Setting the temperature. Miele KWT 2671 ViS

Add to my manuals
100 Pages

advertisement

Setting the temperature. Miele KWT 2671 ViS | Manualzz

The ideal temperature and humidity

Setting the temperature

 Touch the   sensor control to set the temperature.

The previously set temperatures for the

3 wine conditioning zones are displayed.

 Use the   and   sensor controls to select the wine conditioning zone for which you want to adjust the temperature and select  OK to confirm your selection.

 Use the   and   sensor controls to set the temperature. Keeping your fingers on the sensor controls changes the temperature continuously.

 Confirm the temperature setting with  OK or wait approx. 8 seconds after the last touch of the sensor control. The temperature will then be automatically adopted.

Tip: The newly set temperature can also be confirmed and adopted by closing the appliance door.

The temperature display always shows the required temperature.

If you have adjusted the temperature, wait for approx. 6 hours if the wine conditioning unit is not very full and for approx. 24 hours if the wine conditioning unit is full before checking the temperature display. It will take this long for the appliance to give an accurate reading.

 If, after this time, the temperature is still too high or too low, you will need to adjust it again.

Temperature range

In all three wine conditioning zones, it is possible to set temperatures between

5 °C and 20 °C.

Humidity

In most refrigerators, the humidity is too low for wine and therefore a refrigerator is not suitable for wine storage. Higher humidity levels are necessary when storing wine to moisturise natural corks from the outside. When the humidity is too low, the natural corks dry out and the bottle is no longer tightly sealed. For this reason, wine bottles should always be stored horizontally to ensure that natural corks are also moisturised from the inside. If air gets into the bottle, this will have a negative impact on the wine.

Tip: Humidity levels can be set separately for each wine conditioning zone.

Always increase the humidity level in a wine conditioning zone whenever you are using it to store wine bottles sealed with natural corks.

 Danger of damage from excess amounts of moisture.

An increase in humidity will lead to condensation on the interior cabinet walls. Condensate can cause damage such as corrosion to the wine conditioning unit.

Do not introduce additional moisture to air in the cabinet, e.g. by placing a dish of water in the wine conditioning unit.

74

The ideal temperature and humidity

Increasing the humidity  

If you have set a higher level of humidity, the fans will switch on automatically. This will distribute the humidity and the temperature evenly around the wine conditioning unit so that you can store all your wine under the same excellent conditions. The fans switch off automatically when the appliance door is opened and remain switched off for as long as it is kept open.

 Touch the   sensor control to set the temperature.

 Use the   and   sensor controls to select the wine conditioning zone for which you want to increase the humidity and select  OK to confirm your selection.

 Touch the   button.

The   button will then be highlighted in colour.

 Confirm the setting with OK or wait approx. 8 seconds after the last press of the button. The setting will be automatically adopted.

The humidity increases in the selected wine conditioning zone.

Not increasing the humidity  

 Touch the   sensor control to set the temperature.

 Use the   and   sensor controls to select the wine conditioning zone for which you do not want to increase the humidity and select  OK to confirm your selection.

 Touch the   button.

The   button will then no longer be highlighted in colour.

 Confirm the setting with OK or wait approx. 8 seconds after the last press of the button. The setting will be automatically adopted.

The humidity decreases in the selected wine conditioning zone.

75

Door alarm

Door alarm

An alarm will sound if the appliance door has been left open for longer than

2 minutes.

The message Close the door will also appear on the display.

As soon as the appliance door is closed, the alarm tone will stop and the message in the display will go out.

Switching the door alarm off early

If the alarm disturbs you, it can be turned off early.

 Touch the OK  sensor control.

The alarm will stop and the message will disappear from the display.

After a certain time, the alarm will sound again and the message will reappear on the display until the appliance door has been closed.

76

Storing wine bottles

Vibration and movement have a negative effect on the maturing process, which can in turn affect the taste of the wine.

To avoid disturbing other bottles when removing a bottle of wine, store bottles of the same type beside each other on the same shelf. Avoid stacking bottles on top of one another on the wooden shelves.

Always place the bottles in a horizontal position so that the natural corks can be kept moist on the inside and air is prevented from getting into the bottles.

Tip: We also recommend increasing the humidity level inside the wine conditioning unit for wine bottles with natural corks (see “Increasing the humidity   ” in

“The ideal temperature and humidity”).

 Risk of injury from falling wine bottles.

Wine bottles may become wedged in the wooden shelves above and fall out of the wine conditioning unit when the shelves are pulled out.

Always pull out the wooden shelves slowly and carefully.

 Risk of damage and injury from broken glass.

If wooden shelves and bottles protrude too far forwards, they may damage the glass door when it is closed.

Please ensure that the wooden shelves and wine bottles do not protrude.

Do not cover the vents in the rear wall, as they are essential for keeping the appliance cool.

77

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents