Preset tuning. Panasonic SAXR700, SA-XR700

Preset tuning

Presetting stations

n

Auto presetting

1 Tune to the frequency where you want to begin presetting. (

á

page 40)

Set the channel reception to FM 87.9 MHz or AM 530 kHz if you want automatic presetting to start from the lowest frequency.

Preset channels that are automatically assigned by this unit are:

FM: 1 to 30

AM: 21 to 30

Preset the FM stations first. If the AM stations are preset before the FM stations, they will be erased when the FM stations are preset.

-

MENU/

-

SETUP

2 Press to enter the MENU.

RETURN

3 Select “

TUNER

” and confirm the setting.

4 Select “

AUTO MEMO

” and confirm the setting.

5 Select “

START

” and press [ENTER].

Select “

CANCEL

” to cancel.

• During automatic presetting, the memory indicator (

M

) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset.

• The last station to be preset is displayed when presetting finishes.

• Frequencies may not be preset correctly when broadcast waves are too strong or too weak. In such cases, carry out presetting manually.

n

Manual presetting

1 Tune to the station you want to preset.

(

á

page 40)

2 Press

-

MENU/

-

SETUP

to enter the MENU.

RETURN

3 Select “

TUNER

” and confirm the setting.

4 Select “

MEMORY

” and confirm the setting.

5 Select a channel number and press [ENTER].

“

STORED

” is displayed.

• To continue presetting, press [TUNE

2

or

1

] to tune another station from step

1

.

6 Press [-MENU/–SETUP, RETURN] twice to select “

EXIT

” and press [ENTER].

• FM stations can also be preset in the MONO mode

(below).

Listening to preset stations

(Using the remote control)

n

Select the channel.

• Hold down the button to change channels faster.

n

Press the numbered buttons to select the channel.

Press

0

ENTER e.g. 21: [

≧

10, ENTER]

→

[2]

→

[1]

(Using the unit)

1 Press

-

MENU/

-

SETUP

to enter the MENU.

RETURN

2 Select “

TUNER

” and confirm the setting.

3 Select “

TUNE MODE

” and confirm the setting.

4 Select “

PRESET

” and confirm the setting.

5 Press [-MENU/–SETUP, RETURN] twice to select “

EXIT

” and press [ENTER].

TUNE

6 Press to select the channel.

• Hold down the button to change channels faster.

• Select “

MANUAL

” in step

4

when you wish to perform manual tuning (

á

page 40).

Reducing excessive noise (on the unit)

Select if noise is excessive during radio reception.

Press [-MENU/–SETUP, RETURN] to enter the MENU.

n

During FM stereo reception

You can improve FM reception by switching reception to monaural.

1 Select “

TUNER

” and confirm the setting.

2 Select “

FM MODE

” and confirm the setting.

3 Select “

MONO

” and confirm the setting.

• When this is set, “

MONO

” appears on the display.

• Select “

AUTO

” to cancel.

4 Press [-MENU/–SETUP, RETURN] twice to select “

EXIT

” and press [ENTER].

n

During AM reception

When there is a lot of noise interference with an AM broadcast, try switching to this mode.

1 Select “

TUNER

” and confirm the setting.

2 Select “

BEAT PROOF

” and confirm the setting.

3 Select “

MODE 1

” or “

MODE 2

” and confirm the setting.

4 Press [-MENU/–SETUP, RETURN] twice to select “

EXIT

” and press [ENTER].

41

RQT8739