Miele@home. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

Miele@home. Miele KWT 2671 ViS | Manualzz

Selecting additional settings

Miele@home

Your wine conditioning unit is equipped with an integrated WiFi module.

Networking is deactivated at the factory.

You will need:

– A WiFi network

– The Miele@mobile app

– A Miele user account The user account can be created via the

Miele@mobile app.

The Miele@mobile app will guide you as you connect your wine conditioning unit to your home WiFi network.

Once your wine conditioning unit is connected to your WiFi network you can use the app to carry out the following activities, for example:

– Call up information on the operating status of your wine conditioning unit

– Change the settings on your wine conditioning unit

Connecting your wine conditioning unit to your WiFi network will increase energy consumption, even when the wine conditioning unit is switched off.

Make sure that the signal of your

WiFi network is sufficiently strong in the place where you want to set up your wine conditioning unit.

Availability of the WiFi connection

The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures.

Therefore, the availability of featured functions cannot be guaranteed.

Miele@home availability

The ability to use the Miele@mobile app depends on the availability of the

Miele@home service in your country.

The Miele@home service is not available in every country.

For information about availability, please visit www.miele.com.

Miele@mobile App

The Miele@mobile App is available to download free of charge from the Apple

App Store

®

or from the Google Play

Store™.

65

Selecting additional settings

Connecting your wine conditioning unit via the Miele@mobile app

You will also require the following to log in:

– Your WiFi network password

– The password for your wine conditioning unit

Your wine conditioning unit‘s password is its serial number, which can be found on the data plate.

The data plate can be found inside the wine conditioning unit.

 As soon as your wine conditioning unit has been integrated into your

WiFi network, the message Connection successful will appear on your wine conditioning unit‘s display.

 Confirm the process with OK again.

If the WiFi connection is active,   will appear on the display.

If your serial number is “78000001”, for example, your password will be

“78000001”.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

Set up will appear on the display.

 Confirm your selection with  OK .

 Use the   and   sensor controls to select via the App and select OK to confirm your selection.

 Open the Miele@mobile app and follow the instructions in the app.

66

Selecting additional settings

Connecting your wine conditioning unit via WPS

Your router must be equipped with the

WPS function for this connection option.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

Set up will appear on the display.

 Confirm your selection with  OK .

 Use the   and   sensor controls to select via WPS and select OK to confirm your selection.

 Now follow the instructions on the display.

 Confirm the process with OK .

To be able to use the Miele@home functions, you also have to register your wine conditioning unit in the app.

 As soon as your wine conditioning unit has been integrated into your home network via WPS, the message

Connection successful will appear on the display.

 Confirm the process with OK again.

If the WiFi connection is active,   will appear on the display.

Deactivating Miele@home

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Deactivate and select OK to confirm your selection.

Deactivation successful will appear on the display.

 Confirm the message with OK .

Your wine conditioning unit is now disconnected from your WiFi network.

The   symbol will go out on the display.

Activating Miele@home

If you have already activated

Miele@home and then disconnected the connection, you will need to reactivate the connection.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Activate and select OK to confirm your selection.

Activation successful will appear on the display.

 Confirm the message with OK .

If the WiFi connection is active,   will appear on the display.

67

Selecting additional settings

Checking the WiFi connection status

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Connection status and select OK to confirm your selection.

Information about the WiFi connection status will then appear on the display:

–   connected: there is a strong connection

–   connected: there is an average connection

–   connected: there is a weak connection

–  : disconnected

Setting up Miele@home again

If you have changed your WiFi network, you can set up Miele@home again for your wine conditioning unit.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Set up again and select OK to confirm your selection.

Reset configuration?

 will appear on the display.

 Use the   and   sensor controls to select Yes or No and select OK to confirm your selection.

Switching off the Demo mode  

Demo mode allows the wine conditioning unit to be presented in the showroom without the cooling system being switched on . This setting is not needed for domestic use.

If Demo mode has been switched on as a default setting,    will show on the display.

 In Settings mode   , use the   and   sensor controls to select  Demo mode and select  OK to confirm your selection.

Press OK for 4 seconds to deactivate will appear on the display.

 Follow the instructions on the display.

The countdown Demo mode will deactivate in seconds will appear on the display.

Demo mode deactivated. Appliance cooling switched on will appear on the display.

 Confirm the message with OK .

The main screen will appear on the display again.

68

 / 

/

°C / °F

 / 

Selecting additional settings

Resetting the settings to their default settings  

You can reset the wine conditioning unit‘s settings to their default settings.

 In Settings mode   , use the   and   sensor controls to select  Factory default settings and select  OK to confirm your selection.

 Use the   and   sensor controls to select Reset and select OK to confirm your selection.

After a brief delay, Settings reset will appear on the display.

 Confirm the message with OK .

The initial commissioning process restarts (see “Starting up for the first time” in

“Initial commissioning”).

The wine conditioning unit‘s settings will be reset to the following values:

Function Default settings

Language

Display brightness

Colour scheme

Buzzer tones

Keypad tone

Temperature unit

Keypad lock

Door assistant

Miele@home

Ambient lighting

Ambient display

Sabbath mode

Humidity

Temperature in the wine conditioning zones

English

Middle value

(4 of 7 segments)

Dark

Middle value

(4 of 7 segments)

Middle value

(4 of 7 segments)

°Celsius

Switched off

Push2open

Switched off

Ambient 2

Temperature display

Switched off

Not increased

11 °C

69

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents