Electrical connection. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

Electrical connection. Miele KWT 2671 ViS | Manualzz

*

T

A

N

S

L

L

O

N

*

Installation

Electrical connection

The wine conditioning unit must only be connected using the connection cable supplied (AC 220–240 V, 50/60 Hz supply). A longer connection cable is available to order from the Miele Customer

Service Department.

The fuse rating must be at least 10 A.

This appliance must be connected to a suitable switched socket. The electrical installation must comply with local and national safety regulations (e.g.

VDE 0100 in Germany, BS 7671 in the

UK).

The socket must not be concealed behind the wine conditioning unit and must be easily accessible so that the appliance can be quickly disconnected from the electrical supply in case of an emergency.

If the socket is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole contact gap of at least 3 mm. These include circuit breakers, fuses and contactors (EN 60335).

The plug and power cable must not touch the rear of the wine conditioning unit as they could be damaged by vibrations from the wine conditioning unit. This could result in a short circuit.

Do not plug in other appliances behind this wine conditioning unit.

Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the wine conditioning unit (e.g. danger of overheating).

Do not connect the wine conditioning unit to a stand-alone inverter such as those used with an autonomous energy source, e.g. solar power .

When the wine conditioning unit is switched on, power surges could result in a safety switch-off. This could damage the electronic module. The wine conditioning unit must not be used with energy-saving devices either. These reduce the amount of energy supplied to the wine conditioning unit, which also overheats.

47

*

T

A

N

S

L

L

O

N

*

Installation

Connecting the wine conditioning unit

 Insert the plug connector into the socket at the back of the wine conditioning unit.

Make sure that the plug connector has clicked into position correctly.

 Insert the plug of the wine conditioning unit into the socket.

The wine conditioning unit is now connected to the electricity supply.

48

Installation /

Maintenance

Temperature setting

Saving energy

Normal energy consumption

In a ventilated room.

Protected from direct sunlight.

Not near to a heat source

(radiator, oven).

Where the ideal ambient room temperature is approx.

20 °C.

Ventilation gaps uncovered and dusted regularly.

10 to 12 °C

Increased energy consumption

In an enclosed, unventilated room.

In direct sunlight.

Near to a heat source (radiator, oven).

Where the ambient room temperature is above 25 °C.

Ventilation gaps covered or dusty.

The lower the temperature, the higher the energy consumption.

49

Saving energy

Use

Normal energy consumption

Wooden shelves arranged as they were when the appliance was delivered.

Only open the door when necessary and for as short a time as possible. Store wine bottles in an organised way.

Do not over-fill the appliance to allow air to circulate.

Increased energy consumption

Frequent opening of the door for long periods will cause a loss of coldness.

The wine conditioning unit works harder to cool down and the compressor runs for longer periods.

Poor air circulation will cause a loss of coldness.

50

Guide to the appliance a Display b On/Off switch c Wooden shelves with labels d Interior lighting e Isolator plate for thermal separation of the wine conditioning zones f SommelierSet* g Glass door with UV filter h Automatic door opening (Push2open/Pull2open)

51

Guide to the appliance

* The SommelierSet consists of:

A glass holder, a bottle holder, 2 accessory boxes and a decanter plate. The

SommelierSet also includes felt inserts in various sizes.

52

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents