on or off. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

 on or off. Miele KWT 2671 ViS | Manualzz

Selecting additional settings

In Settings mode   , you can select different wine conditioning unit functions and alter their settings to some extent, allowing you to adjust the appliance to suit your requirements.

Only the functions in Settings mode   that require further explanation are described below.

The door alarm and other warnings are automatically disabled when the appliance is in Settings mode   .

The display is unlocked briefly so you can adjust the settings as required.

Closing the appliance door will reactivate the sensor lock.

Switching Keypad lock   /

  on or off

Switch Keypad lock on if you wish to protect your wine conditioning unit from unwanted temperature changes or other unintentional adjustments in Settings mode   .

 In Settings mode   , use the   and   sensor controls to select  Keypad lock and select  OK to confirm your selection.

 Use the   and   sensor controls to switch the sensor lock On or Off and select OK to confirm your selection.

 The sensor lock will not be activated until you close the appliance door.

Nothing will appear on the display to indicate that the sensor lock is switched on.

The message Press OK for 6 seconds to unlock will appear on the display if you select a sensor control while the sensor lock is switched on.

 Follow the instructions on the display.

61

Selecting additional settings

Performing a Self test  

Perform a Self test if you are concerned that your wine conditioning unit is not working properly and want to check if it is suffering from any problems.

 In Settings mode   , use the   and   sensor controls to select  Self test and select  OK to confirm your selection.

 Touch the   sensor control if you wish to terminate the process.

The Self test starts and the wine conditioning unit is checked for any faults or malfunctions.

– The message System restart will appear on the display if the self test does not discover any faults or malfunctions.

– If the self test does discover any faults or malfunctions, they are indicated as error messages on the display.

An alarm will also sound.

 If you find the alarm disruptive, you can switch it off in advance by touching the   sensor control.

 Make a note of the error message(s) displayed.

 Contact the Customer Service Department and inform them of the error message(s) on the display.

 Confirm the message with OK .

System restart will appear on the display.

The wine conditioning unit briefly switches off and then back on automatically.

Self test completed will appear on the display.

 Confirm the message with OK .

The main screen will appear on the display again.

Switching on the Door assistant  

You can choose between the two door assistants: Push2open and Pull2open .

The default door assistant is Push2open .

The Push2open door assistant is suitable for furniture fronts without handles. The door opens automatically when you gently press against it.

The Pull2open door assistant is suitable for furniture fronts with handles. The appliance door can be opened easily with little force.

 Risk of damage if the appliance door is closed prematurely.

When the door assistant is switched on, repeatedly closing the appliance door early can lead to damage or malfunctions.

Refrain from holding onto or closing the appliance door while automatic door opening is still extended. However, if you have closed the appliance door, leave it closed for

5 minutes. Automatic door opening resets itself.

62

Selecting additional settings

Switching on Push2open

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 Use the   and   sensor controls to select Mode and select OK to confirm your selection.

 Use the   and   sensor controls to select Push2open and select OK to confirm your selection.

 Touch the   sensor control to return to the previous menu level.

– Adjusting the intensity

You can also adjust the intensity of the

Push2open  function. The lower the set intensity, the less force required when you push against the appliance door.

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 In Settings mode   , use the   and   sensor controls to select  Intensity and select  OK to confirm your selection.

 Use the   and   sensor controls to select the right intensity ( Low , Medium ,

High ) and select OK to confirm your selection.

– Adjusting the duration of the Auto-

Close function

You can also adjust the duration for how long the appliance door will remain open until it closes automatically.

 In Settings mode   , use the   and   sensor controls to select  Door

 assistant and select  OK to confirm your selection.

 In Settings mode   , use the   and   sensor controls to select  Auto-

Close and select  OK to confirm your selection.

Use the tion.

  and   sensor controls to select the duration (5 to 30 seconds) and touch OK to confirm your selec-

To protect against inadvertent opening: if you do not pull the appliance open, it will close again by itself after a duration defined by you.

Switching on Pull2open

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 Use the   and   sensor controls to select Mode and select OK to confirm your selection.

 Use the   and   sensor controls to select Pull2open and select OK to confirm your selection.

 Touch the   sensor control to return to the previous menu level.

63

Selecting additional settings

– Adjusting the intensity

You can also adjust the intensity of the

Pull2open  function. The lower the set intensity, the less force required when you pull the appliance door.

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 In Settings mode   , use the   and   sensor controls to select  Intensity and select  OK to confirm your selection.

 Use the   and   sensor controls to select the right intensity ( Low , Medium ,

High ) and select OK to confirm your selection.

Switching off the Door assistant  

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 Use the   and   sensor controls to select Mode and select OK to confirm your selection.

 Use the   and   sensor controls to select Off and select OK to confirm your selection.

 Touch the   sensor control to return to the previous menu level.

64

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents