conditioning unit tipping over.

If the anti-tip brackets are fixed too high up, they cannot be used to secure the wine conditioning unit.

There must not be more than 8 mm between the anti-tip brackets and the wine conditioning unit.

The accessory pack supplied contains fixing screws for various applications/materials.

Securing to a concrete wall

 Make sure that the gap between the wine conditioning unit‘s rear wall and the building-in niche does not exceed

51 mm.

 Place a wooden wedge behind the anti-tip brackets   if necessary.

 While holding the anti-tip brackets in place, mark the necessary drill holes on the rear wall of the building-in niche.

Securing to a wooden wall

28

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents