Preparing to install the furniture fronts. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

Preparing to install the furniture fronts. Miele KWT 2671 ViS | Manualzz

*

T

A

N

S

L

L

O

N

*

 Open the appliance door.

Installation

Preparing to install the furniture fronts

 Open the appliance door as far as it will go.

 Screw the fixing plate lugs   at the top and bottom to the cabinets/units adjacent to the appliance.

In a side-by-side combination, only the external panels of the wine conditioning units/refrigeration appliances can be secured to the adjacent cabinets/units.

 Unscrew the installation aids   from the appliance door.

35

*

T

A

N

S

L

L

O

N

*

Installation

 Unscrew the angle trims   from both sides of the appliance door and place the trims and screws to one side – they will be required later.

 Close the appliance door.

 Measure the gap  X between the mounting frame and the upper edge of the adjacent furniture front.

 Remove the nuts and washers   from the threaded bolts   and store them in a safe place – they will be required later.

 Take the mounting frame   off the appliance door by removing it upwards.

36

*

T

A

N

S

L

L

O

N

*

Installation

 Place the furniture front on a firm surface, with the external side facing downwards (place on a blanket or similar to prevent it from becoming scratched).

 Mark the distance  X -3 mm on the inner side of the furniture front.

 Also locate and mark the centre point  Y on the furniture front.

 Position the mounting frame   according to the markings on the furniture front.

 Pre-drill the holes.

 Secure the mounting frame   to the top of the furniture front, using at least 6 screws.

The mounting frame has several different types of holes to take account of a variety of furniture fronts.

When securing the frame, always screw into the strongest part of the furniture front. To do this, select screws which are slightly shorter than the thickness of the furniture front.

 Screw the appliance handle to the furniture front from the inside if necessary (not for handle-free kitchens).

 Screw the mounting frame   to the furniture front:

Use at least one screw for each retaining point on the mounting frame   .

37

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents